基于三维CT成像的乙烯环氧化固定床反应器结构重构与数值模拟研究

周继鹏; 贺来宾; 李应成; 李木金; 李丽媛; 何秀娟; 程振民

doi:10.11949/0438-1157.20260871

您当前的位置：

首页 >

文章列表页 >

基于三维CT成像的乙烯环氧化固定床反应器结构重构与数值模拟研究

流体力学与传递现象 | 更新时间：2026-08-03

- 基于三维CT成像的乙烯环氧化固定床反应器结构重构与数值模拟研究
- Three-dimensional geometric reconstruction and CFD simulation of an ethylene epoxidation packed-bed reactor based on X-ray computed tomography
- 化工学报 2026年
- 作者机构：
  
  1.化学工程与低碳技术全国重点实验室，华东理工大学，上海200237
  2.中石化（上海）石油化工研究院有限公司，上海201208
- 作者简介：
  
  周继鹏（1990—），男，博士研究生，zhoujp.sshy@sinopec.com
  李应成（1972—），男，博士，教授，liyc.sshy@sinopec.com；
  程振民（1967—），男，博士，教授，zmcheng@ecust.edu.cn
- 基金信息：
- DOI：10.11949/0438-1157.20260871
  中图分类号： TQ 021.4
- 收稿：2026-06-23，
  
  修回：2026-08-02，
  
  录用：2026-08-03，
- 稿件说明：
移动端阅览
周继鹏, 贺来宾, 李应成, 等. 基于三维CT成像的乙烯环氧化固定床反应器结构重构与数值模拟研究[J/OL]. 化工学报, 2026.

ZHOU Jipeng, HE Laibin, LI Yingcheng, et al. Three-dimensional geometric reconstruction and CFD simulation of an ethylene epoxidation packed-bed reactor based on X-ray computed tomography[J/OL]. CIESC Journal, 2026.
周继鹏, 贺来宾, 李应成, 等. 基于三维CT成像的乙烯环氧化固定床反应器结构重构与数值模拟研究[J/OL]. 化工学报, 2026. DOI： 10.11949/0438-1157.20260871.

ZHOU Jipeng, HE Laibin, LI Yingcheng, et al. Three-dimensional geometric reconstruction and CFD simulation of an ethylene epoxidation packed-bed reactor based on X-ray computed tomography[J/OL]. CIESC Journal, 2026. DOI： 10.11949/0438-1157.20260871.

摘要

本研究采用三维X射线CT成像技术对真实堆积四叶草催化剂颗粒群进行结构重构，并结合颗粒分辨CFD方法研究乙烯环氧化固定床反应器内流动、反应、传质与传热耦合过程。CT成像能够有效表征催化剂颗粒局部缺陷及复杂几何结构，基于重构结构计算得到四叶草催化剂颗粒床层水力学直径为0.89 mm。研究结果表明，流体绕过催化剂颗粒形成复杂局部流动结构，反应器内浓度梯度在固体-流体界面处存在明显变化。由于内扩散阻力作用，催化剂内部产生较大浓度梯度，而温度分布相对均匀。轴向流动增强对流传热，使反应器轴向温度梯度较小，而靠近壁面区域的径向温度梯度明显增大。本研究可为固定床反应器中真实催化剂颗粒群结构重构及多孔材料固体-孔隙双域多物理场耦合过程研究提供重要参考。

Abstract

In this study

three-dimensional X-ray computed tomography (CT) is employed to reconstruct the real packed bed of quadrilobe catalyst particles. Particle-resolved computational fluid dynamics (CFD) simulations are then conducted to investigate the coupled flow

reaction

mass transfer

and heat transfer processes in an ethylene epoxidation packed-bed reactor. CT imaging effectively captures local defects and complex geometrical features of the catalyst particles. Based on the reconstructed structure

the hydraulic diameter of the quadrilobe catalyst packed bed is determined to be 0.89 mm. The results show that the fluid bypasses catalyst particles

forming complex local flow structures. Pronounced concentration gradients of reactants and products develop near the solid–fluid interfaces. Due to intraparticle diffusion resistance

pronounced concentration gradients develop inside the catalyst particles

whereas the temperature distribution remains relatively uniform. Axial convection enhances convective heat transfer

leading to a relatively small axial temperature gradient in the reactor

while a more pronounced radial temperature gradient is observed near the reactor wall. This work provides important insights into the geometric reconstruction of realistic catalyst particle assemblies in packed-bed reactors and the coupled multiphysics transport processes in solid–pore dual-domain porous media.

