规整填料干塔压降与波纹齿角的关系

罗淑娟; 宋新月; 费维扬

您当前的位置：

首页 >

文章列表页 >

规整填料干塔压降与波纹齿角的关系

多相流和计算流体力学 | 更新时间：2025-12-10

- 规整填料干塔压降与波纹齿角的关系
- Relationship between channel opening angle and dry-bed pressure drop of structured packing
- 化工学报 2007年第11期页码：2764-2769
- 作者机构：
  
  清华大学化工系化学工程联合国家重点实验室
- 作者简介：
- 基金信息：
- DOI：
  中图分类号：
- 网络首发：2007-11-05，
  
  纸质出版：2007-11-05
- 稿件说明：
移动端阅览
罗淑娟, 宋新月, 费维扬. 规整填料干塔压降与波纹齿角的关系[J]. 化工学报, 2007,(11):2764-2769.

LUO Shujuan, SONG Xinyue, FEI Weiyang. Relationship between channel opening angle and dry-bed pressure drop of structured packing[J]. CIESC Journal, 2007, (11): 2764-2769.
罗淑娟, 宋新月, 费维扬. 规整填料干塔压降与波纹齿角的关系[J]. 化工学报, 2007,(11):2764-2769. DOI：

LUO Shujuan, SONG Xinyue, FEI Weiyang. Relationship between channel opening angle and dry-bed pressure drop of structured packing[J]. CIESC Journal, 2007, (11): 2764-2769. DOI：

摘要

研究了规整填料压降和波纹齿角的关系，以期探索强化传统规整填料性能的新途径。干填料层压降可分解为3部分：气流在交叉单元碰撞所产生的压降，气流在填料层间改变方向所产生的压降以及塔壁区摩擦力所产生的压降。用计算流体力学（CFD）计算了这3部分压降。结果表明，当波纹齿角从90°减小到20°时，干填料层压降大幅度下降。实验数据也验证了CFD模拟计算结果。

Abstract

The relationship between pressure drop and channel opening angle of structured packing was studied in order to develop a new approach to intensifying the traditional structured packing.The overall dry-bed pressure drop could be divided into three different parts

which were caused

respectively

by the gas-gas collision in the crisscross junction

the direction change in the interlayer junction

and the drag near the wall zones.The computational fluid dynamics (CFD)software was used to calculate these three kinds of pressure drop.It was shown from the results that the dry-bed pressure drop could decrease significantly when the channel opening angle decreased from traditional about 90° to 20°.The CFD simulations were consistent with the experimental data.

关键词

Keywords

references

浏览量

524

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

微通道内低沸点工质流动沸腾压降特性

矩形小通道内气液两相流垂直向上流动特性

高压下多管旋风分离器压降模型

析湿工况下波纹翅片管换热器空气侧换热与压降特性

水合物浆在管道中的流动安全