基于扁管的蒸发式冷凝器管外传热传质特性研究

单思宇; 谭宏博

doi:10.11949/j.issn.0438-1157.20190033

您当前的位置：

首页 >

文章列表页 >

基于扁管的蒸发式冷凝器管外传热传质特性研究

流体力学与传递现象 | 更新时间：2020-06-24

- 基于扁管的蒸发式冷凝器管外传热传质特性研究
- Study on heat and mass transfer characteristics outside flat tube for evaporative condensers
- 化工学报 2019年第S1期页码：69-78
- 作者机构：
  
  西安交通大学制冷与低温工程系，陕西西安 710049
- 作者简介：
  
  单思宇（1995—），女，硕士研究生，shansy@stu.xjtu.edu.cn
  谭宏博（1982—），男，博士，副教授，hongbotan@xjtu.edu.cn
- 基金信息：
  
  国家重点研发计划项目(2018YFB0904400)
- DOI：10.11949/j.issn.0438-1157.20190033
  中图分类号： TK 172
- 收稿：2019-01-09，
  
  修回：2019-01-18，
- 稿件说明：
移动端阅览
单思宇, 谭宏博. 基于扁管的蒸发式冷凝器管外传热传质特性研究[J]. 化工学报, 2019, 70(S1): 69-78

SHAN Siyu, TAN Hongbo. Study on heat and mass transfer characteristics outside flat tube for evaporative condensers[J]. CIESC Journal, 2019, 70(S1): 69-78
单思宇, 谭宏博. 基于扁管的蒸发式冷凝器管外传热传质特性研究[J]. 化工学报, 2019, 70(S1): 69-78 DOI： 10.11949/j.issn.0438-1157.20190033.

SHAN Siyu, TAN Hongbo. Study on heat and mass transfer characteristics outside flat tube for evaporative condensers[J]. CIESC Journal, 2019, 70(S1): 69-78 DOI： 10.11949/j.issn.0438-1157.20190033.

摘要

强化蒸发式冷凝器管外传热传质可有效降低系统能耗，利用Fluent软件，结合自编译程序及组分输运模型对扁管蒸发式冷凝器管外传热传质过程建模，选取了等周长圆管模型进行比较，研究了二者传热传质性能的差异。通过研究管外液膜厚度及速度，以及管外温度分布和含湿量的变化规律，对比了扁管和圆管的平均表面传热系数，结果表明扁管的平均表面传热系数于圆管提升了9.04%。模拟了风速从1.5 m·s

-1

变化至3 m·s

-1

以及喷淋密度从0.15 kg·m

-1

·s

-1

增加至0.3 kg·m

-1

·s

-1

时对扁管式蒸发式冷凝器换热的影响，得到随着风速及喷淋密度的增加其平均表面传热系数分别增加了5.68%和30.26%。对扁管式蒸发式冷凝器管外的传热传质特性的研究为其应用提供了理论指导。

Abstract

Enhancement of the heat and mass transfer outside the tube of evaporative condensers can effectively reduce the energy consumption in a refrigeration system. The improving characteristics of heat and mass transfer outside a flat tube for evaporative condensers were investigated. Numerical simulation of the heat and mass transfer on the flat tube was carried out in Fluent using user define functions and component transport models. The heat transfer performance of a circular tube with the same perimeter was compared with that of the flat tube. The thickness and velocity of the liquid film outside the tube

the temperature distribution and the variation of moisture content outside the tube are studied

and the average heat transfer coefficients of the flat tube and the circular tube are compared. The results show that the average heat transfer coefficient of the flat tube is 9.04% higher than that of the circular tube. In addition

the influence of wind speed and spray density on the heat transfer of flat tube evaporative condenser is calculated. The wind speed varies from 1.5 m·s

-1

to 3 m·s

-1

and the spray density varies from 0.15 kg·m

-1

·s

-1

to 0.3 kg·m

-1

·s

-1

. The results show that the average heat transfer coefficient increases by 5.68% and 30.26% respectively. Investigating the heat and mass transfer characteristics outside a flat tube for evaporative condensers provides theoretical guidance for the application of the flat tube in evaporative condensers.

关键词

Keywords

references

尹正 , 张文玲 . 我国冷却设备行业发展现状及展望 [J]. 制冷技术 , 2015 , 8 : 86 - 88 .

