含开放金属位点MIL-101(Cr)掺杂的混合基质膜制备及其CO<sub>2</sub>分离性能

郭翔宇; 阳庆元

doi:10.11949/j.issn.0438-1157.20170553

您当前的位置：

首页 >

文章列表页 >

含开放金属位点MIL-101(Cr)掺杂的混合基质膜制备及其CO₂分离性能

材料化学工程与纳米技术 | 更新时间：2025-12-10

- 含开放金属位点MIL-101(Cr)掺杂的混合基质膜制备及其CO₂分离性能
- Preparation and CO₂ separation performance of mixed matrix membranes incorporated with open metal sites-containing MIL-101(Cr)
- 化工学报 2017年第11期页码：4323-4332
- 作者机构：
  
  北京化工大学化学工程学院, 有机-无机复合材料国家重点实验室,北京,100029
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20170553
  中图分类号： Q028.8
- 网络首发：2017-11-05，
  
  纸质出版：2017-11-05
- 稿件说明：
移动端阅览
郭翔宇, 阳庆元. 含开放金属位点MIL-101(Cr)掺杂的混合基质膜制备及其CO₂分离性能[J]. 化工学报, 2017,(11):4323-4332. DOI: 10.11949/j.issn.0438-1157.20170553.

GUO Xiangyu, YANG Qingyuan. Preparation and CO₂ separation performance of mixed matrix membranes incorporated with open metal sites-containing MIL-101(Cr)[J]. CIESC Journal, 2017, (11): 4323-4332. DOI: 10.11949/j.issn.0438-1157.20170553.
郭翔宇, 阳庆元. 含开放金属位点MIL-101(Cr)掺杂的混合基质膜制备及其CO₂分离性能[J]. 化工学报, 2017,(11):4323-4332. DOI: 10.11949/j.issn.0438-1157.20170553. DOI：

GUO Xiangyu, YANG Qingyuan. Preparation and CO₂ separation performance of mixed matrix membranes incorporated with open metal sites-containing MIL-101(Cr)[J]. CIESC Journal, 2017, (11): 4323-4332. DOI: 10.11949/j.issn.0438-1157.20170553. DOI：

摘要

以结构中含有开放金属位点的MIL-101（Cr）作为填料与3种不同的聚合物复合制备了混合基质膜，从填料结构、聚合物性质及填料-聚合物界面状况等角度对混合基质膜的CO2分离性能进行了分析。结果表明，由于MIL-101（Cr）较大的孔道尺寸以及结构中开放金属Cr（Ⅲ）位点与CO2分子间的Lewis酸碱作用，其掺杂能够同时显著提高PSF膜的CO2通量及分离因子。而当聚合物渗透性及选择性较高时，MIL-101（Cr）的掺杂仅提高了气体通量，CO2分离因子则略有降低。当聚合物分子链柔性较大时，MIL-101（Cr）的表面孔道会被分子链堵塞，造成混合基质膜气体通量的显著下降。

Abstract

Mixed matrix membranes (MMMs) were prepared by combining open metal sites-containing MIL-101(Cr) with three different kinds of polymers. CO2 separation performance of these prepared MMMs was further examined from the aspects of filler structure

polymer properties

and filler-polymer interface conditions. Benefiting from the large pore aperture and strong Lewis acid-base interactions between the open Cr(Ⅲ) sites and CO2 molecules

the incorporation of MIL-101(Cr) can greatly improve the gas permeability and separation factor of PSF membrane. The results indicate that when polymer with high selectivity and permeability is used

only the gas permeability is improved with the CO2 separation factor slightly decreased. When polymer with high chain mobility is used

the surface pores could be blocked by the polymer chains

leading to obvious decrease in gas permeability of the MMMs.

关键词

Keywords

references

浏览量

228

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

包封碳纳米管金属有机框架用于痕量CO2分离

利用空位和缺陷工程协同效应提高Pebax膜的CO2分离

磷酸糖与高浓度磷酸盐的高效纳滤分离

PDMS/芦丁改性β-CD-MOFs混合基质膜的制备及2-苯乙醇渗透汽化分离性能

聚氧化乙烯/冠醚共混膜及其二氧化碳分离性能

含开放金属位点MIL-101(Cr)掺杂的混合基质膜制备及其CO2分离性能

Preparation and CO2 separation performance of mixed matrix membranes incorporated with open metal sites-containing MIL-101(Cr)

DOI：10.11949/j.issn.0438-1157.20170553

摘要

Abstract

关键词

Keywords

references

含开放金属位点MIL-101(Cr)掺杂的混合基质膜制备及其CO₂分离性能

Preparation and CO₂ separation performance of mixed matrix membranes incorporated with open metal sites-containing MIL-101(Cr)