基于数值模拟的马蹄焰玻璃窑蓄热室热效率研究

杨海东; 陈强; 徐康康; 朱成就

doi:10.11949/0438-1157.20190422

您当前的位置：

首页 >

文章列表页 >

基于数值模拟的马蹄焰玻璃窑蓄热室热效率研究

流体力学与传递现象 | 更新时间：2026-07-24

- 基于数值模拟的马蹄焰玻璃窑蓄热室热效率研究
- Thermal efficiency research of regenerator for horseshoe flame glass furnace based on numerical simulation
- 化工学报 2019年70卷第12期页码：4608-4616
- 作者机构：
  
  广东工业大学机电工程学院，广东广州 510006
- 作者简介：
  
  杨海东（1973—），男，博士，教授，yanghd@gdut.edu.cn
  陈强（1993—），男，硕士研究生，291999104@qq.com
- 基金信息：
  
  NSFC-广东联合基金重点项目(U1501248);国家自然科学基金项目(51905109)
- DOI：10.11949/0438-1157.20190422
  中图分类号： TQ 173
- 收稿：2019-04-23，
  
  修回：2019-09-18，
  
  网络首发：2020-06-09，
  
  纸质出版：2019-12-05
- 稿件说明：
移动端阅览
杨海东, 陈强, 徐康康, 朱成就. 基于数值模拟的马蹄焰玻璃窑蓄热室热效率研究[J]. 化工学报, 2019, 70(12): 4608-4616

YANG Haidong, CHEN Qiang, XU Kangkang, ZHU Chengjiu. Thermal efficiency research of regenerator for horseshoe flame glass furnace based on numerical simulation[J]. CIESC Journal, 2019, 70(12): 4608-4616
杨海东, 陈强, 徐康康, 朱成就. 基于数值模拟的马蹄焰玻璃窑蓄热室热效率研究[J]. 化工学报, 2019, 70(12): 4608-4616 DOI： 10.11949/0438-1157.20190422.

YANG Haidong, CHEN Qiang, XU Kangkang, ZHU Chengjiu. Thermal efficiency research of regenerator for horseshoe flame glass furnace based on numerical simulation[J]. CIESC Journal, 2019, 70(12): 4608-4616 DOI： 10.11949/0438-1157.20190422.

摘要

蓄热室是马蹄焰玻璃窑余热回收、能源循环再利用的重要设备，它对于降低玻璃窑炉整体能耗有着重要的作用。热效率低的蓄热室不但会造成大量的能源浪费，还可能会减少玻璃窑炉的使用寿命，提高蓄热室的热效率已经成为了玻璃产业亟待解决的问题。为了研究蓄热室参数对热效率的影响规律，首先运用计算流体力学理论和多孔介质模型建立了蓄热室的数值仿真模型，然后结合热平衡分析和气体热力学性质变化规律，建立蓄热室热效率模型，最后运用Fluent对不同参数下蓄热室内部温度场与速度场进行仿真，同时从温度场中采集热效率计算数据并分析各参数对蓄热室热效率的影响规律。结果表明：在保证燃料燃烧充分的前提下，减小助燃空气进口速度、格子体孔隙率、格子砖当量直径有利于增大空气与格子体的传热量，提高蓄热室的热效率，而烟道口进口面积在0.9～1 m

时蓄热室的热效率较高。

Abstract

The regenerator is an important equipment for waste heat recovery and energy recycling of the horseshoe flame glass furnace

which

plays an important role in reducing the overall energy consumption of the glass furnace. The regenerator with low thermal efficiency not merely causes an ample amount of energy waste

but also may diminish the lifetime of the glass furnace. Enhancing the thermal efficiency of the regenerator has become a pressing problem to be solved in the glass industry. With the purpose of studying the influence of various parameters of regenerator on thermal efficiency

a numerical simulation model of regenerator is established by using computational fluid dynamics theory and porous media model. Subsequently

combined lance analysis and variation law of gas thermodynamic properties

a thermal efficiency model of the regenerator is established. Finally

Fluent is used to simulate the temperature field and velocity field inside the regenerative chamber with different parameters. Simultaneously

the thermal efficiency data for calculation is collected from the temperature field and the influence of each parameter on the thermal efficiency of the regenerator is analyzed. The results prove that under the premise of ensuring sufficient fuel combustion

reducing the combustion air inlet speed

checkers porosity and refractory brick equivalent diameter are beneficial to augmenting the heat transfer capacity of air and brick

as well as improving the thermal efficiency of the regenerator. Nevertheless

at inlet area of 0.9—1 m

the thermal efficiency of the regenerative chamber is higher.

关键词

Keywords

references

李骏 . 马蹄焰玻璃窑能耗建模与局部能耗标杆研究 [D ] . 广州 : 广东工业大学 , 2018 .

