循环流化床U型回料阀的特性

张思海; 陈陆剑; 张缦; 陶欣; 张守玉; 杨海瑞

doi:10.11949/j.issn.0438-1157.20190219

您当前的位置：

首页 >

文章列表页 >

循环流化床U型回料阀的特性

更新时间：2026-07-24

- 循环流化床U型回料阀的特性
- Characteristics of U-type return valve of circulating fluidized bed
- 化工学报 2019年70卷第8期页码：2954-2960
- 作者机构：
  
  1.宁夏国华宁东发电有限公司，宁夏银川 750408
  2.上海理工大学能源与动力工程学院，上海 200093
  3.清华大学能源与动力工程系，电力系统及发电设备控制和仿真国家重点实验室，北京 100084
- 作者简介：
  
  张思海（1984—），男，工程师，544919049@qq.com
  杨海瑞（1972—），男，博士，教授，yhr@mail.tsinghua.edu.cn
- 基金信息：
  
  国家自然基金联合基金项目(U1810126)
- DOI：10.11949/j.issn.0438-1157.20190219
  中图分类号： TQ 028.8
- 收稿：2019-03-11，
  
  修回：2019-06-08，
  
  网络首发：2026-07-24，
  
  纸质出版：2019-08-05
- 稿件说明：
移动端阅览
张思海, 陈陆剑, 张缦, 陶欣, 张守玉, 杨海瑞. 循环流化床U型回料阀的特性[J]. 化工学报, 2019, 70(8): 2954-2960

ZHANG Sihai, CHEN Lujian, ZHANG Man, TAO Xin, ZHANG Shouyu, YANG Hairui. Characteristics of U-type return valve of circulating fluidized bed[J]. CIESC Journal, 2019, 70(8): 2954-2960
张思海, 陈陆剑, 张缦, 陶欣, 张守玉, 杨海瑞. 循环流化床U型回料阀的特性[J]. 化工学报, 2019, 70(8): 2954-2960 DOI： 10.11949/j.issn.0438-1157.20190219.

ZHANG Sihai, CHEN Lujian, ZHANG Man, TAO Xin, ZHANG Shouyu, YANG Hairui. Characteristics of U-type return valve of circulating fluidized bed[J]. CIESC Journal, 2019, 70(8): 2954-2960 DOI： 10.11949/j.issn.0438-1157.20190219.

摘要

实验对循环流化床物料回送系统的关键部件——U型回料阀的工作特性进行了研究，具体研究了系统中循环流率与主床流化风速和松动风量的关系，以及通过改变U型阀横段开口尺寸，研究横段结构特征对U型阀返料特性的影响。当主床流化风速不变时，随着松动风量的增加，循环流率先线性增大，然后基本保持恒定；当松动风量一定时，系统的最大循环流率与主床流化风速基本为线性关系；实验中得出最佳孔口面积约为料腿截面面积的25%。

Abstract

The investigation of U-type nonmechanical recycling valve is carried out on a cold-circulating fluidized bed (CFB) test facility. The size of the cross section of the valve is used to study the influence of the structural characteristics of the cross section on the return characteristics of the U-type valve. The influence of horizontal opening of U-valve on solids circulating rate are also studied. When the fluidizing gas velocity is constant

the solid circulating rate increases linearly first and then reaches constant. At a given loosing gas rate

the maximal circulating rate of system depends mainly on the fluidizing gas velocity. The optimized opening ratio of the horizontal section is about 25% cross section area of the standpipe.

关键词

Keywords

references

Yang S , Yang H , Zhang H , et al . Impact of operating conditions on the performance of the external loop in a CFB reactor [J ] . Chemical Engineering and Processing , 2009 , 48 ( 4 ): 921 - 926 .

冯俊凯 , 岳光溪 , 吕俊复 . 循环流化床燃烧锅炉 [M ] . 北京 : 中国电力出版社 , 2003 : 40 .

Feng J K , Yue G X , Lyu J F . Circulating Fluidized Bed Combustion Boiler [M ] . Beijing : China Electric Power Press , 2003 .

