Physico-mechanical properties and heat-resistant mechanism of nano-MH/AF/NBR composite

王其磊

doi:10.3969/j.issn.0438-1157.2014.12.054

您当前的位置：

首页 >

文章列表页 >

Physico-mechanical properties and heat-resistant mechanism of nano-MH/AF/NBR composite

更新时间：2025-12-10

- Physico-mechanical properties and heat-resistant mechanism of nano-MH/AF/NBR composite
- CIESC Journal Issue 12, Pages: 5047-5053(2014)
- 作者机构：
  
  中国人民武装警察部队学院,河北,廊坊,065000
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.12.054
  CLC： U599F767.5
- Online First：05 December 2014，
  
  Published：05 December 2014
- 稿件说明：
移动端阅览
王其磊. Physico-mechanical properties and heat-resistant mechanism of nano-MH/AF/NBR composite[J]. CIESC Journal, 2014, (12): 5047-5053.
DOI：

王其磊. Physico-mechanical properties and heat-resistant mechanism of nano-MH/AF/NBR composite[J]. CIESC Journal, 2014, (12): 5047-5053. DOI： 10.3969/j.issn.0438-1157.2014.12.054.

摘要

为了获得具有较好物理力学性能和耐热阻燃性能的橡胶密封材料

以NBR、芳纶纤维(AF)和纳米Mg(OH)2(MH)为主要原料制备了纳米MH/AF/NBR复合材料.研究了纳米MH和AF不同配比时

复合材料的物理力学性能变化、耐热阻燃性能变化.结果表明:纳米MH对复合材料内部结构有很好的补强作用

而AF添加量较多时

与橡胶的结合强度有变差的趋势.不同配比的纳米MH与AF能够有效改善NBR的物理力学性能.当纳米MH与AF填料配比份数配比为20/10时

复合材料的拉伸强度、定伸应力可以提高4%左右

永久压缩变形降低1%左右

当纳米MH/AF份数配比为30/10时

硬度提高到73度.比较发现纳米MH的阻燃性能要优于AF

纳米MH/AF份数配比为10/10时

复合材料分解温度提高了近20℃

MH/AF填料的加入改善了NBR原有的热稳定性

且复合材料燃烧时烟气生成量较小

为该类复合材料在密封等领域进一步应用奠定了基础.

Abstract

In order to produce a rubber sealing material with satisfactory physical and mechanical properties

heat resistance

and flame retardance

a nano MH/AF/NBR composite material was made by using nitrile butadiene rubber (NBR)

aramid fiber (AF)

and nano magnesium hydroxide (MH). Physical and mechanical performance

heat resistance

and flame retardance of the composite material were investigated for different proportions of nano MH and AF. Nano MH reinforced the internal structure of the composite material. The bond strength between AF and rubber matrix decreased with increasing amount of AF in the composite. When MH/AF ratio was 20/10

the stress at definite elongation and tensile strength were increased by 4%

and compression set was reduced by 1%. When MH/AF ratio was 30/10

hardness increased to 73 degree. The nano MH/AF composite had good flame retardance and improved thermal stability of NBR. Additionally

the total smoke production of the composite material was reduced. The results established a foundation for further applications using the nano MH/AF/NBR composite material as a sealant.

关键词

Keywords

references

Views

332

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Performance analysis and structural optimization of double-sided spiral groove-type dry gas seal

Preparation of biobased polyurethane adhesives for flexible packaging and their water-resistance and thermal stability assessment

Synthesis and properties of ternary random copolyester PBSF based on 2,5-furandicarboxylic acid

Intelligent optimization and deformation analysis of novel flexible dam foil face gas seal

Improved designs of negative Poisson’s ratio structure and their applications in aerospace engineering

Related Author

WANG Yan

WANG Yutong

CHEN Miaomiao

HE Yiming

LIU Wei

DING Dejun

MA Chenbo

ZHANG Chening

Related Institution

Sinoseal Holding Co., Ltd.

School of Mechanical and Electronic Engineering, Nanjing Forestry University

Ningbo Fangli Seals Co., Ltd.

School of Mechanical Engineering, Jiangsu Ocean University

Zhongshan Kingho Chemical Co., Ltd.

⁰