2-氯-5-三氯甲基吡啶电化学氢化脱氯合成2-氯-5-甲基吡啶

王一想; 陈泽伟; 张雯; 徐颖华; 马淳安

doi:10.11949/j.issn.0438-1157.20161591

您当前的位置：

首页 >

文章列表页 >

2-氯-5-三氯甲基吡啶电化学氢化脱氯合成2-氯-5-甲基吡啶

催化、动力学与反应器 | 更新时间：2025-12-10

- 2-氯-5-三氯甲基吡啶电化学氢化脱氯合成2-氯-5-甲基吡啶
- Electrochemical hydrodechlorination of 2-chloro-5-trichloromethylpyridine to 2-chloro-5-methylpyridine
- 化工学报 2017年第5期页码：1882-1891
- 作者机构：
  
  1. 浙江工业大化学工程学院, 绿色化学合成技术国家重点实验室培育基地,浙江,杭州,310032
  2. 河南质量工程职业学院,河南,平顶山,467000
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161591
  中图分类号： Q151.5
- 网络首发：2017-05-05，
  
  纸质出版：2017-05-05
- 稿件说明：
移动端阅览
王一想, 陈泽伟, 张雯, 等. 2-氯-5-三氯甲基吡啶电化学氢化脱氯合成2-氯-5-甲基吡啶[J]. 化工学报, 2017,(5):1882-1891.

WANG Yixiang, CHEN Zewei, ZHANG Wen, et al. Electrochemical hydrodechlorination of 2-chloro-5-trichloromethylpyridine to 2-chloro-5-methylpyridine[J]. CIESC Journal, 2017, (5): 1882-1891.
王一想, 陈泽伟, 张雯, 等. 2-氯-5-三氯甲基吡啶电化学氢化脱氯合成2-氯-5-甲基吡啶[J]. 化工学报, 2017,(5):1882-1891. DOI： 10.11949/j.issn.0438-1157.20161591.

WANG Yixiang, CHEN Zewei, ZHANG Wen, et al. Electrochemical hydrodechlorination of 2-chloro-5-trichloromethylpyridine to 2-chloro-5-methylpyridine[J]. CIESC Journal, 2017, (5): 1882-1891. DOI： 10.11949/j.issn.0438-1157.20161591.

摘要

2-氯-5-三氯甲基吡啶（TCMP）选择性氢化脱氯制备2-氯-5-氯甲基吡啶（CCMP）或2-氯-5-甲基吡啶（CMP）在农药“吡虫啉”合成中具有重要应用价值。首先在弱酸性的甲醇/乙酸/水混合溶剂中研究了TCMP电化学脱氯合成CCMP或CMP的可行性；其次，研究了阴极材料和电解液组成对TCMP选择性脱氯反应的影响；最后，采用膜厚度极距的板框式电解槽分别研究了阴、阳极支持电解质对电解槽压和电流密度与底物浓度对脱氯反应效率的影响。实验结果表明，在弱酸性的甲醇/乙酸/水混合溶剂中，TCMP能在银网阴极上高选择性的氢化脱氯成CMP；CMP收率从高到低的阴极依次为：银> 铜> 锌> 铅> 钛> 石墨> 镍。阴阳极支持电解质从四丁基高氯酸铵分别换成乙酸锂和硫酸，电解槽压大幅度下降。降低电流密度和提高底物浓度有利于TCMP电化学氢化脱氯效率。在优化条件下（阴极液：含10%乙酸+5%水+0.2 mol·L-1乙酸锂的甲醇溶液；阴极：银网；电流密度：333 A·m-2；温度：30℃），0.2 mol·L-1 TCMP 能高效地转化为CMP（收率：91%），电流效率可达54%，电解槽压大约为3.0 V。

Abstract

Electrochemical hydrodechlorination of 2-chloro-5-trichloromethylpyridine (TCMP) for the synthesis of 2-chloro-5-chloromethylpyridine (CCMP) or 2-chloro-5-methylpyridine (CMP) has important application in preparation of imidacloprid. Feasibility of electrochemical hydrodechlorination of TCMP to CCMP or CMP was first investigated in a weak acidic solvent mixture of methanol

acetic acid and water. Then

influence of cathode material and catholyte composition on electrochemical hydrodechlorination was studied. Finally

influence of supporting catholyte and anolyte on cell voltage and influence of current density and TCMP concentration on efficiency of electrochemical hydrodechlorination were investigated in a plate and frame cell. The experimental results show that: TCMP can be selectively hydrodechlorinated to CMP on a silver mesh cathode in the weak acidic solvent mixture

which cathode material with CMP production rate from high to low is silver

copper

zinc

lead

titanium

graphite

and nickel. Cell voltage is decreased substantially when lithium acetate (CH3COOLi) and sulfuric acid are used to replace tetrabutylammonium perchlorate (TBAP) as supporting cantholyte and anolyte. Efficiency of electrochemical hydrodechlorination is increased by reducing current density and raising initial concentration of TCMP. Under optimized condition (catholyte: 0.2 mol·L-1 CH3COOLi in 10%(vol) CH3COOH and 5%(vol) methanol aqueous solution. Cathode silver mesh

current density 333 A·m-2

temperature 30℃). 0.2 mol·L-1 TCMP is hydrodechlorinated to CMP with yield of 91% at current efficiency of 54% and cell voltage of 3.0 V.

关键词

Keywords

references

浏览量

226

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于机器学习的改型歧管式微通道热沉流动传热特性多目标优化

固体蓄冷填充床性能提升及保冷特性研究

PMMA涂胶隔膜对软包锂离子电池制程及性能影响研究

煤基冷热电联供优化方法

基于深度强化学习的某异构生产线工厂生产智能排产