AIBA·2HCl-NaHSO<sub>3</sub>引发下DMDAAC-AM共聚物的合成与表征

张万忠; 乔学亮; 陈建国; 李绵贵

您当前的位置：

首页 >

文章列表页 >

AIBA·2HCl-NaHSO₃引发下DMDAAC-AM共聚物的合成与表征

材料科学与工程 | 更新时间：2025-12-10

- AIBA·2HCl-NaHSO₃引发下DMDAAC-AM共聚物的合成与表征
- Copolymerization of dimethyl diallyl ammonium chloride and acrylamide by using AIBA·2HCl-NaHSO₃ initiator and characterization
- 化工学报 2005年第10期页码：1998-2003
- 作者机构：
  
  1. 模具技术国家重点实验室，华中科技大学材料学院,湖北,武汉,430074
  2. 湖北省化学研究所,湖北,武汉,430074
- 作者简介：
- 基金信息：
- DOI：
  中图分类号：
- 网络首发：2005-10-25，
  
  纸质出版：2005-10-25
- 稿件说明：
移动端阅览
张万忠, 乔学亮, 陈建国, 等. AIBA·2HCl-NaHSO₃引发下DMDAAC-AM共聚物的合成与表征[J]. 化工学报, 2005,(10):1998-2003.

ZHANG Wanzhong, QIAO Xueliang, CHEN Jianguo, et al. Copolymerization of dimethyl diallyl ammonium chloride and acrylamide by using AIBA·2HCl-NaHSO₃ initiator and characterization[J]. CIESC Journal, 2005, (10): 1998-2003.
张万忠, 乔学亮, 陈建国, 等. AIBA·2HCl-NaHSO₃引发下DMDAAC-AM共聚物的合成与表征[J]. 化工学报, 2005,(10):1998-2003. DOI：

ZHANG Wanzhong, QIAO Xueliang, CHEN Jianguo, et al. Copolymerization of dimethyl diallyl ammonium chloride and acrylamide by using AIBA·2HCl-NaHSO₃ initiator and characterization[J]. CIESC Journal, 2005, (10): 1998-2003. DOI：

摘要

采用偶氮二异丁脒二盐酸盐(AIBA·2HCl)和NaHSO3(RH)组成的引发体系，研究了引发剂浓度、溶液的pH值、引发剂复配和加料方式等因素对二甲基二烯丙基氯化铵(DMDAAC)-丙烯酰胺(AM)共聚合反应规律的影响.结果表明：在30 ℃、nAM∶nDMDAAC=4∶1、ω(monomer) =30％和引发剂AIBA·2HCl-RH的浓度为1.0×10-4 mol·L-1的条件下， pH=7.0时， DMDAAC-AM共聚物的特性黏数达11.56 dl·g-1;pH=10.0时，特性黏数最高达13.60 dl·g-1.采取连续加料方式，可获得阳离子度38.8％，特性黏数达11.61 dl·g-1的共聚物.进一步测得该引发体系30 ℃下，聚合反应的表观活化能为33.25 kJ·mol-1，单体的竞聚率为γAM=6.800，γDMDAAC=0.174.

Abstract

By using AIBA·2HCl-NaHSO3 initiation system，a series of high intrinsic viscosity copolymers of dimethyl diallyl ammonium chloride(DMDAAC) and acrylamide(AM) were prepared in aqueous medium under different conditions.The effects of various factors such as initiator concentration

pH of solution

composite initiator and the way of feeding AM etc.on the copolymerization of dimethyl diallyl ammonium chloride and acrylamide were studied. The results indicated that copolymerization could be initiated at a low temperature.At 30℃

nAM∶nDMDAAC=4∶1

ω(monomer)=30％

c(AIBA·2HCl)=1.0×10-4 mol·L-1，when the monomer solution was polymerized at pH=7.0，the intrinsic viscosity of PDMDAAC-AM was 11.56 dl·g-1;when the monomer solution was polymerized at pH=10.0，the intrinsic viscosity of copolymer was up to 13.60 dl·g-1.If continuous feeding of AM was used

the cationicity and intrinsic viscosity of copolymer could attain 38.8％ and 11.61 dl·g-1.Furthermore

the monomer reactivity ratios and apparent activation energy of the polymerization system were determined.

关键词

Keywords

references

浏览量

651

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

TiO2纳米管的制备及对O3的催化性能

丙烯腈/N-乙烯基吡咯烷酮共聚物结构和热解反应表观活化能

GeCl4-MxCly-H2体系下锗-杂质竞争沉积热力学研究

塔式太阳能辅助超临界压缩CO2储能系统热力学性能

Ca（OH）2/CaO间接反应器储释热循环性能优化

AIBA·2HCl-NaHSO3引发下DMDAAC-AM共聚物的合成与表征

Copolymerization of dimethyl diallyl ammonium chloride and acrylamide by using AIBA·2HCl-NaHSO3 initiator and characterization

DOI：

摘要

Abstract

关键词

Keywords

references

AIBA·2HCl-NaHSO₃引发下DMDAAC-AM共聚物的合成与表征

Copolymerization of dimethyl diallyl ammonium chloride and acrylamide by using AIBA·2HCl-NaHSO₃ initiator and characterization