亲水改性碳钢极板用于PM<sub>2.5</sub>脱除

徐纯燕; 常景彩; 王翔; 张静; 崔琳; 张波; 马春元

doi:10.11949/j.issn.0438-1157.20160150

您当前的位置：

首页 >

文章列表页 >

亲水改性碳钢极板用于PM_2.5脱除

能源和环境工程 | 更新时间：2025-11-26

- 亲水改性碳钢极板用于PM_2.5脱除
- PM_2.5 collection using surface-modified hydrophilic carbon steel collector
- 化工学报 2016年67卷第10期页码：4446-4454
- 作者机构：
  
  1. 山东大学燃煤污染物减排国家工程实验室,山东,济南,250061
  2. 山东神华山大能源环境有限公司,山东,济南,250000
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160150
  中图分类号： 51
- 网络首发：2016-10-05，
  
  纸质出版：2016-10-05
- 稿件说明：
移动端阅览
徐纯燕, 常景彩, 王翔, 等. 亲水改性碳钢极板用于PM_2.5脱除[J]. 化工学报, 2016,67(10):4446-4454. DOI: 10.11949/j.issn.0438-1157.20160150.

XU Chunyan, CHANG Jingcai, WANG Xiang, et al. PM_2.5 collection using surface-modified hydrophilic carbon steel collector[J]. CIESC Journal, 2016, 67(10): 4446-4454. DOI: 10.11949/j.issn.0438-1157.20160150.
徐纯燕, 常景彩, 王翔, 等. 亲水改性碳钢极板用于PM_2.5脱除[J]. 化工学报, 2016,67(10):4446-4454. DOI: 10.11949/j.issn.0438-1157.20160150. DOI：

XU Chunyan, CHANG Jingcai, WANG Xiang, et al. PM_2.5 collection using surface-modified hydrophilic carbon steel collector[J]. CIESC Journal, 2016, 67(10): 4446-4454. DOI: 10.11949/j.issn.0438-1157.20160150. DOI：

摘要

火电厂大气污染物排放标准日趋严格，湿式静电除尘器作为终端治理设备逐渐得到广泛应用。以亲水改性刚性极板为研究对象，建立了卧式湿式静电除尘器中试实验台，开展了PM2.5脱除特性的实验研究，研究了改性极板表面水膜增强颗粒物脱除效率的机制，考察了气体温度、停留时间、工作电压、初始浓度、冲洗水流量等主要运行参数对颗粒物脱除效率的影响规律。结果表明：改性刚性极板表面的纤维层可以减少反冲气流，减少颗粒的电迁移阻力；表面在小水量情况下亦可维持均匀稳定的水膜，水膜的存在抑制了反电晕和二次扬尘的发生，使得电晕电流高且水膜蒸发使烟气湿度提高，颗粒荷电量和电迁移速度提高，这两方面均提高了颗粒脱除效率。停留时间延长、工作电压提高均会引起颗粒脱除效率的增加，但颗粒物入口浓度、冲洗水流量对颗粒脱除效率影响不大。使用改性刚性极板的湿式静电除尘器可减少阳极冲洗水量，对粒径0.04～0.48 μm的颗粒有较高脱除效率，可在低电压下达到较高的颗粒物总脱除效率，具有较好的应用前景。

Abstract

Fine particles with aerodynamic diameters of <2.5 μm (PM2.5) are significant pollution sources. Dust emission is restricted to less than 10 mg·m-3 under 6% oxygen in eastern China and wet electrostatic precipitators (ESPs) are encouraged for efficient removal of various fine particles in aerosol

especially in coal-fired power plant where strict air pollutant emission standards drive wide use of wet ESP as terminal control equipment. Previous studies showed wetting properties of a hydrophilically modified rigid collector and this study focused on fine particle collection performance of the modified collector at pilot scale. The characteristics of PM2.5 collection

mechanism of uniform water film and effect of main operation parameters on enhancement of particle collection efficiency were investigated. The results showed that the surface fiber layer of the modified rigid collectors reduced flue gas recoiling and particle electro-transportation resistance. A uniform and stable water film was maintained on surfaces of the modified rigid collectors at low washing water flowrate

which inhibited back corona occurrence and a secondary entrainment of dust as well as increased discharge current and flue gas humidity by evaporation of water film. The increase of particle charge number and electro-transportation speed enhanced the particle collection efficiency. With the increase of flue gas temperature

both discharge current and thermophoresis force gradually increased which could improve the particle collection efficiency. However

the increase of gas viscosity reduced the particles collection efficiency. The extension of residence time and the increase of applied voltage improved particle collection

whereas the inlet concentration of particles and the flushing water flowrate had little influence on particle collection. The wet ESPs of modified rigid collectors exhibited reduction of circulating water consumption per square meter by 86 percent and significant increase of particle collection efficiency for ultrafine particles with size of 0.04-0.48 μm as well as overall collection efficiency of all particles at low electric voltage. Hence

the modified rigid collectors had good potentials for application.

关键词

Keywords

references

浏览量

166

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

湿法脱硫装置对燃煤锅炉PM2.5排放特征的影响

柔性MOFs材料Cu(BDC)的氨气吸附及可逆转化性能

聚丙烯中空纤维膜气体除尘性能

化学团聚促进电除尘脱除烟气中PM2.5和SO3

燃煤电厂煤粉炉及CFB锅炉PM2.5产生及排放特性的现场实验研究

亲水改性碳钢极板用于PM2.5脱除

PM2.5 collection using surface-modified hydrophilic carbon steel collector

DOI：10.11949/j.issn.0438-1157.20160150

摘要

Abstract

关键词

Keywords

references

亲水改性碳钢极板用于PM_2.5脱除

PM_2.5 collection using surface-modified hydrophilic carbon steel collector