LI Yannan, CHENG Jun, LIU Jianzhong, et al. CO2removal from biohythane by absorption in ionic liquid[P66614][Triz]loaded on molecular sieve SBA-15[J]. CIESC Journal, 2018, (6): 2526-2532. DOI: 10.11949/j.issn.0438-1157.20171364.
LI Yannan, CHENG Jun, LIU Jianzhong, et al. CO2removal from biohythane by absorption in ionic liquid[P66614][Triz]loaded on molecular sieve SBA-15[J]. CIESC Journal, 2018, (6): 2526-2532. DOI: 10.11949/j.issn.0438-1157.20171364.DOI:
was impregnated on molecular sieves SBA-15 with two different pore diameters for removing CO2 in biohythane. The hybrid absorbents were characterized by N2 adsorption analyzer
scanning electron microscopy (SEM)
high-resolution transmission electron microscopy (HRTEM). Compared to SBA-15 (6.6 nm) -50%[Triz]
SBA-15 (4.3 nm) -50%[Triz] had higher CO2 absorption capacity and absorbing rate by an increase of 12.4% and 95.1%
respectively. The shorter pore length of SBA-15 (4.3 nm) allowed[P66614][Triz] inner pores to contact CO2 during adsorption process
hence SBA-15 (4.3 nm) -50%[Triz] had more IL reactive sites than SBA-15 (6.6 nm) -50%[Triz]. CO2 absorption in SBA-15 (4.3 nm) -50%[Triz] under different hythane gas flowrate was further studied and fitted with two adsorption kinetic models. The results show that CO2 adsorption bySBA-15 (4.3 nm) -50%[Triz] follows better with pseudo-second order adsorption dynamic model
indicating that the adsorption process is controlled by chemical adsorption mechanism and CO2 removal by[P66614] [Triz] is a chemical reaction process.