复杂流道结构料仓的下料流率预测——(华东理工大学上海煤气化工程技术研究中心，上海 200237)

孙栋; 陆海峰; 曹嘉琨; 吴雨婷; 郭晓镭; 龚欣

doi:10.11949/0438-1157.20190867

您当前的位置：

首页 >

文章列表页 >

复杂流道结构料仓的下料流率预测——(华东理工大学上海煤气化工程技术研究中心，上海 200237)

流体力学与传递现象 | 更新时间：2020-06-24

- 复杂流道结构料仓的下料流率预测——(华东理工大学上海煤气化工程技术研究中心，上海 200237)
- Solid flow rate prediction in hoppers with complicated flow channels
- 化工学报 2020年71卷第3期页码：974-982
- 作者机构：
  
  华东理工大学上海煤气化工程技术研究中心，上海 200237
- 作者简介：
  
  龚欣（1959—），女，教授，gongxin@ecust.edu.cn
- 基金信息：
  
  国家重点研发计划项目(2018YFC0808500);国家自然科学基金项目(51876066);上海煤气化工程技术研究中心项目(18DZ2283900);中央高校基本科研业务费专项资金(222201817018)
- DOI：10.11949/0438-1157.20190867
  中图分类号： TQ 536
- 收稿：2019-07-31，
  
  修回：2019-10-10，
  
  纸质出版：2020-03-05
- 稿件说明：
移动端阅览
孙栋, 陆海峰, 曹嘉琨, 吴雨婷, 郭晓镭, 龚欣. 复杂流道结构料仓的下料流率预测[J]. 化工学报, 2020, 71(3): 974-982

SUN Dong, LU Haifeng, CAO Jiakun, WU Yuting, GUO Xiaolei, GONG Xin. Solid flow rate prediction in hoppers with complicated flow channels[J]. CIESC Journal, 2020, 71(3): 974-982
孙栋, 陆海峰, 曹嘉琨, 吴雨婷, 郭晓镭, 龚欣. 复杂流道结构料仓的下料流率预测[J]. 化工学报, 2020, 71(3): 974-982 DOI： 10.11949/0438-1157.20190867.

SUN Dong, LU Haifeng, CAO Jiakun, WU Yuting, GUO Xiaolei, GONG Xin. Solid flow rate prediction in hoppers with complicated flow channels[J]. CIESC Journal, 2020, 71(3): 974-982 DOI： 10.11949/0438-1157.20190867.

摘要

在实验室搭建的有机玻璃料仓下料平台上，分别以自由流动粉体玻璃微珠和黏附性粉体煤粉和聚氯乙烯为实验介质，针对无改流体(No-In)、封闭改流体(Con-In)和开放改流体(Ucon-In)三种情况所形成的不同流道结构，开展了粉体料仓下料及其流率建模研究，定量分析了改流体对粉体下料流率的促进作用，对比给出了玻璃微珠、煤粉和聚氯乙烯在不同流道结构料仓内的下料特性。研究表明，改流体的引入有利于提高料仓下料流率，Con-In促进流动效果最明显，对于流动性弱的煤粉，下料流率提升幅度达到最大的58%。基于剪切摩擦区的概念，提出流率校正因子

对最小能量理论方程进行了修正，将理想的料仓下料模型拓展至实际下料过程。进一步，对于Con-In，根据流道结构特征结合对粉体的受力分析，修正了模型中的锥角项；对于Ucon-In，基于粉体下料流动竞争机制，提出分阶段下料模式并关联了内层和夹层的下料流率，最终建立了复杂流道结构料仓的下料流率预测模型。该模型综合考虑了粉体物性、下料流型和流道结构的影响，可有效预测自由流动粉体和黏附性粉体流经传统料仓(No-In)和改流体料仓(包括Con-In和Ucon-In)的粉体下料流率，且预测偏差

