氨基树脂表面活化提高固定化核酸酶P<sub>1</sub>连续催化性能

何林姣; 刘晓静; 黄金莎; 庄伟; 应汉杰

doi:10.11949/j.issn.0438-1157.20160280

您当前的位置：

首页 >

文章列表页 >

氨基树脂表面活化提高固定化核酸酶P₁连续催化性能

生物化学工程与技术 | 更新时间：2025-12-10

- 氨基树脂表面活化提高固定化核酸酶P₁连续催化性能
- Fortified continous catalytic properties of immobilized nuclease P₁ with surface activated HA amino resin
- 化工学报 2016年第9期页码：3850-3860
- 作者机构：
  
  1. 南京工业大学材料化学工程国家重点实验室,江苏,南京,210009
  2. 南京工业大学制药与生物工程学院国家生化工程技术研究中心,江苏,南京,211816
  3. 南京工业大学江苏先进生物与化学制造协同创新中心,江苏,南京,211816
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160280
  中图分类号： 814
- 网络首发：2016-09-05，
  
  纸质出版：2016-09-05
- 稿件说明：
移动端阅览
何林姣, 刘晓静, 黄金莎, 等. 氨基树脂表面活化提高固定化核酸酶P₁连续催化性能[J]. 化工学报, 2016,(9):3850-3860. DOI: 10.11949/j.issn.0438-1157.20160280.

HE Linjiao, LIU Xiaojing, HUANG Jinsha, et al. Fortified continous catalytic properties of immobilized nuclease P₁ with surface activated HA amino resin[J]. CIESC Journal, 2016, (9): 3850-3860. DOI: 10.11949/j.issn.0438-1157.20160280.
何林姣, 刘晓静, 黄金莎, 等. 氨基树脂表面活化提高固定化核酸酶P₁连续催化性能[J]. 化工学报, 2016,(9):3850-3860. DOI: 10.11949/j.issn.0438-1157.20160280. DOI：

HE Linjiao, LIU Xiaojing, HUANG Jinsha, et al. Fortified continous catalytic properties of immobilized nuclease P₁ with surface activated HA amino resin[J]. CIESC Journal, 2016, (9): 3850-3860. DOI: 10.11949/j.issn.0438-1157.20160280. DOI：

摘要

考察了固定化酶常用载体-氨基树脂几何结构及表面活化过程对固定化核酸酶P1性能的影响，并进行了动力学和连续催化稳定性研究。FESEM、BET及FTIR等表征发现，氨基树脂具有大量酶可利用的孔，在固定化过程中核酸酶P1主要利用的孔径范围为4～30 nm。相对游离的核酸酶P1而言，所得固定酶耐酸、耐热性增强；米氏动力学研究表明各组固定酶对底物的亲和力下降，最大反应速率下降；后交联组的重复利用性相对物理吸附、化学交联组明显增强。优化的固定化条件为：酶和载体比例为3：20（质量比），酶浓度为0.8 g·L-1，酶液pH为6.0，固定时间为10 h，在优化条件下所得固定酶的单位载体酶活为10013 U·g-1。同时设计及优化柱连续反应器操作条件，确定反应温度为65℃，进料流量为0.75 ml·min-1，使得产品的核苷酸浓度维持30 g·L-1（水解率为60%）以上的累计时长达120 h，有利于核酸酶P1连续生产核苷酸的工业化应用。

Abstract

The effect of HA amino resin (immobilized enzyme widely-used carrier) geometry and surface activated process on the immobilized nuclease P1's properties was studied. In addition

the dynamic analysis and continuous catalytic properties were also investigated. FESEM

BET and FTIR characterization were utilized to verify that HA amino resin had a great deal of enzymes available hole and the scope of the main hole was 4-30 nm in the immobilized process. Compared with free nuclease P1

the acid resistance and heat resistance of the immobilized enzymes were improved. The study on Michael's Mention kinetics indicated that the substrate affinity and maximum reaction rate of immobilized enzymes decreased; the reusability of after crosslinking group was significantly enhanced compared to physical adsorption and chemical crosslinking groups. The optimized conditions of immobilization were as follows:the enzyme to carrier ratio of 3:20 (mass ratio)

enzyme concentration of 0.8 g·L-1 and 10 h immobilized time at pH 6.0. Under these conditions

the immobilized enzyme activity was about 10013 U·g-1. Furthermore

the operating conditions of column flow reactor were designed and optimized. The continuous running time of the reactor was up to 120 h at 30 g·L-1 products nucleotide concentration (hydrolysis rate of 60%)

when the reaction temperature was 65℃ with substrate flow rate of 0.75 ml·min-1. This work would be beneficial to the application of nuclease P1 in nucleotide continuous industrial production.

关键词

Keywords

references

浏览量

217

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

煤焦油沥青基碳气凝胶微球的制备及分析

环氧氯丙烷与离子液体的交联过程研究

吡咯亚胺钒络合物催化制备含功能性乙氧基硅烷聚乙烯

融合物理信息的发酵过程时空图卷积网络模型

温和条件下太阳能光热催化氨合成与分解的研究进展

氨基树脂表面活化提高固定化核酸酶P1连续催化性能

Fortified continous catalytic properties of immobilized nuclease P1 with surface activated HA amino resin

DOI：10.11949/j.issn.0438-1157.20160280

摘要

Abstract

关键词

Keywords

references

氨基树脂表面活化提高固定化核酸酶P₁连续催化性能

Fortified continous catalytic properties of immobilized nuclease P₁ with surface activated HA amino resin