Li J . Research on energy consumption modeling and local energy consumption benchmarking of horseshoe flame glass furnace [D ] . Guangzhou : Guangdong University of Technology , 2018 .

姜梦一 . 基于改进粒子群算法的马蹄焰玻璃窑能效优化方法研究 [D ] . 广州 : 广东工业大学 , 2018 .

Jiang M Y . Energy efficiency optimization of horseshoe flame glass kiln based on improved particle swarm optimization algorithm [D ] . Guangzhou : Guangdong University of Technology , 2018 .

Sardeshpande V , Gaitonde U N , Banerjee R . Model based energy benchmarking for glass furnace [J ] . Energy Conversion and Management , 2007 , 48 ( 10 ): 2718 - 2738 .

Ponsich A , Azzaro-Pantel C , Domenech S , et al . A systemic approach for glass manufacturing process modeling [J ] . Chemical Engineering and Processing: Process Intensification , 2009 , 48 ( 8 ): 1310 - 1320 .

刘颖 , 刘义平 , 陶曙明 , 等 . 填充球蓄热室内传热与流动过程数值模拟及结构优化 [J ] . 中南大学学报(自然科学版) , 2015 , 46 ( 6 ): 1981 - 1988 .

Liu Y , Liu Y P , Tao S M , et al . Structural optimization and numerical simulation of heat transfer and gas flow of ball-packed bed regenerative chamber [J ] . Journal of Central South University (Science and Technology) , 2015 , 46 ( 6 ): 1981 - 1988 .

李阳 , 陈杰 . 全氧燃烧玻璃熔池玻璃液的数值模拟 [J ] . 硅酸盐通报 , 2014 , 33 ( 11 ): 3050 - 3053 .

Li Y , Chen J . Numerical simulation of oxy-fuel glass tanky glass flow [J ] . Bulletin of the Chinese Ceramic Society , 2014 , 33 ( 11 ): 3050 - 3053 .

Skiepko T , Shah R K . Modeling and effect of leakages on heat transfer performance of fixed matrix regenerators [J ] . International Journal of Heat and Mass Transfer , 2005 , 48 ( 8 ): 1608 - 1632 .

Fedorov A G , Pilon L . Glass foams: formation, transport properties, and heat, mass, and radiation transfer [J ] . Journal of Non-Crystalline Solids , 2002 , 311 ( 2 ): 154 - 173 .

王杰曾 , 刘锡俊 . 玻璃窑用耐火材料的发展方向 [J ] . 耐火材料 , 2017 , 51 ( 2 ): 81 - 86 .

Wang J Z , Liu X J . Development direction of refractories for glass furnace [J ] . Refractories , 2017 , 51 ( 2 ): 81 - 86 .

沈锦林 , 张勇 , 宋晨路 . 玻璃熔窑筒型砖蓄热室三维数值模拟 [J ] . 材料科学与工程学报 , 2003 , 21 ( 4 ): 475 - 478 .

Shen J L , Zhang Y , Song C L . Three-dimensional numerical simulation of chimney checkers for glass furnace regenerator [J ] . Journal of Materials Science and Engineering , 2003 , 21 ( 4 ): 475 - 478 .

祁霞 , 戴方钦 . 蓄热小球填充床的气体阻力特性 [J ] . 过程工程学报 , 2015 , 15 ( 5 ): 770 - 773 .

Qi X , Dai F Q . Gas resistance characteristics of a heat storage packed ball bed [J ] . The Chinese Journal of Process Engineering , 2015 , 15 ( 5 ): 770 - 773 .

Sardeshpande V , Anthony R , Gaitonde U N , et al . Performance analysis for glass furnace regenerator [J ] . Applied Energy , 2011 , 88 ( 12 ): 4451 - 4458 .

El-Behery S M , Hussien A A , Kotb H , et al . Performance evaluation of industrial glass furnace regenerator [J ] . Energy , 2017 , 119 : 1119 - 1130 .

Wołkowycki G . Experimental results on the fixed matrix regenerator effectiveness for a glass stove furnace [J ] . Heat Transfer Engineering , 2016 , 37 ( 6 ): 591 - 602 .

吕树欣 , 刘涌 , 宋晨路 , 等 . 基于火焰空间与玻璃液热耦合的玻璃熔窑数值模拟 [J ] . 材料科学与工程学报 , 2012 , 30 ( 1 ): 25 - 30 .

Lyu S X , Liu Y , Song C L , et al . Computational study of glass furnace based on thermal coupling between combustion space and liquid glass pool [J ] . Journal of Materials Science and Engineering , 2012 , 30 ( 1 ): 25 - 30 .

