Structural parameter optimization of spiral groove dry gas seal under low or medium pressure

PENG Xudong; JIANG Jinbo; BAI Shaoxian; LI Jiyun; WANG Yuming

doi:10.3969/j.issn.0438-1157.2014.11.046

您当前的位置：

首页 >

文章列表页 >

Structural parameter optimization of spiral groove dry gas seal under low or medium pressure

更新时间：2025-12-10

- Structural parameter optimization of spiral groove dry gas seal under low or medium pressure
- CIESC Journal Issue 11, Pages: 4536-4542(2014)
- 作者机构：
  
  浙江工业大学过程装备及其再制造教育部工程研究中心,浙江,杭州,310014
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.11.046
  CLC： H117.2
- Online First：05 November 2014，
  
  Published：05 November 2014
- 稿件说明：
移动端阅览
PENG Xudong, JIANG Jinbo, BAI Shaoxian, et al. Structural parameter optimization of spiral groove dry gas seal under low or medium pressure[J]. CIESC Journal, 2014, (11): 4536-4542.
DOI：

PENG Xudong, JIANG Jinbo, BAI Shaoxian, et al. Structural parameter optimization of spiral groove dry gas seal under low or medium pressure[J]. CIESC Journal, 2014, (11): 4536-4542. DOI： 10.3969/j.issn.0438-1157.2014.11.046.

摘要

基于完全析因设计方法

开展中低压干气密封端面螺旋槽几何结构参数优化.基于气体润滑理论

对中低压条件下螺旋槽干气密封的动压开启力增长率、气膜刚度和刚漏比等密封特性参数进行分析

获得了中压和低压条件下螺旋槽几何结构参数的优选值范围

提出"螺旋槽干气密封特性参数优化带".结果表明:特性参数优化带能较好地反映螺旋槽干气密封在不同压缩数下的最优性能水平;在中低压高速条件下

当螺旋角b=10°～25°

槽深hg=5～10 mm时能获得较优的密封性能;当槽坝比ag=1.5～4.0

槽长宽比l=2～8时能获得较好的动压效应和轴向气膜稳定性;当槽坝比ag=0.7～1.5

槽长宽比l=2～5时能获得较好的综合密封性能.

Abstract

Based on full factorial design

optimization of structural parameters of a spiral groove dry gas seal (S-DGS) under low or medium pressure was performed. Based on the theory of gas lubrication

the sealing characteristic parameters

such as increase ratio of hydrodynamic open force

film stiffness and film stiffness to leakage ratio of an S-DGS under low or medium pressure were analyzed

and the preferred value ranges of structural parameters of spiral grooves were obtained. The concept of characteristic parameter optimization zone of an S-DGS was presented. The optimum sealing performance with different compressibility numbers of an S-DGS could be properly reflected by characteristic parameter optimization zone. When an S-DGS was operated under low or medium pressure and at high-speed

excellent sealing performance could be obtained for an S-DGS when spiral angle was between 10° and 25° and groove depth was between 5 mm and 10 mm. Excellent hydrodynamic effect and axis film stability could be obtained when groove-to-dam ratio was between 1.5 and 4.0 and groove length-width ratio was between 2 to 8. Excellent comprehensive sealing performance could be obtained when groove-to-dam ratio was between 0.7 and 1.5

groove length-width ratio was between 2 to 5.

关键词

Keywords

references

Views

218

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on the influence of nonlinear effect on performance of dry gas seal under film thickness disturbance

Analysis of tribological test and performance under rings end faces of spiral groove dry gas seal

Analysis of performance of spiral groove dry gas seal considered effects of both real gas and slip flow

Performance analysis and structural optimization of double-sided spiral groove-type dry gas seal

Influence of micro-texture size and areal density on surface of silicon carbide on tribological properties of sliding sealing surfaces

Related Author

Hao SHANG

Yuan CHEN

Xiaolu LI

Bingqing WANG

Yuntang LI

Xudong PENG

DING Xuexing

WANG Pingxi

Related Institution

College of Quality and Safety Engineering, China Jiliang University

College of Mechanical Engineering, Zhejiang University of Technology

College of Mechanical and Electrical Engineering, China Jiliang University

Fluid Sealing Measurement and Control Engineering Research and Development Center of Jiangsu Province, Nanjing Polytechnic Institute

College of Petrochemical Industry, Lanzhou University of Technology

⁰