外凸式波节套管换热器壳程流动与传热机理的数值模拟

韩怀志; 李炳熙; 何玉荣; 邵伟

doi:10.3969/j.issn.0438-1157.2014.z1.014

您当前的位置：

首页 >

文章列表页 >

外凸式波节套管换热器壳程流动与传热机理的数值模拟

流体力学与传递现象 | 更新时间：2025-12-10

- 外凸式波节套管换热器壳程流动与传热机理的数值模拟
- Numerical simulation on flow and heat transfer characteristics in shell side of outward convex corrugated double-pipe heat exchangers
- 化工学报 2014年第S1期页码：85-94
- 作者机构：
  
  哈尔滨工业大学能源科学与工程学院,黑龙江,哈尔滨,150001
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.z1.014
  中图分类号： K172
- 网络首发：2014-05-30，
  
  纸质出版：2014-05-30
- 稿件说明：
移动端阅览
韩怀志, 李炳熙, 何玉荣, 等. 外凸式波节套管换热器壳程流动与传热机理的数值模拟[J]. 化工学报, 2014,(S1):85-94.

HAN Huaizhi, LI Bingxi, HE Yurong, et al. Numerical simulation on flow and heat transfer characteristics in shell side of outward convex corrugated double-pipe heat exchangers[J]. CIESC Journal, 2014, (S1): 85-94.
韩怀志, 李炳熙, 何玉荣, 等. 外凸式波节套管换热器壳程流动与传热机理的数值模拟[J]. 化工学报, 2014,(S1):85-94. DOI： 10.3969/j.issn.0438-1157.2014.z1.014.

HAN Huaizhi, LI Bingxi, HE Yurong, et al. Numerical simulation on flow and heat transfer characteristics in shell side of outward convex corrugated double-pipe heat exchangers[J]. CIESC Journal, 2014, (S1): 85-94. DOI： 10.3969/j.issn.0438-1157.2014.z1.014.

摘要

针对波节套管换热器壳程中的流动和传热机理进行了k-ε的数值模拟研究。采用六面体网格结合波节区域加密的特殊划分方法，进行了首层网格间距和主流区网格间距的无关性分析。数值模拟结果与经验公式进行对比，验证了数值模拟方法的准确性。对比分析了波节管和光管中流动和传热参数（速度、温度、湍动能和湍流耗散率）的性能差异，揭示了波节管的强化换热机理。同时，分析了波节管的局部Nusselt数和阻力降沿壁面的变化规律。结果表明流体在波节的去流侧形成了一个脱体旋涡，破坏了流体的速度边界层和温度边界层，同时使得其内部的摩擦阻力和热扩散能力明显提高，起到了明显的强化换热效应。

Abstract

The flow and heat transfer mechanism in the shell side of corrugated double-pipe heat exchanger are studied numerically based on the k-ε model. The independent analysis of first layer thickness and main flow region grid are carried out using hexahedral mesh in the whole region combined with dense mesh in the corrugation region. Compared the data from empirical formula with computational results

the accuracy of numerical methods is verified. The strengthening heat transfer mechanism is revealed by analyzing the difference of the flow and heat transfer parameters distribution (speed

temperature and turbulent kinetic energy and turbulence dissipation rate) between corrugated tube and smooth tube. Meanwhile

the local Nusselt numbers and pressure drop distributed law along the corrugation wall is also analyzed. The results indicate that the detached vortex formed at the downstream side of corrugation which resulting in an obvious effect of heat transfer augmentation destroys the velocity and temperature boundary layer meanwhile increase the frictional resistance and thermal diffusivity.

关键词

Keywords

references

浏览量

426

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

饱和气液相密度关联外推的新通用对比态方程

PEM电解制氢热管理建模及解耦控制设计与优化

煤基冷热电联供优化方法

基于化学语言的分子物化性质深度学习通用建模框架

气固两相流中双组分气-固及固-固EMMS曳力模型构建