Leyla R , Hamid N , Ehsan E B , et al . Thermal management of a distribution transformer: an optimization study of the cooling system using CFD and response surface methodology [J ] . International Journal of Electrical Power & Energy Systems , 2019 , 104 : 443 - 455 .

徐烨琨 , 刘成 , 李永辉 . 折流杆换热器的研究方法进展 [J ] . 化工进展 , 2014 , 33 ( 7 ): 1671 - 1676 .

Xu Y K , Liu C , Li Y H . Progress of rod baffle heat exchanger [J ] . Chemical Industry and Engineering Progress , 2014 , 33 ( 7 ): 1671 - 1676 .

胡万玲 , 王良璧 . 涡产生器翼高对管翅式换热器流动与传热的影响 [J ] . 化工学报 , 2017 , 68 ( S1 ): 169 - 177 .

Hu W L , Wang L B . Effect of height of winglet vortex generators on thermal hydrodynamic performance of tube bank fin heat exchanger [J ] . CIESC Journal , 2017 , 68 ( S1 ): 169 - 177 .

李剑锐 , 陈杰 , 浦晖 , 等 . 绕管式换热器壳侧降膜流动和相变传热的数值模拟 [J ] . 化工学报 , 2015 , 66 ( S2 ): 40 - 49 .

Li J R , Chen J , Pu H , et al . Simulation of falling film flow and heat transfer at shell-side of coil-wound heat exchanger [J ] . CIESC Journal , 2015 , 66 ( S2 ): 40 - 49 .

傅鑫亮 , 闫志勇 . 仿柳叶形静态混合器的流动及混合特性 [J ] . 化工学报 , 2017 , 68 ( 12 ): 4600 - 4606 .

Fu X L , Yan Z Y . Flow and mixing characteristics in willow leaf-like static mixer [J ] . CIESC Journal , 2017 , 68 ( 12 ): 4600 - 4606 .

Abbassi A , Khoshmanesh K . Numerical simulation and experimental analysis of an industrial glass melting furnace [J ] . Applied Thermal Engineering , 2008 , 28 ( 5 / 6 ): 450 - 459 .

Hrbek L , Kocourková P , Jebavá M , et al . Bubble removal and sand dissolution in an electrically heated glass melting channel with defined melt flow examined by mathematical modelling [J ] . Journal of Non-Crystalline Solids , 2017 , 456 : 101 - 113 .

蔡建祥 . 混合蓄热室的三维数值模拟 [D ] . 杭州 : 浙江大学 , 2002 .

Cai J X . Three dimensional numerical simulation of mixed regenerator [D ] . Hangzhou : Zhejiang University , 2002 .

Reboussin Y , Fourmigué J F , Marty P , et al . A numerical approach for the study of glass furnace regenerators [J ] . Applied Thermal Engineering , 2005 , 25 ( 14 / 15 ): 2299 - 2320 .

Basso D , Cravero C , Reverberi A , et al . CFD analysis of regenerative chambers for energy efficiency improvement in glass production plants [J ] . Energies , 2015 , 8 ( 8 ): 8945 - 8961 .

蒋朝辉 , 周刚 , 张海峰 , 等 . 顶燃式球式热风炉烧炉过程温度场建模 [J ] . 中南大学学报（自然科学版） , 2018 , 49 ( 9 ): 2216 - 2224 .

Jiang Z H , Zhou G , Zhang H F , et al . Temperature distribution model for combustion process of hot blast stove of dome combustion ball type [J ] . Journal of Central South University (Science and Technology) , 2018 , 49 ( 9 ): 2216 - 2224 .

Reverberi A P , Fabiano B , Dovì V G . Use of inverse modelling techniques for the estimation of heat transfer coefficients to fluids in cylindrical conduits [J ] . International Communications in Heat and Mass Transfer , 2013 , 42 : 25 - 31 .

Ergun S . Fluid flow through packed columns [J ] . Chemical Engineering Progress , 1952 , 48 : 89 - 94 .

Yu J , Zhang M , Fan W , et al . Study on performance of the ball packed-bed regenerator: experiments and simulation [J ] . Applied Thermal Engineering , 2002 , 22 ( 6 ): 641 - 651 .

Sayyaadi H , Aminian H R . Design and optimization of a non-TEMA type tubular recuperative heat exchanger used in a regenerative gas turbine cycle [J ] . Energy , 2010 , 35 ( 4 ): 1647 - 1657 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

泥水盾构仓体内射流对泥浆输送特性影响研究

海水激活电池电解液流动特性分析

旋转膜过滤器内部流动特性数值模拟

氯化钛白氧化反应器结疤问题分析及数值模拟

卧式单轴捏合反应器流动与混合特性的数值模拟