隔板式内循环流化床颗粒循环速率实验与模型

江国栋; 魏利平; 吴长松; 彭浏畅; 何楠; 陈志文

doi:10.11949/j.issn.0438-1157.20170561

您当前的位置：

首页 >

文章列表页 >

隔板式内循环流化床颗粒循环速率实验与模型

流体力学与传递现象 | 更新时间：2025-12-10

- 隔板式内循环流化床颗粒循环速率实验与模型
- Experimental and model studies on particle circulation rate in internal circulating clapboard-type fluidized bed
- 化工学报 2017年第9期页码：3427-3433
- 作者机构：
  
  西北大学化工学院, 陕北能源先进化工利用技术教育部工程研究中心,陕西,西安,710069
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20170561
  中图分类号： Q530.2
- 网络首发：2017-09-05，
  
  纸质出版：2017-09-05
- 稿件说明：
移动端阅览
江国栋, 魏利平, 吴长松, 等. 隔板式内循环流化床颗粒循环速率实验与模型[J]. 化工学报, 2017,(9):3427-3433.

JIANG Guodong, WEI Liping, WU Changsong, et al. Experimental and model studies on particle circulation rate in internal circulating clapboard-type fluidized bed[J]. CIESC Journal, 2017, (9): 3427-3433.
江国栋, 魏利平, 吴长松, 等. 隔板式内循环流化床颗粒循环速率实验与模型[J]. 化工学报, 2017,(9):3427-3433. DOI： 10.11949/j.issn.0438-1157.20170561.

JIANG Guodong, WEI Liping, WU Changsong, et al. Experimental and model studies on particle circulation rate in internal circulating clapboard-type fluidized bed[J]. CIESC Journal, 2017, (9): 3427-3433. DOI： 10.11949/j.issn.0438-1157.20170561.

摘要

在不同操作参数及结构参数下对隔板式内循环流化床的颗粒内循环速率进行了实验研究，研究了高速区和低速区的流化速度、静床层高度、隔板间隙等参数对颗粒内循环流动的影响。结果表明这4个参数对颗粒内循环速率都有显著的影响，当其他3个参数确定时，随着其中一个参数的增加，颗粒内循环速率均呈现先增加后减小的趋势，这一结果表明，颗粒内循环过程是多种操作和结构参数的非线性复杂系统。为预测颗粒内循环速率，修正了La Nauze 模型，该模型无须提供压降参数即可计算颗粒内循环速率，对于多种颗粒，其计算结果和实验相差在23%之内。

Abstract

The influence of fluidization velocity in high and low velocity regions

height of static bed

and clapboard gap on internal flow of particles in internal circulating clapboard-type fluidized bed were experimentally studied by changing operating conditions and structural parameters. The results showed that the particle circulation rate was significantly affected by these four parameters. The particle circulation rate first increased and then decreased with the increase of one parameter while the other three parameters were kept unchanged. Hence

particle circulation is a nonlinear complex system of multiple operational and structural parameters. The La Nazue model was modified to predict the particle circulation rate without providing pressure drop between clapboard gap. The error between the calculated and experimental results for various particles was within 23%.

关键词

Keywords

references

浏览量

192

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

自然循环窄矩形通道内过冷沸腾两相摩擦阻力特性

bubble-based EMMS/PFB模型的建立及在加压流化床浓相段的应用

颗粒相壁面条件对非球形颗粒流动影响的数值模拟

摇摆条件下圆管内过冷沸腾局部空泡时空分布特性

水平管内凝结液液位角