Yin Z , Zhang W L . Development status and outlook for China cooling equipment industry in 2014 [J]. Refrigeration Technology , 2015 , 8 : 86 - 88 .

朱东生 , 孙荷静 , 蒋翔 . 蒸发式冷凝器的研究现状及其应用 [J]. 流体机械 , 2008 , 36 ( 8 ): 28 - 34 .

Zhu D S , Sun H J , Jiang X . Research progress and application of evaporative condenser [J]. Fluid Machinery , 2008 , 36 ( 8 ): 28 - 34 .

Fiorentino M , Starace G . Numerical investigations on two-phase flow modes in evaporative condensers [J]. Applied Thermal Engineering , 2016 ， 94 : 777 - 785 .

Dreyer A A , Erens P J . Heat and mass transfer coefficient and pressure drop correlations for a crossflow evaporative cooler [C] //Proceeding of the International Heat Transfer Conference . Jerusalem , 1990 .

Mizushina T , Ito R , Miyashita H . Experimental study of an evaporative cooler [J]. International Chemical Engineering , 1967 , 7 ( 4 ): 727 - 732 .

Jahangeer K A , Tay A A O , Islam M R . Numerical investigation of transfer coefficients of an evaporatively-cooled condenser [J]. Applied Thermal Engineering , 2011 : 1655 - 1663 .

Islam M R , Jahangeer K A , Chua K J . Experimental and numerical study of an evaporatively-cooled condenser of air-conditioning systems [J]. Energy , 2015 , ( 87 ): 390 - 399 .

Acunha J I C , Schneider P S . Numerical simulation of air-water flows in an evaporative condenser [J]. Thermal Engineering , 2009 , 8 ( 1 ): 24 - 30 .

朱冬生 , 张景卫 , 吴治将 , 等 . 板式蒸发式冷凝器两相降膜流动CFD模拟及传热研究 [J]. 华南理工大学学报(自然科学版) , 2008 , 36 ( 7 ): 6 - 10 .

Zhu D S , Zhang J W , Wu Z J , et al . CFD simulation and investigation into heat transfer for falling film with two-phase flow in plate-type evaporative condenser [J]. Journal of South China University of Technology (Natural Science Edition) , 2008 , 36 ( 7 ): 6 - 10 .

王定标 , 万方方 , 周俊杰 . 蒸发式冷凝器异型扁管性能分析及数值模拟 [J]. 郑州大学学报（工学版） , 2010 , 31 ( 2 ): 64 - 67 .

Wang D B , Wan F F , Zhou J J . Performance analysis and numerical simulation of evaporative condenser with special-shaped flat tube [J]. Journal of Zhengzhou University(Engineering Science) , 2010 , 31 ( 2 ): 64 - 67 .

Tsay Y L , Lin T F . Evaporation of a heated falling liquid film into a laminar gas stream [J]. Experimental Thermal and Fluid Science , 1995 , 11 ( 7 ): 61 - 71 .

罗林聪 . 水平异形管降膜蒸发流动与传热强化机理及实验研究 [D]. 济南 : 山东大学 , 2014 .

Luo L C . Analysis of flow and heat transfer enhancement and experimental research on falling film evaporation on horizontal shaped tubes [D]. Jinan : Shandong University , 2014 .

Fiorentino M , Starace G . A numerical model to investigate evaporative condensers behaviour at tube scale [C] // ASME 2014-12th Biennial Conference on Engineering Systems and Analysis . American Society of Mechanical Engineering , 2014 .

程嫚 . 水平管外水风传热传质数值模拟 [D]. 武汉 : 华中科技大学 , 2014 .

Cheng M . Numerical simulation of heat and mass transfer of water and air outside the horizontal tube [D]. Wuhan : Huazhong University of Science and Technology , 2014 .

Parker R O , Treybal R E . The heat mass transfer characteristics of evaporative coolers [J]. AIChE Chemical Engineering Progress Symposium Series , 1962 , 57 ( 32 ): 138 - 149 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

蒸发冷却冷水机组的原理、性能与适用性分析

液滴撞击热壁面的动力学及汽化特性研究

基于热质传递效应的准稳态结霜模型改进及数值验证

翅片式椭圆套管蒸发式冷凝器传热传质性能实验研究

水平圆管降膜蒸发式冷凝器热力性能计算分析