热膨胀系数简易测量装置研制及若干材料测量

黄永华; 吴哲; 李晓慈; 董巨辉

doi:10.11949/j.issn.0438-1157.20161403

您当前的位置：

首页 >

文章列表页 >

热膨胀系数简易测量装置研制及若干材料测量

流体力学与传递现象 | 更新时间：2025-11-26

- 热膨胀系数简易测量装置研制及若干材料测量
- Development of simple thermal expansion coefficient measurement apparatus and its application to several materials
- 化工学报 2016年第S2期页码：38-45
- 作者机构：
  
  上海交通大学制冷与低温工程研究所,上海,200240
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20161403
  中图分类号： B302.1TB303
- 网络首发：2016-12-30，
  
  纸质出版：2016-12-30
- 稿件说明：
移动端阅览
黄永华, 吴哲, 李晓慈, 等. 热膨胀系数简易测量装置研制及若干材料测量[J]. 化工学报, 2016,(S2):38-45.

HUANG Yonghua, WU Zhe, LI Xiaoci, et al. Development of simple thermal expansion coefficient measurement apparatus and its application to several materials[J]. CIESC Journal, 2016, (S2): 38-45.
黄永华, 吴哲, 李晓慈, 等. 热膨胀系数简易测量装置研制及若干材料测量[J]. 化工学报, 2016,(S2):38-45. DOI： 10.11949/j.issn.0438-1157.20161403.

HUANG Yonghua, WU Zhe, LI Xiaoci, et al. Development of simple thermal expansion coefficient measurement apparatus and its application to several materials[J]. CIESC Journal, 2016, (S2): 38-45. DOI： 10.11949/j.issn.0438-1157.20161403.

摘要

以液氮为冷源，研制了一套基于千分测微器的材料热膨胀系数简易测量装置，能够测量80~353 K温区各类固体材料的热膨胀系数，可重复性高于99.3%，不确定度小于3.34%。通过将T1紫铜、6060铝、304不锈钢、尼龙、G10环氧树脂等典型材料热膨胀系数测量数据与文献数据比较，发现两者最大相对偏差小于6.0%，80~353 K温区的平均偏差约为3.1%。在此基础上，测量并获得了高低温热环境工程等应用场合常用到的其他一些材料如殷钢、6262铝、316不锈钢、45钢、聚四氟乙烯、ABS塑料等的热膨胀系数数据。

Abstract

With liquid nitrogen as coolant

a simple thermal expansion coefficient measurement apparatus for solid materials was developed based on a micrometer.It can be applied in the temperature range from 80 K to 353 K.The thermal expansion coefficient of serval typical materials such as copper T1

aluminum 6060

stainless steel 304

nylon and epoxy G10 were measured and compared with literature data.The repeatability and relative uncertainty of the present data were found to be higher than 99.3% and less than 3.34%

respectively.The maximum relative deviation and the mean deviation between the measuring data and literature data were less than 6.0% and 3.1% respectively in the temperature range from 80 K to 353 K.Based on the verification

the expansion coefficient of some other materials widely applied in high/low temperature environment engineering such as invar

aluminum 6062

stainless steel 316

carbon steel 45

Teflon and ABS plastics were also measured.

关键词

Keywords

references

浏览量

182

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

-15℃下Na+， K+， Mg2+//Cl-， NO3-， SO42--H2O体系相平衡研究

SBBR反应器中耐冷微生物的驯化与识别

第Ⅲ族元素磷化物热力学性质理论研究

低温耐硫甲烷化催化剂硫化过程

低温吸湿复合吸附剂的制备及吸湿性能