基于椭圆管束菱形受热面的流动与传热性能分析

袁宝强; 王沛丽; 杜文静

doi:10.11949/j.issn.0438-1157.20161539

您当前的位置：

首页 >

文章列表页 >

基于椭圆管束菱形受热面的流动与传热性能分析

流体力学与传递现象 | 更新时间：2025-11-26

- 基于椭圆管束菱形受热面的流动与传热性能分析
- Simulation on heat transfer and flow characteristics of rhombus heat transfer surface with elliptical tube bundles
- 化工学报 2016年第S2期页码：136-141
- 作者机构：
  
  山东大学能源与动力工程学院,山东,济南,250061
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161539
  中图分类号： K124
- 网络首发：2016-12-30，
  
  纸质出版：2016-12-30
- 稿件说明：
移动端阅览
袁宝强, 王沛丽, 杜文静. 基于椭圆管束菱形受热面的流动与传热性能分析[J]. 化工学报, 2016,(S2):136-141.

YUAN Baoqiang, WANG Peili, DU Wenjing. Simulation on heat transfer and flow characteristics of rhombus heat transfer surface with elliptical tube bundles[J]. CIESC Journal, 2016, (S2): 136-141.
袁宝强, 王沛丽, 杜文静. 基于椭圆管束菱形受热面的流动与传热性能分析[J]. 化工学报, 2016,(S2):136-141. DOI： 10.11949/j.issn.0438-1157.20161539.

YUAN Baoqiang, WANG Peili, DU Wenjing. Simulation on heat transfer and flow characteristics of rhombus heat transfer surface with elliptical tube bundles[J]. CIESC Journal, 2016, (S2): 136-141. DOI： 10.11949/j.issn.0438-1157.20161539.

摘要

圆形管束菱形受热面在流动与传热方面表现出传热能力强、流动阻力大、吹灰方便等特点。以此为基础，提出了一种基于椭圆管束的菱形受热面。椭圆管束菱形受热面保持了圆形管束菱形受热面传热能力强和吹灰方便的特点，同时显著降低了烟气侧流动阻力。采用数值模拟方法，分析了叉排椭圆管束不同迎风角下的流动传热特性，与叉排圆形管束进行了对比，给出了各特征参数随Reynolds数的变化规律。模拟结果表明，迎风角为0°的叉排椭圆管束菱形受热面较圆形管束传热效果好，流动阻力小，综合性能高。

Abstract

Rhombus heat transfer surface with staggered circular tubes bundles (CTB)performed high heat transfer capacity

large fluid flow resistance and high efficiency in ash blowing.Based on that

a new rhombus heat transfer surface with staggered elliptical tube bundles (ETB)was proposed.The new heat transfer surface maintained the high heat transfer coefficient and efficiency in ash blowing of CTB

which also showed lower resistance characteristic.2D numerical simulations of rhombus heat transfer surface with CTB and ETB were presented to conduct improving the performance in heat transfer and fluid flow.The effects of different upwind angels (-45°

0°

45°)of ETB were discussed.To obtain an understanding of the physical behavior of thermal and fluid flow

different Reynolds numbers ranging from 3000 to 21000 were calculated.Entropy generation principle was used to investigate the heat transfer performance.Results showed that compared with CTB and other ETB

ETB with 0° upwind angel had higher heat transfer coefficient and lower flow resistance

comprehensive properties of which was better.

关键词

Keywords

references

浏览量

120

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于机器学习的改型歧管式微通道热沉流动传热特性多目标优化

高速高温箔片端面密封热气弹耦合性能分析

压力波强化横掠管束传热实验研究

固体蓄冷填充床性能提升及保冷特性研究

数据中心液体冷却技术研究综述