碳纳米管/环氧树脂复合纤维棉宏量制备及其吸油性能

南辉; 王冲; 王刚; 林红; 韦浩民; 王子玲

doi:10.11949/j.issn.0438-1157.20141432

您当前的位置：

首页 >

文章列表页 >

碳纳米管/环氧树脂复合纤维棉宏量制备及其吸油性能

材料化学工程与纳米技术 | 更新时间：2025-12-10

- 碳纳米管/环氧树脂复合纤维棉宏量制备及其吸油性能
- Scale preparation of carbon nanotubes/epoxy resin cellucotton composite and its oil/water separation performance
- 化工学报 2015年第3期页码：1194-1200
- 作者机构：
  
  1. 青海大学机械工程学院,青海,西宁,810016
  2. 青海大学化工学院,青海,西宁,810016
  3. 清华大学材料学院新型陶瓷与精细工艺国家重点实验室,北京,100084
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20141432
  中图分类号： 647.3
- 网络首发：2015-03-05，
  
  纸质出版：2015-03-05
- 稿件说明：
移动端阅览
南辉, 王冲, 王刚, 等. 碳纳米管/环氧树脂复合纤维棉宏量制备及其吸油性能[J]. 化工学报, 2015,(3):1194-1200.

NAN Hui, WANG Chong, WANG Gang, et al. Scale preparation of carbon nanotubes/epoxy resin cellucotton composite and its oil/water separation performance[J]. CIESC Journal, 2015, (3): 1194-1200.
南辉, 王冲, 王刚, 等. 碳纳米管/环氧树脂复合纤维棉宏量制备及其吸油性能[J]. 化工学报, 2015,(3):1194-1200. DOI： 10.11949/j.issn.0438-1157.20141432.

NAN Hui, WANG Chong, WANG Gang, et al. Scale preparation of carbon nanotubes/epoxy resin cellucotton composite and its oil/water separation performance[J]. CIESC Journal, 2015, (3): 1194-1200. DOI： 10.11949/j.issn.0438-1157.20141432.

摘要

采用环氧树脂作为前驱体溶胶

利用负载有碳纳米管的铝板为接收基板

通过简单方便的静电纺丝协同拉拔技术

宏量制备了碳纳米管/环氧树脂复合纤维棉

并对这种复合纤维棉的吸油性能进行了探索。采用扫描电子显微镜(SEM)、热重分析仪(TGA)、压汞仪、拉曼光谱仪等设备系统分析了复合纤维棉的形貌、结构和组成。结果表明

复合纤维棉具有高的比表面积与孔隙率

碳纳米管均匀地分布在复合纤维棉中。复合纤维棉与水和植物油的接触角分别为114.1°与66.8°;与丙纶纤维相比较

复合纤维棉展现出更加优异的吸油能力

可吸附超过自身质量10倍的油类物质。

Abstract

Carbon nanotubes/epoxy resin (EP) cellucotton composite was prepared on a large scale using EP as the precursor sol

aluminum plates covered with carbon nanotubes as substrate

by a simple and convenient electrospinning and collaborative pulling technology. The morphology

structure and composition of the obtained samples were investigated with scanning electron microscopy

thermogravimetric analyzer

mercury injection test and Raman spectroscopy. Carbon nanotubes were partly wrapped and distributed evenly on the surface of the EP fibers

and the composite structures had high specific surface area and porosity. The contact angle of the carbon nanotube/EP composite structure was 114.1° for water

and 66.8° for vegetable oil. The as-made carbon nanotubes/EP composites showed superior adsorption capacity for vegetable oil

which was better than polypropylene fiber

and could adsorb more than 10 times of oil in terms of their own mass.

关键词

Keywords

references

浏览量

334

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

纳米修饰吸液芯超薄平板热管的传热特性

纳米孔隙空间内气体分子平均自由程变化规律

相变悬浮液射流冲击变形状多孔层覆盖壁面的热分析

机器学习辅助快速筛选高性能CO2吸附分子筛

合金催化剂在电化学合成氨中的应用研究