10%。

Abstract

By means of perspex hopper platform built in the laboratory

the flow behaviors of powders were investigated under the action of various flow channel structures in hoppers without insert (No-In)

with confined insert (Con-In) and with unconfined insert (Ucon-In). Discharge experiments of free-flowing glass beads and adhesive pulverized coal and polyvinyl chloride were carried out and a model was established to predict the solid flow rate. The effects of inserts contributing to increasing the flow rate were analyzed quantitatively and the flow characteristics of glass beads

pulverized coal and polyvinyl chloride were compared considering distinct flow channel structures. The research shows that the introduction of the modified fluid is beneficial to increase the flow rate of the silo. Con-In promotes the most obvious flow effect. For the weak coal powder

the flow rate of the lower flow rate reaches the maximum of 58%. Based on the evolution of shear flow zone

a correction factor

was proposed to modify the minimum energy theory equation

and the model for ideal hoppers was extended to take effect under actual situations. Furthermore

regarding Con-In

according to the structural characteristics of the flow channels and the force analysis on powders

the term relating to conical angle in the model was modified. In terms of Ucon-In

based on the competition mechanism

a specific flow sequence during discharge was proposed and the relationship between flow rate of inner layer and that of interlayer was obtained. Finally

a model to predict the solid flow rate in hopper with complicated flow channel structures was established. The model took into account the effects of powder properties

flow patterns and structural parameters

which can effectively predict the discharge rate of free-flowing and adhesive powders flowing through traditional hoppers (No-In) and hoppers with insert (including Con-In and Ucon-In) with the deviation less than 10%.

关键词

Keywords

references

Lu H , Guo X , Jin Y , et al . Powder discharge from a hopper-standpipe system modelled with CPFD [J]. Advanced Powder Technology , 2017 , 28 ( 2 ): 481 - 490 .

Lu H , Guo X , Gong X , et al . Experimental study on aerated discharge of pulverized coal [J]. Chemical Engineering Science , 2012 , 71 ( 13 ): 438 - 448 .

Liu P , Lamarche C Q , Kellogg K M , et al . Cohesive grains: bridging micro-level measurements to macro-level flow behavior via surface roughness [J]. AIChE Journal , 2016 , 62 ( 10 ): 3529 - 3537 .

Lu H , Zhong J , Cao G P , et al . Gravitational discharge of fine dry powders with asperities from a conical hopper [J]. AIChE Journal , 2018 , 64 ( 2 ): 427 - 436 .

Zhao Y , Yang S , Zhang L , et al . DEM study on the discharge characteristics of lognormal particle size distributions from a conical hopper [J]. AIChE Journal , 2018 , 64 ( 4 ): 1174 - 1190 .

Freyssingeas E , Dalbe M J , Géminard J C . Flowers in flour: avalanches in cohesive granular matter [J]. Physical Review E , 2011 , 83 ( 5 ): 051307 .

Jaeger H M , Nagel S R , Behringer R P . Granular solids, liquids, and gases [J]. Reviews of Modern Physics , 1996 , 68 ( 4 ): 1259 - 1273 .

孙其诚 , 王光谦 . 静态堆积颗粒中的力链分布 [J]. 物理学报 , 2008 , 57 ( 8 ): 4667 - 4674 .

Sun Q C , Wang G Q . Force distribution in static granular matter in two dimensions [J]. Acta Physica Sinica , 2008 , 57 ( 8 ): 4667 - 4674 .

Campbell C S . Granular material flows – an overview [J]. Powder Technology , 2006 , 162 ( 3 ): 208 - 229 .

Zheng Q J , Xia B S , Pan R H , et al . Prediction of mass discharge rate in conical hoppers using elastoplastic model [J]. Powder Technology , 2017 , 307 : 63 - 72 .

Zhu H , Zhou Z , Yang R , et al . Discrete particle simulation of particulate systems: a review of major applications and findings [J]. Chemical Engineering Science , 2008 , 63 ( 23 ): 5728 - 5770 .

Zhao Y , Cocco R A , Yang S , et al . DEM study on the effect of particle-size distribution on jamming in a 3D conical hopper [J]. AIChE Journal , 2019 , 65 ( 2 ): 512 - 519 .

