Structure and performance of dye dispersant sodium lignosulfonate with different molecular weight

YANG Dongjie; LI Huijing; BAI Mengxian; QIU Xueqing

doi:10.3969/j.issn.0438-1157.2014.10.051

您当前的位置：

首页 >

文章列表页 >

Structure and performance of dye dispersant sodium lignosulfonate with different molecular weight

更新时间：2025-12-10

- Structure and performance of dye dispersant sodium lignosulfonate with different molecular weight
- CIESC Journal Issue 10, Pages: 4138-4144(2014)
- 作者机构：
  
  华南理工大学化学与化工学院,广东,广州,510640
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.10.051
  CLC： Q610.42
- Online First：05 October 2014，
  
  Published：05 October 2014
- 稿件说明：
移动端阅览
YANG Dongjie, LI Huijing, BAI Mengxian, et al. Structure and performance of dye dispersant sodium lignosulfonate with different molecular weight[J]. CIESC Journal, 2014, (10): 4138-4144.
DOI：

YANG Dongjie, LI Huijing, BAI Mengxian, et al. Structure and performance of dye dispersant sodium lignosulfonate with different molecular weight[J]. CIESC Journal, 2014, (10): 4138-4144. DOI： 10.3969/j.issn.0438-1157.2014.10.051.

摘要

采用超滤方法对木质素磺酸钠进行分离得到3种不同分子量级份。采用凝胶渗透色谱、紫外光谱、电位滴定等方法研究各级份的结构特征及其对分散染料性能的影响。结果表明，随着分子量的增加，木质素磺酸钠颜色加深、纯度提高，分子结构中愈创木基含量增多，酚羟基、磺酸基和羧基的含量降低；高分子量木质素磺酸钠对分散染料具有更优的分散性和高温稳定性，染料上染率也随其分子量的增大而增加，且当木质素磺酸钠浓度较高时，分子量增大，对纤维沾污减弱。木质素磺酸钠对染料的还原破坏作用与分子量和酚羟基含量有关，采用截留分子量大于2.5×103的膜提纯的木质素磺酸钠级份对染料还原性最低，还原水解率由未提纯时的26.0%降为6.9%，且该级份木质素磺酸钠具有最优的匀染性能。

Abstract

Three purified sodium lignosulfonate (SL) samples with various molecular weights were prepared by fractionation using ultrafiltration.The structural characteristics of SL samples and its effect on performance of dye are investigated by means of gel permeation chromatography

ultraviolet spectrophotometry

electrolytic titration and high temperature dying process. The results show that

with increase of molecular weight

the color of SL becomes darker

its purity increases

and the content of guaiacyl increases while phenolic hydroxyl

carboxyl and sulfonic decrease. The SL with high molecular weight is of good dispersibility and high temperature stability for dispersing dyestuff

and the dyeing rate of dyestuff increases also with increase of SL molecular weight. The staining of SL for fiber could be weakened when its molecular weight is larger and its concentration is higher. In addition

the reduction destruction of SL for dyestuff depends on molecular weights and the content of phenolic hydrophilic group. The SL fraction with molecular weight above 2.5?103 can make dyestuff the most excellent levelling property and the lowest reduction effect

the reduction and hydrolysis rate reduce from 26.0% of unpurified SL to 6.9%.

关键词

Keywords

references

Views

468

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Influences of lignin fractionation on its utilization

Ultrafiltration membrane cleaning technology and mechanism based on seawater desalination pilot equipment

Progress research on development of membrane technology and materials for health industry

Research on the characterization of the molecular weight and its distribution of perfluoropolyether

Research progress of ionic liquids in separation of aromatics/alkanes and olefins/alkanes

Related Author

Jiangli WANG

Min XUE

Chengke ZHAO

Fengxia YUE

Xiaohan SUN

Xingtao YANG

Xiaodong ZHANG

Wenguang WANG

Related Institution

College of Light Industry Science and Engineering, South China University of Technology

College of Environment and Safety Engineering, Qingdao University of Science & Technology

Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences

Qingdao Befesa Seawater Desalination Co. Ltd.

Nanjing Industrial Technology Research Institute of Membrane Material Co., Ltd.

⁰