汲液多孔蒸发制冷墙体的性能分析

陈威; 赵群力; 王记

doi:10.3969/j.issn.0438-1157.2014.z2.010

您当前的位置：

首页 >

文章列表页 >

汲液多孔蒸发制冷墙体的性能分析

流体力学与传递现象 | 更新时间：2025-12-10

- 汲液多孔蒸发制冷墙体的性能分析
- Analysis on cooling performance of porous pipes with water soaking-up ability for combining wall
- 化工学报 2014年第z2期页码：64-70
- 作者机构：
  
  上海海事大学商船学院,上海,201306
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.z2.010
  中图分类号： K124
- 网络首发：2014-12-30，
  
  纸质出版：2014-12-30
- 稿件说明：
移动端阅览
陈威, 赵群力, 王记. 汲液多孔蒸发制冷墙体的性能分析[J]. 化工学报, 2014,(z2):64-70.

CHEN Wei, ZHAO Qunli, WANG Ji. Analysis on cooling performance of porous pipes with water soaking-up ability for combining wall[J]. CIESC Journal, 2014, (z2): 64-70.
陈威, 赵群力, 王记. 汲液多孔蒸发制冷墙体的性能分析[J]. 化工学报, 2014,(z2):64-70. DOI： 10.3969/j.issn.0438-1157.2014.z2.010.

CHEN Wei, ZHAO Qunli, WANG Ji. Analysis on cooling performance of porous pipes with water soaking-up ability for combining wall[J]. CIESC Journal, 2014, (z2): 64-70. DOI： 10.3969/j.issn.0438-1157.2014.z2.010.

摘要

将汲液多孔材料管组合为蒸发制冷墙体。在室外温、湿度影响下

含湿多孔介质表面及内部水分蒸发制冷作用与管内部温度及温度梯度、含湿量和湿含量梯度相关联。含湿多孔管的蒸发可使其表面温度降低5~8℃

通过多孔材料汲水补充蒸发所需水分。风速和环境相对湿度耦合作用于含湿多孔管的表面蒸发。环境相对湿度较低时段

与风速为1 m·s-1相比

受2.5 m·s-1风速影响的含湿多孔管表面温度可降低2℃。含湿多孔管气相分率增加

其表面蒸发面积减少。实验分析了多孔材料管的汲液特性以及组合墙体中含湿多孔管排列方式对墙体制冷特性影响。

Abstract

The porous pipes with high water soaking-up ability have been combined for evaporative cooling wall. Due to the influences of the temperature and humidity outside

the evaporative cooling occurs on the porous pipe surface

which connects with the temperature and its gradient as well as the moisture content and its gradient in the porous pipe

and the temperature drop of 5—8℃ can be achieved in the experiment. The water sucked up by the porous pipes causes the continuation of the evaporative cooling. As the wind speed coupled with the relative humidity influences the evaporative cooling

the temperature drop of 2℃ on the pipe surface can be obtained at 2.5 m·s-1 than that at 1 m·s-1. The rise of gaseous phase in the porous pipe leads to the reduction of the evaporative area. The experiments have also been conducted to study the water soaking-up performance of the porous pipe and the influence of the porous pipe arrangement on the cooling of the combined wall.

关键词

Keywords

references

浏览量

173

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

空气流量对空冷燃料电池电堆性能的影响研究

高速高温箔片端面密封热气弹耦合性能分析

液滴撞击热壁面的动力学及汽化特性研究

新型矩形印刷电路板式换热器的数值研究

基于热质传递效应的准稳态结霜模型改进及数值验证