CHEN Yinfei, GE Zhonghua, LV Dewei. MgFe COMPLEX OXIDES FOR SO2 OXIDATIVE ADSORPTION[J]. CIESC Journal, 2001, (5).DOI:
不同制备方法对MgFe氧化物催化吸附SO2性能的影响
摘要
用不同的制备方式得到了 3种MgFe复合氧化物和混合物
即机械混合的Fe2O3 +MgO ;以MgO为载体
浸渍法制备的Fe2O3 /MgO ;以MgFe水滑石类为前驱体
经焙烧制得MgFeOx.分别测定了 3种材料对SO2 氧化吸附的速率和硫容量
发现MgFeOx 脱硫性能最好
硫容量达到 1.4gSO2/g吸附剂 .通过BET、XRD和IR的表征
分析了材料脱硫性能好的原因 .主要是高度分散状态的MgFeOx 中Mg和Fe的协同作用
Fe起到了催化氧化的作用
Mg是吸附中心
氧化和吸附的耦合加快了MgFeOx 对SO2 的吸附速率
增加了硫容量
Abstract
Three kinds of complex oxides and mixed oxide were prepared with different methods
MgO mixed simply with Fe2O3
Fe2O3 loaded on MgO with impregnation
and MgFeOx calcined on the MgFe hydrotalcite.The desulfuration rates and the sulfur capacities of the materials were measured. It was found that MgFeOx showed the best performance and its sulfur capacity exceeded 1.4 g SO2/g material. The reason for high rate and capacity was analyzed from BET data
XRD and IR spectra. The synergistic action of Mg and Fe dispersed uniformly in complex oxide
in which Fe was the oxidizing center and Mg was the adsorbing center
speeded up the desulfuration rate and increased the sulfur capacity.