Heat transfer enhancement in gas-solid flow

LIU Chuanping; LI Chuan; LI Yongliang; DING Yulong; WANG Li

doi:10.3969/j.issn.0438-1157.2014.07.010

您当前的位置：

首页 >

文章列表页 >

Heat transfer enhancement in gas-solid flow

更新时间：2025-12-10

- Heat transfer enhancement in gas-solid flow
- CIESC Journal Issue 7, Pages: 2485-2494(2014)
- 作者机构：
  
  1. 北京科技大学机械工程学院,北京,100083
  2. Shool of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham B13.2TT,UK
  3. Institute of Particle Science and Engineering, University of Leeds, Leeds LS2.9JT,UK
  4. 中国科学院过程工程研究所,北京,100090
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.07.010
  CLC： Q022.4
- Online First：05 July 2014，
  
  Published：05 July 2014
- 稿件说明：
移动端阅览
LIU Chuanping, LI Chuan, LI Yongliang, et al. Heat transfer enhancement in gas-solid flow[J]. CIESC Journal, 2014, (7): 2485-2494.
DOI：

LIU Chuanping, LI Chuan, LI Yongliang, et al. Heat transfer enhancement in gas-solid flow[J]. CIESC Journal, 2014, (7): 2485-2494. DOI： 10.3969/j.issn.0438-1157.2014.07.010.

摘要

在气流中加入颗粒，形成气固两相流。根据气流速度的不同，气固两相流分为鼓泡流态化、快速流态化、气力输送等形式。不同的流动形态，两相流内颗粒浓度及颗粒的运动规律不同，其传热特点也存在差异。通过回顾几种多相流流态的传热特点，总结了多相流与传热面换热的影响因素、气固两相流的传热机理与模型。气固两相流中颗粒浓度、颗粒运动对其传热起决定性作用，而操作参数（气流速度、床层压力、床层温度等）则主要通过改变颗粒浓度和颗粒运动影响传热。此外，通过气固两相流强化传热的应用实例——气固两相流与填充床的热交换，分析了颗粒在对流换热中所起的作用，并进一步提出了今后研究方向和难点所在。

Abstract

By adding particles into a gas flow

a gas-solid flow is formed. As the gas velocity increases

the gas-solid flow shows different patterns as bubbling fluidization

circulating fluidization and pneumatic conveying

in which the concentration of particles and the motion of gas-solid mixture are different

influencing the heat transfer between the gas-solid flow and immersed surface. In this paper

the heat transfer characters of the three flow patterns are reviewed

and the influencing factors

heat transfer mechanism and models are summarized. The concentration of particles and their movement play a decisive role on the heat transfer

and the operating parameters (gas velocity

bed pressure

bed temperature

etc) influence the heat transfer through changing the particle concentration and movement. A case of heat transfer enhancement

the heat exchange between gas-solid mixture and fixed bed

is analyzed. In addition

the future research area and the difficulty are presented.

关键词

Keywords

references

Views

981

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Review of research on liquid cooling technology for data centers

Synergistic mechanism in open microchannel and jet impingement hybrid cooling system

Heat transfer characteristics of oblique droplet impact on liquid film

Simulation research on the boiling heat transfer characteristics of liquid sodium under microgravity

Simulation experiment on direct cooling thermal management system for energy storage batteries

Related Author

YANG Lei

YANG Hui

XU Jingfang

ZHU Xiujuan

LI Yifei

GUO Yuming

ZHAO Liang

BAO Minle

Related Institution

School of Environmental and Energy Engineering, Beijing University of Civil Engineering and Architecture

Digital Infrastructure Institute, Shanghai Posts Telecommunications Design Consulting Institute Company Limited

National Engineering Research Center for Residential Buildings and the Living Environment, China Architecture Design and Research Group

State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University

Automotive New Technology Research Institute, BYD Company Limited

⁰