In order to study the flow in the completely symmetric structure of the converging-diverging tube such as Venturi
the incompressible unsteady flow numerical models are established respectively for two dimensional channels and three dimensional tubes
and the numerical simulation method is adopted in the study. This paper confirms the flow bifurcation phenomenon
and mainly discusses the asymmetric flow in the symmetric structure. The simulation results show that
when Reynolds number reaches a critical value
the flow field in the symmetric Venturi tube will appear the asymmetric phenomenon
and produce irregular recirculation zones in the extended corner. In addition
the study indicates that the flow characteristics in the symmetric converging-diverging tube are affected by Reynolds number and geometry shape of tube
and the variation rules which flow asymmetric characteristics change with Reynolds number and geometry shape are obtained.
Study on influence of jet flow on slurry transport characteristics in slurry chamber of shield tunneling machines
Impact of turbulence model in coupled simulation of ethylene cracking furnace
Numerical simulation of cold state liquid flow in scrubbing-cooling ring
Research on two-phase flow and heat transfer characteristics in precooling process of low-temperature pipelines based on one-dimensional drift-flux model
Study on flow and heat transfer mechanism of supercritical CO2 in inclined upward tube under cooling conditions