Blockage of triangle leakage zones in heat exchanger with helical baffles

WANG Simin; MING Yusheng; CHEN Kang; ZHANG Zaoxiao; WEN Jian; XUE Yulan

doi:10.3969/j.issn.0438-1157.2014.09.011

您当前的位置：

首页 >

文章列表页 >

Blockage of triangle leakage zones in heat exchanger with helical baffles

更新时间：2025-12-10

- Blockage of triangle leakage zones in heat exchanger with helical baffles
- CIESC Journal Issue 9, Pages: 3389-3394(2014)
- 作者机构：
  
  1. 西安交通大学化学工程与技术学院,陕西,西安,710049
  2. 西安交通大学能源与动力工程学院,陕西,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.09.011
  CLC： K124
- Online First：05 September 2014，
  
  Published：05 September 2014
- 稿件说明：
移动端阅览
WANG Simin, MING Yusheng, CHEN Kang, et al. Blockage of triangle leakage zones in heat exchanger with helical baffles[J]. CIESC Journal, 2014, (9): 3389-3394.
DOI：

WANG Simin, MING Yusheng, CHEN Kang, et al. Blockage of triangle leakage zones in heat exchanger with helical baffles[J]. CIESC Journal, 2014, (9): 3389-3394. DOI： 10.3969/j.issn.0438-1157.2014.09.011.

摘要

目前普遍使用的螺旋折流板换热器壳程的一个螺距主要采用4块平面折流板结构，但在相邻两块折流板的直边搭接处存在顶角相对的两个三角漏流区，使壳程流体偏离理想的螺旋流，严重影响了换热器的性能。采用折面折流板结构，可以封闭原始折流板之间的外侧三角漏流区，使壳程流体更接近连续的螺旋流动。实验结果表明，采用折面折流板代替原始的平面折流板后，换热器总传热系数增加6.7%～19.1%，平均增大16.9%，表明此折面折流板能有效提高螺旋折流板换热器的换热性能。虽然壳程压降也随之增大，但带来的泵耗功率增量非常有限。换热器的热性能因子均大于1.0，平均值为1.071，表明结构改进后的换热器，其综合性能平均提高7.1%。基于实验数据，拟合了结构改进前后的换热器壳程传热系数和阻力系数的相关实验关联式。研究结果对于换热器的节能优化具有重要的指导意义。

Abstract

Four fan-shaped baffles are used to form a pitch in shell side of heat exchangers with helical baffles. There are two triangular leakage zones between the two adjacent baffles

making the shell-side fluid deviate from ideal plug flow and degrading the heat transfer performance of the heat exchanger. In this paper

the structure of fold baffle is used to block the external triangular leakage zones

so the shell-side fluid flows in approximately continuous spiral flow. The heat transfer experiments are used to evaluate the performance of the improved heat exchanger. The experimental results show that the shell-side heat transfer coefficient is increased by 11.6%-21.6% and the overall heat transfer coefficient is increased by 6.7%-19.1% with an average value of 16.9%

compared with that of conventional heat exchanger with plain baffles. The heat transfer of improved heat exchanger is intensified obviously. Although the shell-side pressure drop increases correspondingly

the increment in pumping power consumption is limited. The values of thermal performance factor are all above 1.0

with an average value of 1.071. It demonstrates that taking into account heat transfer coefficient and pressure drop

better integrative performance is obtained through the configuration optimization of baffles. It is benefit to optimizing design for heat exchangers with helical baffles.

关键词

Keywords

references

Views

382

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage

Study on structure optimization of heat exchanger and evaluation index of heat transfer performance

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Calibration method and experimental validation for resolving inverse heat conduction problem with constant temperature on back surface

Identification of gas-liquid two-phase flow patterns in a riser based on recursive characteristics and CNN

Related Author

WANG Chenchen

ZHANG Jinya

SUN Na

Xiufeng LIU

Shi ZHANG

Zhijie ZHOU

Hao ZHENG

Chengze WANG

Related Institution

School of Mechanical and Storage and Transportation Engineering, China University of Petroleum

Military Representation Office of Military Representative Bureau of Naval Equipment Department in Wuhan Area

China Ship Development and Design Center

MOE Key Laboratory of Thermal Fluid Science and Engineering, Xi’an Jiaotong University

School of Mechanical and Power Engineering, Zhengzhou University

⁰