A novel multi-layer and multi-zone redox FCC regenerator design for removing NO<sub>x</sub> gas system

LI Jun; LUO Guohua; WEI Fei

doi:10.3969/j.issn.0438-1157.2014.07.004

您当前的位置：

首页 >

文章列表页 >

A novel multi-layer and multi-zone redox FCC regenerator design for removing NO_x gas system

更新时间：2025-12-10

- A novel multi-layer and multi-zone redox FCC regenerator design for removing NO_x gas system
- CIESC Journal Issue 7, Pages: 2426-2436(2014)
- 作者机构：
  
  清华大学化学工程系, 绿色反应工程与工艺北京市重点实验室,北京,100084
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.07.004
  CLC： E992.1
- Online First：05 July 2014，
  
  Published：05 July 2014
- 稿件说明：
移动端阅览
LI Jun, LUO Guohua, WEI Fei. A novel multi-layer and multi-zone redox FCC regenerator design for removing NO_x gas system[J]. CIESC Journal, 2014, (7): 2426-2436. DOI: 10.3969/j.issn.0438-1157.2014.07.004.
DOI：

LI Jun, LUO Guohua, WEI Fei. A novel multi-layer and multi-zone redox FCC regenerator design for removing NO_x gas system[J]. CIESC Journal, 2014, (7): 2426-2436. DOI: 10.3969/j.issn.0438-1157.2014.07.004. DOI：

摘要

系统论述了当前主要的脱硝技术、流化催化裂化（FCC）再生工艺及FCC再生过程NOx产生和转化规律。O2是影响催化剂脱硝活性的主要因素，从反应器尺度精确控制烧焦再生反应，严格控制过剩氧含量，是提高脱硝效率的一条可行途径。提出了通过再生器内部结构和工艺设计创造出具有氧化区和还原区多层多区的新型再生工艺脱硝思路。从降低NOx角度考虑，再生温度应不高于700℃，再生烟气中CO浓度不低于4%，O2浓度至少低于1%。这种新的再生器脱硝是一种经济、高效的脱硝技术，已在中石油大港石化FCC工业装置得到了初步验证，为FCC再生装置和其他化工过程脱硝提供了新思路。

Abstract

The development of NOx reduction strategy

the fluid catalytic cracking (FCC) regeneration process and the formation and conversion of NOx are summarized. O2 is a strong inhibiter of the reaction of NO reduction by CO. It should be an efficient NOx reduction way by controlling O2 concentration of the regenerator. A new type of a multi-layer multi-zone with oxidation zone and reduction zone NOx reduction technology is proposed. This new regeneration process could have characteristics of low carbon content

short regeneration time

high burning intensity

and counter-current contact with catalyst and air. In view of NOx reduction

regeneration temperature should be less than 700℃

CO concentration in regenerator no less than 4% and O2 concentration in regenerator less than 1% at least. This novel FCC regenerator technology is a highly efficient and economical NOx reduction technology

which has been demonstrated in the FCC plant of PetroChina Dagang Petrochemical Company

and might be applied to other FCC process or coal combustion for NOx reduction.

关键词

Keywords

references

Views

730

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Removal of marine diesel engine exhaust pollutants with DOC+SCR technologies

Mechanism of nitric oxides reduction by carbon monoxide over cobalt oxides supported by CeO2 nanorod

FT-IR study of formation and decomposition of ammonium bisulfates on surface of SCR catalyst for nitrogen removal

Regression models of mechanical strength and porosity of V2O5-WO3/TiO2 deNOx catalysts by response surface methodology

Crystal structures, electronic structures and conductivity of Si highly doped RuO2

Related Author

WANG Zongyu

KUANG Hailang

ZHANG Jifeng

JI Yulong

WANG Luyuan

CHENG Xingxing

ZHANG Xingyu

MA Chunyuan

Related Institution

College of Marine Engineering, Dalian Maritime University

School of Energy and Power Engineering, Shandong University

Key Laboratory for Energy Thermal Conversion and Control of Ministry of Education, College of Energy and Environment, Southeast University

School of Chemistry and Chemical Engineering, University of Jinan

Fujian Institute of Metallurgical Engineering

⁰

A novel multi-layer and multi-zone redox FCC regenerator design for removing NOx gas system

DOI：10.3969/j.issn.0438-1157.2014.07.004

摘要

Abstract

关键词

Keywords

references

A novel multi-layer and multi-zone redox FCC regenerator design for removing NO_x gas system