关键词

Keywords

references

Flaischlen S , Turek T , Wehinger G D . Local structure effects on hydrodynamics in slender fixed bed reactors: Spheres and rings [J ] . Chemical Engineering Journal , 2023 , 475 : 146342 .

Behnam M , Dixon A G , Nijemeisland M , et al . Catalyst deactivation in 3D CFD resolved particle simulations of propane dehydrogenation [J ] . Industrial & Engineering Chemistry Research , 2010 , 49 ( 21 ): 10641 - 10650 .

Dixon A G , Boudreau J , Rocheleau A , et al . Flow, transport, and reaction interactions in shaped cylindrical particles for steam methane reforming [J ] . Industrial & Engineering Chemistry Research , 2012 , 51 ( 49 ): 15839 - 15854 .

Moghaddam E M , Foumeny E A , Stankiewicz A I , et al . Rigid body dynamics algorithm for modeling random packing structures of nonspherical and nonconvex pellets [J ] . Industrial & Engineering Chemistry Research , 2018 , 57 ( 44 ): 14988 - 15007 .

宋江 , 张亚新 . 小管径比固定床中圆柱颗粒床层内气体流动特性 [J ] . 化学反应工程与工艺 , 2018 , 34 ( 4 ): 317 - 324 .

Song J , Zhang Y X . Gas flow characteristics in a cylindrical particle bed in as small tube to particle diameter ratio fixed bed [J ] . Chemical Reaction Engineering and Technology , 2018 , 34 ( 4 ): 317 - 324 .

王凯莉 , 张亚新 . 基于CFD-DEM的柱形颗粒固定床反应器流场特性数值模拟 [J ] . 化学反应工程与工艺 , 2017 , 33 ( 5 ): 474 - 480 .

Wang K L , Zhang Y X . A coupled CFD-DEM numerical simulation of flow field characteristics in a randomly packed fixed bed with columnar-shaped particle [J ] . Chemical Reaction Engineering and Technology , 2017 , 33 ( 5 ): 474 - 480 .

Shi Y , Chen H , Chen W Y , et al . Effects of particle shape and packing style on ethylene oxidation reaction using particle-resolved CFD simulation [J ] . Particuology , 2023 , 82 : 87 - 97 .

Boccardo G , Del Plato L , Marchisio D , et al . Pore-scale simulation of fluid flow in packed-bed reactors via rigid-body simulations and CFD [C ] // Proceedings of the 10th International Conference on CFD in Oil & Gas , Metallurgical and process Industries SINTEF, Trondheim, Norway. 2014 .

Boccardo G , Augier F , Haroun Y , et al . Validation of a novel open-source work-flow for the simulation of packed-bed reactors [J ] . Chemical Engineering Journal , 2015 , 279 : 809 - 820 .

Giese M , Rottschäfer K , Vortmeyer D . Measured and modeled superficial flow profiles in packed beds with liquid flow [J ] . AIChE Journal , 1998 , 44 ( 2 ): 484 - 490 .

Guo Z X , Xin S Y , Du Du C , et al . Acetylene hydrogenation processes studied using CFD in a packed bed reactor [J ] . Chemical Engineering & Technology , 2024 , 47 ( 10 ): e202300436 .

George G R , Bockelmann M , Schmalhorst L , et al . Radial heat transport in a fixed-bed reactor made of metallic foam pellets: Experiment and particle-resolved computational fluid dynamics [J ] . International Journal of Heat and Mass Transfer , 2022 , 197 : 123376 .

李泓宇 , 刘祥坤 , 施尧 , 等 . 颗粒分辨的乙炔选择性加氢固定床反应器数值模拟 [J ] . 化工学报 , 2024 , 75 ( 10 ): 3610 - 3622 .

