泡沫金属管内含油制冷剂流动沸腾的压降特性

胡海涛; 朱禹; 彭浩; 丁国良; 孙硕

doi:10.3969/j.issn.0438-1157.2014.z2.015

您当前的位置：

首页 >

文章列表页 >

泡沫金属管内含油制冷剂流动沸腾的压降特性

流体力学与传递现象 | 更新时间：2025-12-10

- 泡沫金属管内含油制冷剂流动沸腾的压降特性
- Flow boiling pressure drop characteristics of refrigerant-oil mixture inside metal-foam filled tubes
- 化工学报 2014年第z2期页码：95-100
- 作者机构：
  
  1. 上海交通大学制冷与低温工程研究所,上海,200240
  2. 供热供燃气通风机空调工程北京市重点实验室,北京,100044
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.z2.015
  中图分类号： K124
- 网络首发：2014-12-30，
  
  纸质出版：2014-12-30
- 稿件说明：
移动端阅览
胡海涛, 朱禹, 彭浩, 等. 泡沫金属管内含油制冷剂流动沸腾的压降特性[J]. 化工学报, 2014,(z2):95-100.

HU Haitao, ZHU Yu, PENG Hao, et al. Flow boiling pressure drop characteristics of refrigerant-oil mixture inside metal-foam filled tubes[J]. CIESC Journal, 2014, (z2): 95-100.
胡海涛, 朱禹, 彭浩, 等. 泡沫金属管内含油制冷剂流动沸腾的压降特性[J]. 化工学报, 2014,(z2):95-100. DOI： 10.3969/j.issn.0438-1157.2014.z2.015.

HU Haitao, ZHU Yu, PENG Hao, et al. Flow boiling pressure drop characteristics of refrigerant-oil mixture inside metal-foam filled tubes[J]. CIESC Journal, 2014, (z2): 95-100. DOI： 10.3969/j.issn.0438-1157.2014.z2.015.

摘要

实验研究了含油制冷剂在泡沫金属换热管内流动沸腾的压降特性。实验流体为R410A和VG68油的混合物

油浓度范围为0~5%;泡沫金属结构分别为5 PPI和10 PPI

孔隙率为95%。实验结果表明:随着油浓度和泡沫金属PPI的增大

压降逐渐增加;管壁附近存在不完整的泡沫金属单元

减小了流体扰动

从而导致压降减小;随着管径的减小

泡沫金属内的压降减小

此变化规律与已有常规光管或微肋管内的变化规律不同。基于实验数据开发了泡沫金属管内含油制冷剂流动沸腾的压降关联式

关联式能够预测不同管径泡沫金属内的压降特性。

Abstract

The pressure drop characteristics of refrigerant-oil mixture flow boiling inside metal-foam filled tubes were investigated experimentally. The experimental fluid is R410A/VG68 oil

and the oil concentration range is 0—5%. The structure of the metal foam used in the experiments include PPI of 5 and 10

and porosity of 95%. The experimental results show that

as the oil concentration and PPI increases

the pressure drop increases. The incomplete cells nearby tube wall decreases the flow turbulence

resulting in the decrease of pressure drop

with the decrease of tube diameter

the pressure drop in metal-foam filled tubes decreases

which is different from that in smooth or microfin tubes. Based on the experimental data

the pressure drop correlation for refrigerant-oil mixture flow boiling inside metal-foam filled tubes was developed

and it can predict the pressure drop characteristics in metal-foam filled tubes with different diameters.

关键词

Keywords

references

浏览量

130

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

泡沫金属对圆管内R410A流动沸腾压降特性的影响

楔形歧管微通道内的过冷流动沸腾模拟研究

基于流型的R290水平管内流动沸腾压降实验研究

R1234ze（E）在泡沫金属管内的流动沸腾换热和压降特性

高热流条件下过冷沸腾流动阻力特性试验研究