Fine grid DEM simulation of bed layer height in bubbling fluidized-bed

WU Guorong; OUYANG Jie

doi:10.3969/j.issn.0438-1157.2014.06.020

您当前的位置：

首页 >

文章列表页 >

Fine grid DEM simulation of bed layer height in bubbling fluidized-bed

更新时间：2025-12-10

- Fine grid DEM simulation of bed layer height in bubbling fluidized-bed
- CIESC Journal Issue 6, Pages: 2092-2097(2014)
- 作者机构：
  
  1. 西北工业大学理学院,陕西,西安,710129
  2. 甘肃民族师范学院数学系, 甘肃合作,747000
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.06.020
  CLC： Q051.1
- Online First：05 June 2014，
  
  Published：05 June 2014
- 稿件说明：
移动端阅览
WU Guorong, OUYANG Jie. Fine grid DEM simulation of bed layer height in bubbling fluidized-bed[J]. CIESC Journal, 2014, (6): 2092-2097.
DOI：

WU Guorong, OUYANG Jie. Fine grid DEM simulation of bed layer height in bubbling fluidized-bed[J]. CIESC Journal, 2014, (6): 2092-2097. DOI： 10.3969/j.issn.0438-1157.2014.06.020.

摘要

气固流化床DEM的细网格模拟中，采用传统方法计算网格空隙率和局部空隙率会对模拟结果造成较大偏差，给出一个精确面积分数模型和一个完全依赖颗粒环境的局部空隙率模型，从而更加合理地计算网格空隙率和局部空隙率。采用二倍颗粒直径的细网格模拟了小规模鼓泡流化床，模拟的气泡形状和尺寸与实验结果接近。模拟结果表明：采用给出的面积分数模型和局部空隙率模型能较好地模拟鼓泡流化床床层高度随时间变化的波形。

Abstract

For fine-grid DEM simulation of gas-solids fluidized-bed

the traditional methods of calculating grid porosity and local porosity lead to large deviations in simulation results. This paper gives a precise area fraction model and a completely circumstance-dependent local porosity model to more properly calculate grid porosity and local porosity

respectively. These models were validated by the DEM simulation test on a small-scale bubbling fluidized system

using fine-grid size of two particle diameters. The simulated bubble shape and size were close to the measurement. Simulations showed that DEM could perform well in modeling time-varying waveforms for the bed layer height

when using the precise area fraction model and the local porosity model.

关键词

Keywords

references

Views

299

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

DEM simulation of particle clustering characteristics in gas-solid CFB risers

Study on flow mechanism of binary particles with large differences in draft tube fluidized beds

Numerical simulation study of liquid-solid fluidized beds based on second-order moment model of particle dynamic restitution coefficient

Development of cloudy gas-liquid fluidized bed ethylene polymerization process and high performance products

Experiment study of jetting characteristic in gas-solid fluidized bed using X-ray computed tomography

Related Author

WU Yingya

PENG Li

HE Ningning

GAO Jinsen

LAN Xingying

LI Lingyu

JIN Weixing

WU Zhaolong

Related Institution

State Key Laboratory of Heavy Oil Processing, China University of Petroleum

Sinopec Petrochemical Science Research Institute Co., Ltd.

State Key Laboratory of Continental Shale Oil, School of Petroleum Engineering, Northeast Petroleum University

College of Chemical and Biological Engineering, Zhejiang University

⁰