Fe(Ⅲ)和Al(Ⅲ)复合掺杂非晶态Ni(OH)<sub>2</sub>的电极材料及性能

刘长久; 齐美荣; 吴华斌; 秦明珠

您当前的位置：

首页 >

文章列表页 >

Fe(Ⅲ)和Al(Ⅲ)复合掺杂非晶态Ni(OH)₂的电极材料及性能

材料化学工程与纳米技术 | 更新时间：2025-12-10

- Fe(Ⅲ)和Al(Ⅲ)复合掺杂非晶态Ni(OH)₂的电极材料及性能
- Electrode material and performance of amorphous Ni(OH)₂ codoped by Fe(Ⅲ) and Al(Ⅲ)
- 化工学报 2009年第3期页码：788-794
- 作者机构：
  
  桂林工学院材料与化学工程系，有色金属及材料加工新技术教育部重点实验室
- 作者简介：
- 基金信息：
- DOI：
  中图分类号：
- 网络首发：2009-03-05，
  
  纸质出版：2009-03-05
- 稿件说明：
移动端阅览
刘长久, 齐美荣, 吴华斌, 等. Fe(Ⅲ)和Al(Ⅲ)复合掺杂非晶态Ni(OH)₂的电极材料及性能[J]. 化工学报, 2009,(3):788-794.

LIU Changjiu, QI Meirong, WU Huabin, et al. Electrode material and performance of amorphous Ni(OH)₂ codoped by Fe(Ⅲ) and Al(Ⅲ)[J]. CIESC Journal, 2009, (3): 788-794.
刘长久, 齐美荣, 吴华斌, 等. Fe(Ⅲ)和Al(Ⅲ)复合掺杂非晶态Ni(OH)₂的电极材料及性能[J]. 化工学报, 2009,(3):788-794. DOI：

LIU Changjiu, QI Meirong, WU Huabin, et al. Electrode material and performance of amorphous Ni(OH)₂ codoped by Fe(Ⅲ) and Al(Ⅲ)[J]. CIESC Journal, 2009, (3): 788-794. DOI：

摘要

采用快速冷冻沉淀法首次成功制备出Fe(Ⅲ)和Al(Ⅲ)复合掺杂非晶态Ni(OH)2粉体材料。通过XRD、SAED、SEM、IR、Raman光谱及DSC-TG等对样品粉体的结构形态进行表征和分析，同时将样品合成电极材料并组装成MH/Ni模拟电池进行电化学性能测试，结果表明，样品材料内部结构缺陷多、无序性强、材料微粒大小比较均匀，并具有较好的分散性，结合水含量较多。将复合掺杂Fe(Ⅲ) 5%和Al(Ⅲ) 8%的样品材料制备镍正极并组装成MH/Ni模拟电池，在以80 mA·g-1恒流充电5.5 h，40 mA·g-1恒流放电，终止电压1.0 V的充放电制度下，进行充放电性能、比容量及其循环性能等电化学性能的测试，放电平台平稳，工作电压高达1.30 V，放电比容量达到357.6 mAh·g-1，且在电极过程中材料的稳定性增强、电化学阻抗较小，循环可逆性较好。

Abstract

Amorphous nickel hydroxide powders codoped by Fe(Ⅲ) and Al(Ⅲ) were prepared by the method of deep freeze deposition. The microstructure and morphology of sample were characterized by XRD

SAED

SEM

Raman spectrometry

TG-DSC and IR

and the electrochemical properties were tested by using a simulated MH-Ni battery composed of amorphous nickel hydroxide particles as active material. The results showed many structure defects

uniform size

and a large amount of crystal water. To investigate the effect of codoped Fe(Ⅲ) and Al(Ⅲ) on the electrochemical performance of the samples

simulated batteries with the prepared codoped nickel hydroxide as cathode active material were assembled. When the charging current

discharging current and end potential were respectively 80 mA·g-1 for 5.5 h

40 mA·g-1 and 1.0 V

the specific capacity was 357.6 mAh·g-1 and the sample had longer discharge time at 1.30 V. In addition

the stability and reversibility of the Fe(Ⅲ) and Al(Ⅲ) codoped samples were good during the charge/discharge process

and the electrochemical impedance was small.

关键词

Keywords

references

浏览量

345

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

不同SK型静态混合器的流场特性及其混合效果分析

高速高温箔片端面密封热气弹耦合性能分析

碱金属改性对SrMnO3催化乙苯化学链氧化脱氢性能的影响规律研究

TPMS-Diamond静态混合器停留时间分布特性研究

机器学习在结晶过程建模与控制中的研究进展

Fe(Ⅲ)和Al(Ⅲ)复合掺杂非晶态Ni(OH)2的电极材料及性能

Electrode material and performance of amorphous Ni(OH)2 codoped by Fe(Ⅲ) and Al(Ⅲ)

DOI：

摘要

Abstract

关键词

Keywords

references

Fe(Ⅲ)和Al(Ⅲ)复合掺杂非晶态Ni(OH)₂的电极材料及性能

Electrode material and performance of amorphous Ni(OH)₂ codoped by Fe(Ⅲ) and Al(Ⅲ)