Li H Y , Liu X K , Shi Y , et al . Numerical simulation of particle-resolved fixed-bed reactor for selective acetylene hydrogenation process [J ] . CIESC Journal , 2024 , 75 ( 10 ): 3610 - 3622 .

翁俊旗 , 刘鑫磊 , 余佳豪 , 等 . 蜂窝状催化剂中空结构对固定床反应器压降的影响 [J ] . 化工学报 , 2022 , 73 ( 1 ): 266 - 274 .

Weng J Q , Liu X L , Yu J H , et al . Influence of hollow structure of honeycomb catalysts on the pressure drop in packed bed reactors [J ] . CIESC Journal , 2022 , 73 ( 1 ): 266 - 274 .

贺逸健 , 刘祥坤 , 施尧 , 等 . 乙烷氧化脱氢制乙烯催化剂颗粒外形设计 [J ] . 化工进展 , 2025 , 44 ( 6 ): 3497 - 3508 .

He Y J , Liu X K , Shi Y , et al . Catalyst particle shape design for ethane oxidative dehydrogenation to ethylene [J ] . Chemical Industry and Engineering Progress , 2025 , 44 ( 6 ): 3497 - 3508 .

解勤勤 , 翁俊旗 , 林振利 , 等 . 固定床反应器中甲醇制芳烃工业催化剂结构影响的研究 [J ] . 化工学报 , 2025 , 76 ( 9 ): 4487 - 4498 .

Xie Q Q , Weng J Q , Lin Z L , et al . Effects of industrial catalyst structure on methanol to aromatics in a packed bed reactor [J ] . CIESC Journal , 2025 , 76 ( 9 ): 4487 - 4498 .

Wang Z P , Kang C L , Hao J , et al . Simulating gas-solid phase isomerization of C8 aromatics affected by catalyst shapes in fixed bed reactors with particle-resolved CFD approach [J ] . Chemical Engineering Science , 2024 , 295 : 120181 .

Kutscherauer M , Wehinger G D . Particle-resolved CFD simulation of diluted catalytic fixed bed reactors for formaldehyde production [J ] . ACS Engineering Au , 2025 , 5 ( 3 ): 284 - 297 .

Tan B R , Jiang Z C , Liao H W , et al . Hydrodynamic and mass transfer characteristics of ceramic foam packing in liquid–liquid extraction [J ] . Chemical Engineering Science , 2026 , 328 : 123763 .

双舒炎 , 张伟 , 王家乐 , 等 . 基于多孔镍电极的液相放电等离子体分解甲醇制氢实验研究 [J ] . 化工学报 , 2025 , 76 ( 11 ): 5753 - 5763 .

Shuang S Y , Zhang W , Wang J L , et al . Experimental study on hydrogen production from methanol decomposition by liquid-phase discharge using porous nickel electrodes [J ] . CIESC Journal , 2025 , 76 ( 11 ): 5753 - 5763 .

周明熙 , 周昊 , 马鹏楠 , 等 . 基于CT显微图像的烧结矿孔隙特征分析及有效热导率预测 [J ] . 化工学报 , 2018 , 69 ( 2 ): 633 - 641 .

Zhou M X , Zhou H , Ma P N , et al . Characterization of pore structure and effective thermal conductivity of iron ore sinter using micro CT images [J ] . CIESC Journal , 2018 , 69 ( 2 ): 633 - 641 .

Gabbett C , Doolan L , Synnatschke K , et al . Quantitative analysis of printed nanostructured networks using high-resolution 3D FIB-SEM nanotomography [J ] . Nature Communications , 2024 , 15 : 278 .

Zhai T Y , Zhao Z , Zhou X P . A review of 3D reconstruction methods for complex microstructures of porous media: imaging devices, techniques and applications [J ] . Rock Mechanics and Rock Engineering , 2025 , 58 ( 7 ): 7879 - 7922 .

Ming Y , Liang Q Q , Chen X D . Insights on the microstructure and physical properties of coral aggregates at the pore scale: from experiments to numerical simulations [J ] . Construction and Building Materials , 2024 , 451 : 138711 .

