基于离散单元法的丝状颗粒传热数学模型

朱立平1; 2; 袁竹林1; 闫亚明2; 罗登山2; 王宏生2; 李斌2

doi:10.3969/j.issn.0438-1157.2012.07.008

您当前的位置：

首页 >

文章列表页 >

基于离散单元法的丝状颗粒传热数学模型

流体力学与传递现象 | 更新时间：2025-12-10

- 基于离散单元法的丝状颗粒传热数学模型
- Model of heat transfer in filamentous granular materials based on discrete element method
- 化工学报 2012年第7期页码：2051-2058
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2012.07.008
  中图分类号：
- 网络首发：2012-07-05，
  
  纸质出版：2012-07-05
- 稿件说明：
移动端阅览
朱立平1, 2, 袁竹林1, 等. 基于离散单元法的丝状颗粒传热数学模型[J]. 化工学报, 2012,(7):2051-2058.

ZHU Liping1, 2, YUAN Zhulin1, et al. Model of heat transfer in filamentous granular materials based on discrete element method[J]. CIESC Journal, 2012, (7): 2051-2058.
朱立平1, 2, 袁竹林1, 等. 基于离散单元法的丝状颗粒传热数学模型[J]. 化工学报, 2012,(7):2051-2058. DOI： 10.3969/j.issn.0438-1157.2012.07.008.

ZHU Liping1, 2, YUAN Zhulin1, et al. Model of heat transfer in filamentous granular materials based on discrete element method[J]. CIESC Journal, 2012, (7): 2051-2058. DOI： 10.3969/j.issn.0438-1157.2012.07.008.

摘要

丝状颗粒作为一类长径比较大的非球形颗粒，其传热特性及相关技术广泛应用于工农业生产的诸多领域。但目前颗粒在运动过程中传热问题的研究还很不充分，特别是对于丝状颗粒，更是缺乏有效的数学模型进行描述。从颗粒传热机理出发，提出了一种基于离散单元法的丝状颗粒传热模型，模型中综合考虑了颗粒碰撞（接触）传热、颗粒的内部导热以及颗粒与气体间的对流换热。利用该模型，对固定床中堆积丝状颗粒的热量迁移过程进行了数值模拟，着重比较了各种传热方式对传热过程的影响。研究表明，对流换热对整体传热量的贡献较大。此外，还获得了不同工况下颗粒温度随时间的变化规律。

Abstract

Filamentous particle is a kind of non-spherical particles with large aspect ratio.It has been widely applied in industrial and agricultural processes.However

the heat transfer phenomenon about particles is not well understood

especially the filamentous particle.In this study

in order to describe the heat transfer process of filamentous particle

a new mathematical model based on the discrete element method was proposed through the analysis of heat transfer mechanisms.The impact heat transfer between particles

the internal heat conduction and the convection heat exchange between gas and particles were considered in this model

and then it was used to numerically study the heat transfer process of filamentous particles in a fixed bed.Comparing the mechanisms with each other

it showed that the convection heat exchange had greater contribution to the total heat transfer.In addition

the simulation results revealed some internal temperature rules in filamentous particles under different operating conditions.

关键词

Keywords

references

浏览量

443

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于LBM-DEM的鼓泡床内气泡-颗粒动力学数值模拟

三维喷动床内异径干湿颗粒混合特性数值模拟

固定床中丝状颗粒的传热传质特性

不同SK型静态混合器的流场特性及其混合效果分析

带有突扩比的新型流道结构对海水激活电池性能的影响