增湿温度与气体流速对PEMFC阴极流道内液态水分布及排水影响

马海鹏; 张华民; 胡军; 才英华

您当前的位置：

首页 >

文章列表页 >

增湿温度与气体流速对PEMFC阴极流道内液态水分布及排水影响

能源和环境工程 | 更新时间：2025-12-10

- 增湿温度与气体流速对PEMFC阴极流道内液态水分布及排水影响
- Effects of humidification temperature and gas velocity on liquid water distribution and removal in cathode channel of PEMFC
- 化工学报 2007年第9期页码：2357-2362
- 作者机构：
  
  1. 中国科学院大连化学物理研究所燃料电池关键材料与技术实验室
  2. 中国科学院研究生院
- 作者简介：
- 基金信息：
- DOI：
  中图分类号：
- 网络首发：2007-09-05，
  
  纸质出版：2007-09-05
- 稿件说明：
移动端阅览
马海鹏, 张华民, 胡军, 等. 增湿温度与气体流速对PEMFC阴极流道内液态水分布及排水影响[J]. 化工学报, 2007,(9):2357-2362.

MA Haipeng, ZHANG Huamin, HU Jun, et al. Effects of humidification temperature and gas velocity on liquid water distribution and removal in cathode channel of PEMFC[J]. CIESC Journal, 2007, (9): 2357-2362.
马海鹏, 张华民, 胡军, 等. 增湿温度与气体流速对PEMFC阴极流道内液态水分布及排水影响[J]. 化工学报, 2007,(9):2357-2362. DOI：

MA Haipeng, ZHANG Huamin, HU Jun, et al. Effects of humidification temperature and gas velocity on liquid water distribution and removal in cathode channel of PEMFC[J]. CIESC Journal, 2007, (9): 2357-2362. DOI：

摘要

通过直条单流道可视化PEM单池研究了阴极流道内液态水的传递行为，给出了液态排水与流道进、出口压降间的直接关系。结合可视化与压降测量，开发一种评价流道内液态水积累及排出的新方法，考察了增湿温度与气体流速对流道内液态水分布及排水的影响。随着增湿温度提高，存水区域由流道下部向进口扩展。对于给定流道，存在一特定流速。在该流速下液滴临界直径与流道尺寸相当，流道内液态水积累最严重。在本实验条件下，该特定流速为2 m·s-1。为了及时排出液态水，气体流速不能低于3 m·s-1。

Abstract

A transparent PEM single cell with a single straight channel was used to investigate the liquid water transport in the cathode channel.The direct relationship between liquid water removal and pressure-drop between inlet and outlet of the channel was obtained.A diagnostic method was developed to evaluate liquid water accumulation and removal in the channel by combining visualization and pressure-drop measurement.With the increase in humidification temperature

the region of liquid water extended from the lower part of the channel towards the inlet.For a given flow channel

there was a specific velocity

at which the droplet critical diameter was comparable with the channel size and liquid water accumulation in the channel was the highest.Under the study conditions

the specific velocity was 2 m·s-1.To discharge the liquid water in time

gas velocity should not be lower than 3 m·s-1.

关键词

Keywords

references

浏览量

225

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

微通道内低沸点工质流动沸腾压降特性

矩形小通道内气液两相流垂直向上流动特性

高压下多管旋风分离器压降模型

析湿工况下波纹翅片管换热器空气侧换热与压降特性

水合物浆在管道中的流动安全