Wang H J , Li Y H , Huang L , et al . A pore-scale study on microstructure and permeability evolution of hydrate-bearing sediment during dissociation by depressurization [J ] . Fuel , 2024 , 358 : 130124 .

Ansah E O , Black J R , Haese R R . Impact of mineral dissolution-precipitation on pore geometry during copper sulphide heap leaching [J ] . Minerals Engineering , 2025 , 230 : 109379 .

Romijn N , Eghbalmanesh A , Hoogendoorn M W , et al . Hydrodynamics in a randomly packed bed of cylindrical particles: a comparison between PR-CFD simulations and MRI experiments [J ] . Chemical Engineering Science , 2024 , 299 : 120429 .

Elgersma S V , Sederman A J , Mantle M D , et al . Magnetic resonance velocity imaging of turbulent gas flow in a packed bed of catalyst support pellets [J ] . Chemical Engineering Journal , 2023 , 475 : 145445 .

黄笑乐 , 杨甫 , 韩磊 , 等 . 富油煤(长焰煤)孔隙结构三维表征及渗流模拟 [J ] . 化工学报 , 2022 , 73 ( 11 ): 5078 - 5087 .

Huang X L , Yang F , Han L , et al . 3D characterization of pore structure and seepage simulation of tar-rich coal(long flame coal) [J ] . CIESC Journal , 2022 , 73 ( 11 ): 5078 - 5087 .

Li G , Qin Y , Yao H P , et al . 3D pore structure characterization and permeability anisotropy visualization simulation of fusain [J ] . Energy , 2024 , 291 : 130422 .

高崇 , 潘银珍 , 朱炳辰 . 环柱状催化剂内强放热复合反应-传质-传热耦合过程研究(Ⅱ)本征反应动力学及反应-传质-传热耦合过程数学模型 [J ] . 化工学报 , 1998 , 49 ( 5 ): 610 - 616 .

Gao C , Pan Y Z , Zhu B C . Study on coupling process of multiple reactions-mass transfer-heat transfer in hollow cylindrical catalysts with strong heat effect(Ⅱ)intrinsic kinetics and mathematical model of coupling process of reaction-mass transfer-heat transfer [J ] . CIESC Journal , 1998 , 49 ( 5 ): 610 - 616 .

Fogler H S . Essentials of Chemical Reaction Engineering [M ] . 2nd ed . New York : Pearson Education , 2010 .

高崇 , 朱英 , 李树森 , 等 . 环柱状催化剂内强放热复合反应-传质-传热耦合过程研究(Ⅰ)催化剂曲折因子、有效导热系数的测定 [J ] . 化工学报 , 1998 , 49 ( 5 ): 601 - 609 .

Gao C , Zhu Y , Li S S , et al . Study on coupling process of multiple reactions-mass transfer-heat transfer in hollow cylindrical catalysts with strong heat effect(Ⅰ)experimental measurement of tortuosity factors and effective thermal conductivity of catalyst pellets [J ] . CIESC Journal , 1998 , 49 ( 5 ): 601 - 609 .

Ambekar A S , Schwarzmeier C , Rüde U , et al . Particle-resolved turbulent flow in a packed bed: RANS, LES, and DNS simulations [J ] . AIChE Journal , 2023 , 69 ( 1 ): e17615 .

Kolaczkowski S T , Chao R , Awdry S , et al . Application of a CFD code (FLUENT) to formulate models of catalytic gas phase reactions in porous catalyst pellets [J ] . Chemical Engineering Research and Design , 2007 , 85 ( 11 ): 1539 - 1552 .

Hawken M B , Reid S , Clarke D A , et al . Characterization of pressure drop through Schwarz-Diamond triply periodic minimal surface porous media [J ] . Chemical Engineering Science , 2023 , 280 : 119039 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

丙烷脱氢径向移动床中的两相流动与反应性能

气固流化床中颗粒团聚物的静态特征和湮灭规律研究

卷式反渗透膜进水流道内的CaSO4污垢特性研究

中试规模环形折流板脉冲萃取柱内液-液两相流数值模拟研究

单相浸没冷却液及液冷系统的流动换热特性研究