Effect of microchannel inlet configuration on Taylor bubble formation in microreactors

DANG Minhui; REN Mingyue; CHEN Guangwen

doi:10.3969/j.issn.0438-1157.2014.03.006

您当前的位置：

首页 >

文章列表页 >

Effect of microchannel inlet configuration on Taylor bubble formation in microreactors

更新时间：2025-12-10

- Effect of microchannel inlet configuration on Taylor bubble formation in microreactors
- CIESC Journal Issue 3, Pages: 805-812(2014)
- 作者机构：
  
  1. 中国科学院大连化学物理研究所,辽宁,大连,116023
  2. 中国科学院大学,北京,100049
- 作者简介：
- 基金信息：
  
  supported by the National Natural Science Foundation of China (21225627, 21106141).
- DOI：10.3969/j.issn.0438-1157.2014.03.006
  CLC： 359.1
- Online First：05 March 2014，
  
  Published：05 March 2014
- 稿件说明：
移动端阅览
DANG Minhui, REN Mingyue, CHEN Guangwen. Effect of microchannel inlet configuration on Taylor bubble formation in microreactors[J]. CIESC Journal, 2014, (3): 805-812.
DOI：

DANG Minhui, REN Mingyue, CHEN Guangwen. Effect of microchannel inlet configuration on Taylor bubble formation in microreactors[J]. CIESC Journal, 2014, (3): 805-812. DOI： 10.3969/j.issn.0438-1157.2014.03.006.

摘要

采用计算流体力学方法，考察了微通道入口结构、气液比及两相混合速度对Taylor气泡形成过程的影响，模拟结果与可视化实验符合良好。与单纯流体体积法相比，水平集法（level set）和流体体积法（volume of fluid）相耦合的方法（coupled level set and volume of fluid method，CLSVOF）可获得更精确的气液界面，且CLSVOF法结果与实验结果更符合。数值模拟结果发现，通道入口结构及气液比对气泡长度、气泡生成频率及气泡体积有很大影响。气液比恒定，不同通道入口结构，两相混合速度对气泡长度有不同影响。

Abstract

The effects of microchannel inlet configuration

gas-liquid flow ratio and two-phase mixture velocity on Taylor bubble formation were investigated via computational fluid dynamics (CFD) method

and the simulated values were in good agreement with the visualization experimental results. Compared with the volume of fluid method (VOF)

the coupled level set and volume of fluid method (CLSVOF) could get a more accurate gas-liquid interface

and the bubbles obtained by the CLSVOF method were more consistent with the experimental measurements. The results of numerical simulation showed that microchannel inlet configuration and gas-liquid flow ratio had a great influence on bubble length

bubble generation frequency and bubble volume. For the same gas-liquid flow ratio and different inlet configurations

two-phase mixture velocity had different effects on bubble length.

关键词

Keywords

references

Views

369

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical simulation of gas-liquid two-phase flow in hydrodynamically focused microchannels

Review of research on liquid cooling technology for data centers

Synergistic mechanism in open microchannel and jet impingement hybrid cooling system

Liquid-liquid mixing characteristics of Bunsen reaction products in microchannels

Two-phase flow of emulsion flooding and its influencing factors in porous media

Related Author

LÜ Jianhua

LI Pin

GAO Mengfan

YIN Minghai

YANG Lei

YANG Hui

XU Jingfang

ZHU Xiujuan

Related Institution

School of Chemical Engineering, Hebei University of Technology

School of Environmental and Energy Engineering, Beijing University of Civil Engineering and Architecture

Digital Infrastructure Institute, Shanghai Posts Telecommunications Design Consulting Institute Company Limited

National Engineering Research Center for Residential Buildings and the Living Environment, China Architecture Design and Research Group

State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University

⁰