基于CCDM的流态化制冰的多相流动与传热特性

梁坤峰; 阮春蕾; 王林; 袁竹林

doi:10.11949/j.issn.0438-1157.20141338

您当前的位置：

首页 >

文章列表页 >

基于CCDM的流态化制冰的多相流动与传热特性

流体力学与传递现象 | 更新时间：2025-12-10

- 基于CCDM的流态化制冰的多相流动与传热特性
- Multiphase flow and heat transfer characteristics of fluidization ice-making based on combined continuum and discrete model
- 化工学报 2015年第4期页码：1272-1281
- 作者机构：
  
  1. 河南科技大学制冷与空调技术研究所,河南,洛阳,471003
  2. 东南大学能源与环境学院,江苏,南京,210096
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20141338
  中图分类号： B61+1
- 网络首发：2015-04-05，
  
  纸质出版：2015-04-05
- 稿件说明：
移动端阅览
梁坤峰, 阮春蕾, 王林, 等. 基于CCDM的流态化制冰的多相流动与传热特性[J]. 化工学报, 2015,(4):1272-1281.

LIANG Kunfeng, RUAN Chunlei, WANG Lin, et al. Multiphase flow and heat transfer characteristics of fluidization ice-making based on combined continuum and discrete model[J]. CIESC Journal, 2015, (4): 1272-1281.
梁坤峰, 阮春蕾, 王林, 等. 基于CCDM的流态化制冰的多相流动与传热特性[J]. 化工学报, 2015,(4):1272-1281. DOI： 10.11949/j.issn.0438-1157.20141338.

LIANG Kunfeng, RUAN Chunlei, WANG Lin, et al. Multiphase flow and heat transfer characteristics of fluidization ice-making based on combined continuum and discrete model[J]. CIESC Journal, 2015, (4): 1272-1281. DOI： 10.11949/j.issn.0438-1157.20141338.

摘要

流态化制冰是一种新型的直接接触式动态制冰方式

通过建立联合连续和离散模型的CCDM(combined continuum and discrete model)全耦合模型

采用一种非结构网格颗粒搜索法

计算了流态化制冰过程所涉及的颗粒-流体多相系统的流动和传热特性。结果表明:基于CCDM模型计算出的结果与实验数据有较好的一致性

模型的准确度高;冻结程度关键值的提出

简化了颗粒间碰撞模型的判断和颗粒相表面传热量的等效计算;颗粒间的碰撞、聚并对颗粒粒径的作用

会进一步影响颗粒的运动速度、停留时间以及轴向浓度分布的变化

难以忽略其对于流态化制冰过程的多相流动与换热特性的影响。

Abstract

A direct contact dynamic type of fluidization ice-making technique was proposed. Through building a two-way couple model of combined continuum and discrete model (CCDM) and using a unstructured grid search method

the flow and heat transfer characteristics of fluid-particle multiphase about the process of fluidization ice-making were calculated and discussed. The data calculated based on CCDM were in agreement with experimental data

and the model accuracy was validated. A definition of particle freezing degree was presented as a simplification criterion of choosing particles collision model and equivalent calculating particle surface heat transfer. The effect of particles collision and coalescence on particle size further changed the velocity

residence time and axial density distribution of particles

which could not be ignored in studying multiphase flow and heat transfer characteristics of fluidization ice-making process.

关键词

Keywords

references

浏览量

150

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于自驱射流装置的强化池沸腾换热研究

水平管内甲醇流动冷凝数值模拟研究

气固鼓泡床结构双流体传热模型及其模拟验证

不同冷凝段温度下液氮脉动热管可视化实验研究

颗粒外掠含不同掺混单元平板的流动换热特性