液位控制系统干预下小孔全过程泄漏速率模型

付建民; 张伯伦; 陈国明; 郑晓云; 叶闯; 郭超; 朱渊

doi:10.11949/j.issn.0438-1157.20160506

您当前的位置：

首页 >

文章列表页 >

液位控制系统干预下小孔全过程泄漏速率模型

其他 | 更新时间：2025-11-26

- 液位控制系统干预下小孔全过程泄漏速率模型
- Hole-leakage rate model of whole process based on intervention of liquid level control system
- 化工学报 2017年第1期页码：473-480
- 作者机构：
  
  1. 中国石油大学(华东)海洋油气装备与安全技术研究中心,山东,青岛,266580
  2. 大连港股份有限公司,辽宁,大连,116600
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160506
  中图分类号： 937
- 网络首发：2017-01-05，
  
  纸质出版：2017-01-05
- 稿件说明：
移动端阅览
付建民, 张伯伦, 陈国明, 等. 液位控制系统干预下小孔全过程泄漏速率模型[J]. 化工学报, 2017,(1):473-480.

FU Jianmin, ZHANG Bolun, CHEN Guoming, et al. Hole-leakage rate model of whole process based on intervention of liquid level control system[J]. CIESC Journal, 2017, (1): 473-480.
付建民, 张伯伦, 陈国明, 等. 液位控制系统干预下小孔全过程泄漏速率模型[J]. 化工学报, 2017,(1):473-480. DOI： 10.11949/j.issn.0438-1157.20160506.

FU Jianmin, ZHANG Bolun, CHEN Guoming, et al. Hole-leakage rate model of whole process based on intervention of liquid level control system[J]. CIESC Journal, 2017, (1): 473-480. DOI： 10.11949/j.issn.0438-1157.20160506.

摘要

泄漏速率是计算泄漏量、确定泄漏持续时间及评估泄漏风险的前提和基础，通过搭建液相储罐小孔泄漏实验系统，构建不同泄漏场景，对比液位控制系统干预下的泄漏速率变化情况，并结合泄漏速率模型计算值进行分析。结果表明：液位控制系统响应后，泄漏速率下降速度变缓，并随时间推移逐渐开始回升，最后稳定在某值处达到稳态泄漏，进出流量对储罐小孔泄漏速率的影响基本可忽略。通过改进储罐泄漏经典公式，建立基于实际液位控制系统干预条件下的储罐小孔泄漏速率模型，提出泄漏孔口高压修正系数计算方法和模型，通过验证分析证明该模型可有效提高液位控制系统干预下泄漏速率计算精度。

Abstract

Leakage rate is the premise and basis of leakage mass calculation

leakage duration determination and leak risk assessment.Through building a tank experiment system of liquid hole-leakage for different leak scenes and contrasting the variation of the leakage rate under the interventions of the liquid level control system

an analysis is carried out combined with the calculation of leakage rate model.The result shows that after the response of liquid level control system

the leakage rate reduces slowly and gradually increases as time goes on.Finally

the leakage rate stays in a stable leakage state.The influence of the flow rate on the hole-leakage rate of the tank can be neglected.Hole-leakage rate model of tank based on the actual liquid level control system is built through improving classic formula of tank leakage.The calculation method and the model of high pressure hole-leakage correction coefficient are proposed.By verification

the model can efficiently improve the calculation accuracy under the interventions of the liquid level control system.

关键词

Keywords

references

浏览量

245

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

同向双螺杆传热系数计算模型的分析与验证

节流作用下CO2管道放空过程的冻堵风险实验研究

甲烷爆炸对建筑物内外压力场分布的影响

基于KECA的非线性工业过程故障检测与诊断新方法

含90°直角弯管结构受限空间油气泄压爆炸实验与大涡模拟研究