Preparation and corrosion resistance of silane-based composite film on surface of cold rolled steel
化工学报2010年第S1期
作者机构:
合肥工业大学化学工程学院, 可控化学与材料化工安徽省重点实验室
作者简介:
基金信息:
DOI:
中图分类号:
网络首发:2010-06-29,
纸质出版:2010-06-29
稿件说明:
移动端阅览
牛运峰. 冷轧钢表面硅烷复合膜的制备及耐蚀性能[J]. 化工学报, 2010,(S1).
牛运峰. Preparation and corrosion resistance of silane-based composite film on surface of cold rolled steel[J]. CIESC Journal, 2010, (S1).
牛运峰. 冷轧钢表面硅烷复合膜的制备及耐蚀性能[J]. 化工学报, 2010,(S1).DOI:
牛运峰. Preparation and corrosion resistance of silane-based composite film on surface of cold rolled steel[J]. CIESC Journal, 2010, (S1).DOI:
冷轧钢表面硅烷复合膜的制备及耐蚀性能
摘要
Abstract
The γ-glycidoxy-propyl tri-methoxy silane-based composite film with cerium and chromium ions was prepared on the surface of cold rolled steel(CRS) using the immersion technique in this paper.The corrosion resistance of the composite silane film was studied in 3.50% NaCl solution by electrochemistry method.The change in the shape of the composite silane film before and after corrosion testing was researched by employing the scanning electron microscope.The result indicates that the silane solution with cerium and chromium ions
which reacts at 50℃ with the pH value 4 for 8h
has the best hydrolyzation effect.Furthermore
the corrosion current density of the CRS with composite silane films decreases to 1.584×10-7 A·cm-2 in 3.50% NaCl solution,and a positive shift for the corrosion potential can be observed.Test result indicates that the shape of the composite silane film with cerium and chromium ions on the CRS remains nearly unchanged after corrosion
and the corrosion resistance is apparently superior to the CRS with pure silane film.