环柱状催化剂内强放热复合反应──传质──传热耦合过程研究(Ⅰ)催化剂曲折因子、有效导热系数的测定

高崇; 朱英; 李树森; 潘银珍; 朱炳辰

您当前的位置：

首页 >

文章列表页 >

环柱状催化剂内强放热复合反应──传质──传热耦合过程研究(Ⅰ)催化剂曲折因子、有效导热系数的测定

化工学报 | 更新时间：2025-12-16

- 环柱状催化剂内强放热复合反应──传质──传热耦合过程研究(Ⅰ)催化剂曲折因子、有效导热系数的测定
- STUDY ON COUPLING PROCESS OF MULTIPLE REACTIONS-MASS TRANSFER-HEAT TRANSFER IN HOLLOW CYLINDRICAL CATALYSTS WITH STRONG HEAT EFFECT（Ⅰ）EXPERIMENTAL MEASUREMENT OF TORTUOSITY FACTORS AND EFFECTIVE THERMAL CONDUCTIVITY OF CATALYST PELLETS
- 化工学报 1998年第5期
- 作者机构：
  
  吉林化工学院化工系!华东理工大学化学工程系,上海200237,华东理工大学化学工程系!上海200237,华东理工大学化学工程系!上海200237,华东理工大学化学工程系!上海200237,华东理工大学化学工程系,上海,200237
- 作者简介：
- 基金信息：
- DOI：
  中图分类号： Q021
- 网络首发：1998-10-25，
  
  纸质出版：1998-10-25
- 稿件说明：
移动端阅览
高崇, 朱英, 李树森, 等. 环柱状催化剂内强放热复合反应──传质──传热耦合过程研究(Ⅰ)催化剂曲折因子、有效导热系数的测定[J]. 化工学报, 1998,(5).

Gao Chong, Zhu Ying, Li Shushen, et al. STUDY ON COUPLING PROCESS OF MULTIPLE REACTIONS-MASS TRANSFER-HEAT TRANSFER IN HOLLOW CYLINDRICAL CATALYSTS WITH STRONG HEAT EFFECT（Ⅰ）EXPERIMENTAL MEASUREMENT OF TORTUOSITY FACTORS AND EFFECTIVE THERMAL CONDUCTIVITY OF CATALYST PELLETS[J]. CIESC Journal, 1998, (5).
高崇, 朱英, 李树森, 等. 环柱状催化剂内强放热复合反应──传质──传热耦合过程研究(Ⅰ)催化剂曲折因子、有效导热系数的测定[J]. 化工学报, 1998,(5). DOI：

Gao Chong, Zhu Ying, Li Shushen, et al. STUDY ON COUPLING PROCESS OF MULTIPLE REACTIONS-MASS TRANSFER-HEAT TRANSFER IN HOLLOW CYLINDRICAL CATALYSTS WITH STRONG HEAT EFFECT（Ⅰ）EXPERIMENTAL MEASUREMENT OF TORTUOSITY FACTORS AND EFFECTIVE THERMAL CONDUCTIVITY OF CATALYST PELLETS[J]. CIESC Journal, 1998, (5). DOI：

摘要

采用经典定态法和改进的单颗粒线反应器法（SPSRM)测定了环柱状环氧乙烷银催化剂的曲折因子，两种方法测定结果十分吻合。提出一种测定固体催化剂颗粒有效导热系数的新方法。该方法简单、方便且不改变催化剂原有的形状及物理结构，可以在催化剂允许使用的任何温度下进行测定，准确度较高。用本方法测定了环氧乙烷合成银催化剂颗粒的有效导热系数，并用于催化剂内部浓度、温度、选择性计算，计算与实验结果吻合良好。

Abstract

The tortuosity factors of the silver catalyst for ethylene oxide formation with hollow cylindrical shape were measured by classical steady state and dynamic state method (SPSRM).The experimental results of the two methods were almost the same.A new calculation method and an on- line analysis technique with computer were used in SPSRM.These improvements can make the SPSRM experiments more convenient

simple and reliable.A new method for measuring effective thermal conductivity of solid catalyst was developed.The method is simple

convenient and accurate and can be used to plate

cylinder and other shape solid catalysts without changing the shape and physical structure at any reaction temperature.The effective thermal conductivities of ethylene oxide synthesis catalyst with hollow cylindrical shape were measured with this method.Experimental results were used to calculate the distribution of components

temperature and selectivity within the silver catalyst.The calculation results agreed well with experimental data of global kinetics.

关键词

Keywords

references

浏览量

199

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

复合金属CuCr2O4表面CNCl水解反应机理

原位水热法可控合成Bi2MoO6/MoO3复合纤维及其高效光催化产氢性能

基于机器学习的改型歧管式微通道热沉流动传热特性多目标优化

低截面气速下气液旋流分离器性能研究

温和条件下太阳能光热催化氨合成与分解的研究进展