牛长山 , 齐勇 , 光昕 , 等 . 循环床沸腾炉物料循环技术的试验研究 [J ] . 动力工程 , 1991 , 11 ( 4 ): 31 - 37 .

Niu Z S , Qi Y , Guang X , et al . Experimental study on solid circulation systems of circulating fluidized bed boilers [J ] . Power Engineering , 1991 , 11 ( 4 ): 31 - 37 .

骆仲泱 , 倪明江 , 程乐鸣 , 等 . 循环流化床返料机构的研究 [J ] . 浙江大学学报(工学版) , 1991 , 25 ( 3 ): 284 - 293 .

Luo Z Y , Ni M J , Cheng L M , et al . Research on the solid recycle systems for circulating fluidized bed [J ] . Journal of Zhejiang University(Engineering Science) , 1991 , 25 ( 3 ): 284 - 293 .

Knowlton T M . L-valve characterized for solids flow-design parameters examined for valve use in coal gasification [J ] . Hydrocarbon Processing , 1978 , 57 : 149 - 156 .

Geldart D . The behaviour of L-valves with granular powders [J ] . Powder Technology , 1991 , 67 ( 2 ): 163 - 174 .

Yang W C , Knowlton T M . L-valve equations [J ] . Powder Technology , 1993 , 77 ( 1 ): 49 - 54 .

吕俊复 , 杨海瑞 , 王昕 , 等 . 循环流化床 J 型阀性能的冷态实验研究 [J ] . 应用基础与工程科学学报 , 2000 , 8 ( 2 ): 201 - 206 .

Lyu J F , Yang H R , Wang X , et al . Cold investigation on the performance of a J-valve for circulating fluidized beds [J ] . Journal of Basic Science and Engineering , 2000 , 8 ( 2 ): 201 - 206 .

Knowlton T M , Hirsan I , Leung L S . The effect of aeration tap location on the performance of a J-valve [C ] //Proceedings of Second Engineering Foundation Conference on Fluidization. Cambridge, England , 1978 : 128 - 133 .

Cheng L , Basu P . Effect of pressure on loop seal operation for a pressurized circulating fluidized bed [J ] . Powder Technology , 1999 , 103 ( 3 ): 203 - 211 .

彭莉 , 李洪钟 , 朱庆山 . U型阀结构下颗粒流态化排料的数学模型 [J ] . 过程工程学报 , 2012 , 12 ( 3 ): 382 - 387 .

Peng L , Li H Z , Zhu Q S . Hydrodynamic modeling on fluidization discharging of particles under U-shape valve structure [J ] . The Chinese Journal of Process Engineering , 2012 , 12 ( 3 ): 382 - 387 .

Basu P . Combustion and Gasification in Fluidized Beds [M ] . Boca Raton : CRC Press , 2006 : 417 - 437 .

杨雪平 . CFB炉膛风帽区域与回料阀内两相流动特性的研究 [D ] . 上海 : 上海交通大学 , 2009 .

Yang X P . Research on characteristics of gas-solid flow in air nozzle area in the furnace and U-valve in CFB boiler [D ] . Shanghai : Shanghai Jiao Tong University , 2009 .

Basu P , Cheng L . An analysis of loop seal operations in a circulating fluidized bed [J ] . Chemical Engineering Research & Design , 2000 , 78 ( 7 ): 991 - 998 .

Cheng L , Basu P , Cen K . Solids circulation rate prediction in a pressurized loop-seal [J ] . Chemical Engineering Research & Design , 1998 , 76 ( 6 ): 761 - 763 .

Basu P , Luo Z , Boyd M , et al . An experimental investigation into a loop seal in a circulating fluidized bed [C ] //The 6th Int. Conf. on Circulating Fluidized Beds. Würzburg , 1999 : 22 - 27 .

Fox D , Molodtsof Y , Large J F . Control mechanisms of fluidized solids circulation between adjacent vessels [J ] . AIChE Journal , 1989 , 35 ( 12 ): 1933 - 1941 .

