The Li3VO4 coated LiNi0.8Co0.1Mn0.1O2 cathode material was synthesized by wet fusion technology and high temperature solid phase method. The crystalline phase
morphology and microstructure of materials were studied by X-ray diffraction (XRD)
scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that Li3VO4 is evenly coated on the surface of LiNi0.8Co0.1Mn0.1O2 without changing the material structure and morphology of the raw materials. The coating thickness is 1-2 nm. The modification of LiNi0.8Co0.1Mn0.1O2 cathode material with different content of Li3VO4 shows that 3%(mass) Li3VO4 coated LiNi0.8Co0.1Mn0.1O2 has a capacity retention rate of 94.13% after 100 cycles under 1 C
which has the best multiplier performance and cycling performance. In addition
cyclic voltammetry (CV) and alternating current impedance (EIS) analysis show that Li3VO4 can increase Li+ conductivity
inhibit the side-effect between active material and electrolyte
and improve the electrochemical properties of materials.