陆海峰 , 郭晓镭 , 陶顺龙 , 等 . 不同载气供料对煤粉料仓下料的影响 [J]. 化工学报 , 2014 , 65 ( 9 ): 3383 - 3388 .

Lu H F , Guo X L , Tao S L , et al . Effect of feeding gas on hopper discharge of pulverized coal [J]. CIESC Journal , 2014 , 65 ( 9 ): 3383 - 3388 .

Jasion G T , Shrimpton J S , Li Z , et al . On the bridging mechanism in vibration controlled dispensing of pharmaceutical powders from a micro hopper [J]. Powder Technology , 2013 , 249 : 24 - 37 .

Zhang C , Qiu C , Pu C , et al . The mechanism of vibrations-aided gravitational flow with overhanging style in hopper [J]. Powder Technology , 2018 , 327 : 291 - 302 .

Yang S C , Hsiau S S . The simulation and experimental study of granular materials discharged from a silo with the placement of inserts [J]. Powder Technology , 2001 , 120 ( 3 ): 244 - 255 .

Zhang Q , Hao B , Britton M G . Flow patterns of cohesive feed in a model bin with flow-corrective inserts [J]. Canadian Biosystems Engineering , 2002 , 44 ( 2 ): 5 .1-5. 6 .

Lu H , Guo X , Gong X , et al . Prediction of solid discharge rates of pulverized coal from an aerated hopper [J]. Powder Technology , 2015 , 286 : 645 - 653 .

Matchett A J . A theoretical model of vibrationally induced flow in conical hopper systems [J]. Chemical Engineering Research and Design , 2004 , 82 ( 1 ): 85 - 98 .

Härtl J . A study of granular solids in silos with and without an insert [D]. Edinburgh : The University of Edinburgh , 2008 .

Wójcik M , Tejchman J , Enstad G G . Confined granular flow in silos with inserts — full-scale experiments [J]. Powder Technology , 2012 , 222 : 15 - 36 .

Beverloo W A , Leniger H A , Velde J V D . The flow of granular solids through orifices [J]. Chemical Engineering Science , 1961 , 15 ( 3 ): 260 - 269 .

Tierrie J , Baaj H , Darmedru P . Modeling the relationship between the shape and flowing characteristics of processed sands [J]. Construction and Building Materials , 2016 , 104 : 235 - 246 .

Khashayar S , Shahab G , Reza Z . A review on gravity flow of free-flowing granular solids in silos - basics and practical aspects [J]. Chemical Engineering Science , 2018 , 192 : 1011 - 1035 .

Rose H F , Tanaka T . Rate of discharge of granular materials from bins and hoppers [J]. The Engineer , 1959 , 208 : 465 - 469 .

Carleton A J . The effect of fluid-drag forces on the discharge of free-flowing solids from hoppers [J]. Powder Technology , 1972 , 6 ( 2 ): 91 - 96 .

Brown R L , Richards J C . Profiles of flow of granules through apertures [J]. Transactions of the Institute of Chemical Engineers , 1960 , 38 : 243 - 256 .

Verghese T M , Nedderman R M . The discharge of fine sands from conical hoppers [J]. Chemical Engineering Science , 1995 , 50 ( 50 ): 3143 - 3153 .

Gentzler M , Tardos G I . Measurement of velocity and density profiles in discharging conical hoppers by NMR imaging [J]. Chemical Engineering Science , 2009 , 64 ( 22 ): 4463 - 4469 .

Liu Y , Guo X L , Lu H F , et al . An investigation of the effect of particle size on the flow behavior of pulverized coal [J]. Powder Technology , 2015 , 102 : 698 - 713 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

带有突扩比的新型流道结构对海水激活电池性能的影响

气相沉积硅碳中硅结晶度对电化学性能的影响

多目标优化驱动的PEM电解槽性能研究

涡流空气分级流场中团聚体破碎规律研究

改性沸石抑制乙烯爆炸性能及机理研究