Ishida M , Shirai T . Circulation of solid particles within the fluidized bed with a draft tube [J ] . Journal of Chemical Engineering of Japan , 1975 , 8 ( 6 ): 477 - 481 .

王志锋 , 梁鹏 , 董众兵 , 等 . 循环流化床改进型U阀及其返料特性的实验研究 [J ] . 中北大学学报（自然科学版） , 2006 , 27 ( 4 ): 324 - 327 .

Wang Z F , Liang P , Dong Z B , et al . Experimental research on an improved U-valve of CFB and its returning characteristics [J ] . Journal of North University of China(Natural Science Edition) , 2006 , 27 ( 4 ): 324 - 327 .

杨建华 , 屈卫东 , 杨义波 . HG-440t/h循环流化床锅炉回料阀运行特性分析 [J ] . 锅炉技术 , 2004 , 35 ( 4 ): 27 - 31 .

Yang J H , Qu W D , Yang Y B . Analysis of the operation features of HG-440t/h CFBB particle valve [J ] . Boiler Technology , 2004 , 35 ( 4 ): 27 - 31 .

Yang H , Zhang H , Yang S , et al . Effect of bed pressure drop on performance of a CFB boiler [J ] . Energy & Fuels , 2009 , 23 ( 6 ): 2886 - 2890 .

Wang P , Lu J , Xing W , et al . Impact of loop seal structure on gas solid flow in a CFB system [J ] . Powder Technology , 2014 , 264 : 177 - 183 .

姚宣 , 杨石 , 晁俊楠 , 等 . 循环流率对循环流化床回路压降影响的实验研究 [J ] . 中国电机工程学报 , 2010 , 30 ( 20 ): 1 - 6 .

Yao X , Yang S , Chao J N , et al . Experiment study of solids circulating rate s effect on the pressure loop in circulating fluidized bed [J ] . Proceedings of the CSEE , 2010 , 30 ( 20 ): 1 - 6 .

Kim S W , Namkung W , Kim S D . Solid recycle characteristics of loop‐seals in a circulating fluidized bed [J ] . Chemical Engineering & Technology , 2001 , 24 ( 8 ): 843 - 849 .

Cai R , Zhang M , Mo X , et al . Experimental research on the unstable performances of parallel external loops in the circulating fluidized bed [J ] . Chemical Engineering Research and Design , 2018 , 139 : 1 - 11 .

Horio M . Hydrodynamics [M ] //Circulating Fluidized Beds. Dordrecht : Springer , 1997 : 21 - 85 .

杨石 . 多分离器并联循环流化床系统气固流动的偏流研究 [D ] . 北京 : 清华大学 , 2011 .

Yang S . Study on gas solid flow non-uniformity in a circulating fluidized bed with parallel cyclones [D ] . Beijing : Tsinghua University , 2011 .

Kuramoto M , Kunii D , Furusawa T . Flow of dense fluidized particles through an opening in a circulation system [J ] . Powder Technology , 1986 , 47 ( 2 ): 141 - 149 .

王擎 , 孙东红 , 孙键 , 等 . 有侧吹风环流料封阀水平孔口流动阻力特性 [J ] . 化工学报 , 2000 , 51 ( 5 ): 703 - 707 .

Wang Q , Sun D H , Sun J , et al . Flow resistance through horizontal orifice of loop seal with side aeration air [J ] . Journal of Chemical Industry and Engineering (China) , 2000 , 51 ( 5 ): 703 - 707 .

Jones D R M , Davidson J F . The flow of particles from a fluidised bed through an orifice [J ] . Rheologica Acta , 1965 , 4 ( 3 ): 180 - 192 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

入口结构对18 m气固循环流化床提升管内颗粒流动特性的影响

基于气固两相流的双循环流化床提升管压降模型的预测和实验研究

循环流化床提升管T形弯头动态压力的小波分析

流化床内自由移动石墨球表面的传热系数

提升管出口T型弯头压降特性的实验分析