不同充汽方式下供汽系统动态特性仿真

马彪; 李彦军; 郭家敏; 张国磊; 宋福元; 李健; 曾帅; 张晓宇

doi:10.11949/j.issn.0438-1157.20160528

您当前的位置：

首页 >

文章列表页 >

不同充汽方式下供汽系统动态特性仿真

过程系统工程 | 更新时间：2025-12-10

- 不同充汽方式下供汽系统动态特性仿真
- Dynamic characteristics simulation of steam supplying system in different steam charging ways
- 化工学报 2016年第S1期页码：326-333
- 作者机构：
  
  1. 哈尔滨工程大学动力与能源工程学院,黑龙江,哈尔滨,150001
  2. 中国船舶重工集团公司第703研究所,黑龙江,哈尔滨,150078
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160528
  中图分类号： Q028.8
- 网络首发：2016-08-31，
  
  纸质出版：2016-08-31
- 稿件说明：
移动端阅览
马彪, 李彦军, 郭家敏, 等. 不同充汽方式下供汽系统动态特性仿真[J]. 化工学报, 2016,(S1):326-333.

MA Biao, LI Yanjun, GUO Jiamin, et al. Dynamic characteristics simulation of steam supplying system in different steam charging ways[J]. CIESC Journal, 2016, (S1): 326-333.
马彪, 李彦军, 郭家敏, 等. 不同充汽方式下供汽系统动态特性仿真[J]. 化工学报, 2016,(S1):326-333. DOI： 10.11949/j.issn.0438-1157.20160528.

MA Biao, LI Yanjun, GUO Jiamin, et al. Dynamic characteristics simulation of steam supplying system in different steam charging ways[J]. CIESC Journal, 2016, (S1): 326-333. DOI： 10.11949/j.issn.0438-1157.20160528.

摘要

以供汽系统为研究对象，采用集总参数法建立相应的数学模型，进行充汽阀自动控制充汽和旁通阀自动控制充汽两种充汽方式的动态仿真。结果表明：旁通阀自动控制充汽时完成3次充放汽时间为76.3 s，充汽阀自动控制充汽时完成3次充放汽时间为62.9 s，充汽阀自动控制充汽时平均每次充汽时间减少4.5 s；两种充汽方式关键参数在充汽阶段均维持较为稳定，在阀门切换阶段存在较大波动，但压力波动均小于0.2 MPa；相同充汽方式下，汽包压力波动< 过热蒸汽压力波动< 供汽母管压力波动。

Abstract

With steam supplying system as the object of the research

the mathematical models are based on the lumped parameter theory. The study has been carried out in two different charging ways. One of them is charging valve in Auto-Control and the other is bypass valve in Auto-Control. The simulation results show as follows.The time to complete three times charging and discharging is 76.3 seconds when bypass valve is in Auto-Control. The time to complete three times charging and discharging is 62.9 seconds when charging valve is in Auto-Control. 4.5 seconds have been saved for each charging when charging valve is in Auto-Control. The key parameters maintain relatively stable during the charging period in both charging ways. The main parameters have relatively larger fluctuations when the two valves are being switched on. But the main parameters are less than 0.2 MPa. In the same charging way

the fluctuation of drum pressure is less than the fluctuation of superheated steam pressure

and the fluctuation of superheated steam pressure is less than the fluctuation of steam supplying pipe pressure.

关键词

Keywords

references

浏览量

111

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

碳化硅泡沫陶瓷空气吸热器性能数值模拟

斯特林发动机与高温热管耦合运行特性研究

双U型地埋管群跨季节蓄热特性研究

充装量及筒体长度对车载LNG气瓶共振频率影响的数值模拟分析

天然气混输管网热值波动过程模拟