基于质量守恒的LaserFace液体润滑机械密封数值分析

唐飞翔; 孟祥铠; 李纪云; 彭旭东

doi:10.3969/j.issn.0438-1157.2013.10.029

您当前的位置：

首页 >

文章列表页 >

基于质量守恒的LaserFace液体润滑机械密封数值分析

表面与界面工程 | 更新时间：2025-12-10

- 基于质量守恒的LaserFace液体润滑机械密封数值分析
- Numerical analysis of LaserFace liquid lubricated mechanical seal based on mass conservation
- 化工学报 2013年第10期页码：3694-3700
- 作者机构：
  
  浙江工业大学过程装备及其再制造教育部工程研究中心,浙江,杭州,310032
- 作者简介：
  
  唐飞翔(1987-),男,硕士研究生.
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.10.029
  中图分类号： H117.2
- 网络首发：2013-10-05，
  
  纸质出版：2013-10-05
- 稿件说明：
移动端阅览
唐飞翔, 孟祥铠, 李纪云, 等. 基于质量守恒的LaserFace液体润滑机械密封数值分析[J]. 化工学报, 2013,(10):3694-3700.

TANG Feixiang, MENG Xiangkai, LI Jiyun, et al. Numerical analysis of LaserFace liquid lubricated mechanical seal based on mass conservation[J]. CIESC Journal, 2013, (10): 3694-3700.
唐飞翔, 孟祥铠, 李纪云, 等. 基于质量守恒的LaserFace液体润滑机械密封数值分析[J]. 化工学报, 2013,(10):3694-3700. DOI： 10.3969/j.issn.0438-1157.2013.10.029.

TANG Feixiang, MENG Xiangkai, LI Jiyun, et al. Numerical analysis of LaserFace liquid lubricated mechanical seal based on mass conservation[J]. CIESC Journal, 2013, (10): 3694-3700. DOI： 10.3969/j.issn.0438-1157.2013.10.029.

摘要

针对传统Reynolds空化边界不能准确预测机械密封泄漏率的问题

采用JFO空化边界条件

建立了基于质量守恒的LaserFace液体润滑机械密封数学模型

采用流线迎风有限单元法求解润滑方程

对比分析了不同操作工况下4种不同端面型槽结构(普通端面、仅含引流槽端面、仅含回流槽端面、激光脸)的密封性能。结果表明:所建立数学模型可准确预测机械密封泄漏率

LaserFace端面在低速时易于打开

高速低压下回流槽具有明显回流泵送作用

LaserFace端面机械密封泄漏率显著低于仅含引流槽端面

摩擦系数小于普通端面

综合性能明显优于其他型槽结构。

Abstract

The Jakobsson-Floberg-Olsson(JFO)cavitation boundary condition was used to solve the problem that traditional Reynolds cavitation boundary condition can not accurately predict the mechanical seal leakage rate.The mathematical model of LaserFace liquid lubricated mechanical seal(LF-MS)was established based on mass conservation.Lubrication equation was solved by the streamline upwind finite element method.The comparison of sealing performance among four types of a LF-MS

a general face seal

a general face seal with "entry flow" structures

a general face seal with "return flow" structures was performed under different operating conditions.The mathematical model could accurately predict the mechanical seal leakage rate.LF-MS end face was easy to open at a low speed

Return grooves had obvious return pumping action at a high speed and low pressure.The leakage rate of LF-MS was significantly lower than a general face seal with "entry flow" structures.The friction coefficient of LF-MS was smaller than that of the general end face.The overall performance was significantly better than the others.

关键词

Keywords

references

浏览量

351

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

波度和锥度对液体润滑机械密封空化特性影响

瑞利台阶型机械密封空化冷却流动湍流效应分析

曲折式与阵列式迷宫阀芯结构内流动与空化特性研究

原油储罐重质沉积物超声波空化微射流清洗实验及数值模拟

有限元数值模拟在高性能锂二次电池设计中的应用进展