煅烧升温速率对于钙基吸收剂脱碳性能的影响

罗健; 禚玉群; 冯武军; 陈昌和; 徐旭常

您当前的位置：

首页 >

文章列表页 >

煅烧升温速率对于钙基吸收剂脱碳性能的影响

能源和环境工程 | 更新时间：2025-12-10

- 煅烧升温速率对于钙基吸收剂脱碳性能的影响
- Effect of heating-rate on Ca-based absorbent performance of CO₂ capture
- 化工学报 2009年第8期页码：2089-2094
- 作者机构：
  
  清华大学热能工程系，热科学与动力工程教育部重点实验室,北京,100084
- 作者简介：
- 基金信息：
- DOI：
  中图分类号：
- 网络首发：2009-08-05，
  
  纸质出版：2009-08-05
- 稿件说明：
移动端阅览
罗健, 禚玉群, 冯武军, 等. 煅烧升温速率对于钙基吸收剂脱碳性能的影响[J]. 化工学报, 2009,(8):2089-2094.

LUO Jian, ZHUO Yuqun, FENG Wujun, et al. Effect of heating-rate on Ca-based absorbent performance of CO₂ capture[J]. CIESC Journal, 2009, (8): 2089-2094.
罗健, 禚玉群, 冯武军, 等. 煅烧升温速率对于钙基吸收剂脱碳性能的影响[J]. 化工学报, 2009,(8):2089-2094. DOI：

LUO Jian, ZHUO Yuqun, FENG Wujun, et al. Effect of heating-rate on Ca-based absorbent performance of CO₂ capture[J]. CIESC Journal, 2009, (8): 2089-2094. DOI：

摘要

Abstract

A wire-mesh reactor capable of heating samples at a given heating-rate (1—1000 K8226;s-1) was used to investigate the effect of heating-rate on Ca-based absorbent performance of CO2 capture.BET method was used to analyze the morphology of the produced CaO

and the capabilities of the absorbent were compared.It was found that CaO calcined at a higher heating-rate had more appropriate pore distribution for CO2 capture

and the capability of CaO calcined at 1000 K8226;s-1 was 15% higher than that calcined at 1 K8226;s-1 determined by TGA.

关键词

Keywords

references

浏览量

964

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

硫基光催化剂在高效光催化制氢中研究进展

富氧空位锌掺杂PdO/ZrO2催化CO2和苯酚合成碳酸二苯酯

咪唑类离子液体过冷行为的机制与调控

液氢贮箱在轨排气的闪蒸特性与热力态调节规律研究

低截面气速下气液旋流分离器性能研究