Calculation of vapor compression heat pump evaporator gravity-independent

MA Rui; WU Yuting; LIU Gang; MA Chongfang

doi:10.3969/j.issn.0438-1157.2014.z1.020

您当前的位置：

首页 >

文章列表页 >

Calculation of vapor compression heat pump evaporator gravity-independent

更新时间：2025-12-10

- Calculation of vapor compression heat pump evaporator gravity-independent
- CIESC Journal Issue S1, Pages: 125-129(2014)
- 作者机构：
  
  北京工业大学环境与能源工程学院,北京,100124
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.z1.020
  CLC： 359+.1
- Online First：30 May 2014，
  
  Published：30 May 2014
- 稿件说明：
移动端阅览
MA Rui, WU Yuting, LIU Gang, et al. Calculation of vapor compression heat pump evaporator gravity-independent[J]. CIESC Journal, 2014, (S1): 125-129.
DOI：

MA Rui, WU Yuting, LIU Gang, et al. Calculation of vapor compression heat pump evaporator gravity-independent[J]. CIESC Journal, 2014, (S1): 125-129. DOI： 10.3969/j.issn.0438-1157.2014.z1.020.

摘要

蒸汽压缩热泵在高温环境和大功率航天器热控系统中具有很好的应用前景。航天蒸汽压缩热泵运行在微重力环境中，蒸汽压缩热泵的微重力适应性是航天蒸汽压缩热泵研发的关键技术。蒸发器是蒸汽压缩热泵的关键部件，为了探究蒸发器的重力无关条件，进行了蒸汽压缩热泵蒸发器的重力无关性计算，获得了不同蒸发温度、不同流速下蒸发器的重力无关临界流速和临界直径。结果表明，蒸发器处于重力无关区的最小临界流速在1.45～1.5 m·s-1。最大临界直径随制冷量的增加而增加，制冷量从50 W变为300 W，临界直径由0.42 mm变为1.02 mm。

Abstract

Vapor compression heat pump has a good prospect of application in high temperature environments and high-power spacecraft thermal control system. Aerospace vapor compression heat pump operates in the microgravity environment. Microgravity vapor compression heat pump adaptability is the key to a vapor compression heat pump technology aerospace research and development. The evaporator is a key component of the vapor compression heat pump.By calculating vapor compression heat pump evaporator to explore its gravity-independent conditions and get gravity-independent critical velocity and critical diameter at different evaporation temperatures and under different flow rates. The results showed that the minimum critical velocity in the evaporator gravity-independent region in 1.45-1.5 m·s-1. The maximum critical diameter increases with cooling capacity

and cooling capacity from 50 W to 300 W

the critical diameter from 0.42 mm to 1.02 mm.

关键词

Keywords

references

Views

181

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Simulation research on the boiling heat transfer characteristics of liquid sodium under microgravity

Realization of microgravity environment by magnetic compensation and study on interior corner flow of magnetic fluid in microgravity

Review of enhanced boiling heat transfer over micro-pin-finned surfaces

Experimental study on condensation of FC-72 in narrow rectangular channel with ellipse-shape pin fins in microgravity

Prediction of biomass pyrolysis product yield based on machine learning algorithms

Related Author

WANG Tianyu

HE Yurong

ZENG Yufeng

Liang ZHANG

Shaohua BU

Rui ZHUAN

Yonghua HUANG

Yitao LIANG

Related Institution

School of Energy Science and Engineering, Harbin Institute of Technology

Heilongjiang Key Laboratory of New Energy Storage Materials and Processes

Zhengzhou Research Institute, Harbin Institute of Technology

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University

Shanghai Aerospace System Engineering Institute

⁰