新型垂直板规整填料流体力学及传质性能

胡剑光; 刘佳特; 袁猛; 于建国; 戴干策

doi:10.3969/j.issn.0438-1157.2014.01.015

您当前的位置：

首页 >

文章列表页 >

新型垂直板规整填料流体力学及传质性能

流体力学与传递现象 | 更新时间：2025-12-10

- 新型垂直板规整填料流体力学及传质性能
- Hydrodynamics and mass transfer characteristics of a novel vertical-sheet structured packing
- 化工学报 2014年第1期页码：116-122
- 作者机构：
  
  华东理工大学化学工程联合国家重点实验室,上海,200237
- 作者简介：
  
  胡剑光（1986-），男，博士研究生.
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.01.015
  中图分类号： Q021.4
- 网络首发：2014-01-05，
  
  纸质出版：2014-01-05
- 稿件说明：
移动端阅览
胡剑光, 刘佳特, 袁猛, 等. 新型垂直板规整填料流体力学及传质性能[J]. 化工学报, 2014,(1):116-122.

HU Jianguang, LIU Jiate, YUAN Meng, et al. Hydrodynamics and mass transfer characteristics of a novel vertical-sheet structured packing[J]. CIESC Journal, 2014, (1): 116-122.
胡剑光, 刘佳特, 袁猛, 等. 新型垂直板规整填料流体力学及传质性能[J]. 化工学报, 2014,(1):116-122. DOI： 10.3969/j.issn.0438-1157.2014.01.015.

HU Jianguang, LIU Jiate, YUAN Meng, et al. Hydrodynamics and mass transfer characteristics of a novel vertical-sheet structured packing[J]. CIESC Journal, 2014, (1): 116-122. DOI： 10.3969/j.issn.0438-1157.2014.01.015.

摘要

采用氧解吸实验，在直径190 mm的有机玻璃塔内，液相喷淋密度10～38 m3·m-2·h-1，F因子0.2～3.2 m·s-1·（kg·m-3）0.5的实验条件下测定了一种新型垂直板规整填料的流体力学及传质性能。实验结果表明：垂直板填料的操作压降及传质性能均显著优于商业波纹填料。通过与几种经改进的250型波纹填料相比发现，两者泛点F因子整体上相当；在较高液体喷淋密度下，垂直板填料传质性能及压降均高于改进250型波纹填料；在低喷淋密度下，垂直板填料可实现压降低于改进250型波纹填料，而两者传质性能相当。此外，对填料结构改进对其性能的影响进行了单因素考察。

Abstract

A novel vertical-sheet structured packing was developed to achieve better performance as compared with conventional structured packings. In order to evaluate hydrodynamics and mass transfer performance of the packing

desorption of oxygen from water was carried out in a packed column with 190 mm internal diameter operated at liquid load of 10—38 m3·m-2·h-1 and F factor of 0.2—3.2 m·s-1·(kg·m-3)0.5. The results show that compared with conventional structured packings with similar specific surface area

the pressure drop and the height of liquid transfer unit of the new packing are lower. The comparisons between the new packing and several improved structured packings with similar specific surface area demonstrate that the capacities of these packings are almost equivalent

while the mass transfer efficiency and pressure drop of the new packing are higher at high liquid load and its pressure drop is lower at low liquid load. For the influence of structure

it is shown that the high mass transfer efficiency of the new packing attributes largely to its novel geometry.

关键词

Keywords

references

浏览量

629

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于双流体模型的液氢流动沸腾数值模拟

微通道内MEA/MDEA混合溶液吸收CO2的传质特性

级间隙高度和表观气速对多级环流反应器混合和传质的影响

新型正交波纹板流体力学性能CFD模拟

规整填料塔中离子液体吸收CO2的传质与流体力学性能