Optimizing extraction process of heavy metals in fly ash using saponins by response surface methodology

CHEN Yu; XU Ying; FENG Yueyang

doi:10.3969/j.issn.0438-1157.2014.02.047

您当前的位置：

首页 >

文章列表页 >

Optimizing extraction process of heavy metals in fly ash using saponins by response surface methodology

更新时间：2025-12-10

- Optimizing extraction process of heavy metals in fly ash using saponins by response surface methodology
- CIESC Journal Issue 2, Pages: 701-710(2014)
- 作者机构：
  
  1. 河海大学浅水湖泊综合治理与资源开发教育部重点实验室,江苏,南京,210098
  2. 河海大学环境学院,江苏,南京,210098
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.02.047
  CLC： 524
- Online First：05 February 2014，
  
  Published：05 February 2014
- 稿件说明：
移动端阅览
CHEN Yu, XU Ying, FENG Yueyang. Optimizing extraction process of heavy metals in fly ash using saponins by response surface methodology[J]. CIESC Journal, 2014, (2): 701-710.
DOI：

CHEN Yu, XU Ying, FENG Yueyang. Optimizing extraction process of heavy metals in fly ash using saponins by response surface methodology[J]. CIESC Journal, 2014, (2): 701-710. DOI： 10.3969/j.issn.0438-1157.2014.02.047.

摘要

通过响应面法对皂角苷浸提飞灰中Cu、Zn、Pb和Cd 4种重金属的实验条件进行优化，选取pH、皂角苷浓度、离子强度、温度、时间和固液比6个因素进行中心组合设计，使用design-expert8.0软件进行数据拟合，建立了Cu、Zn、Pb和Cd去除总量的工艺数学模型，通过方差分析得到6个因素对浸提液中4种重金属去除总量的主效应关系为： pH>固液比>离子强度>皂角苷浓度>温度>时间。对重金属去除总量数据进行design-expert8.0软件优化，得到皂角苷浓度为41.2g·L-1、时间为13.54 h、离子强度为0.64 mol·L-1、pH为2、固液比为1%和温度为23.4℃时，重金属总去除量达最大值，Cu、Zn、Pb和Cd的去除率分别达到55.12%、6.20%、17.80%和78.11%。

Abstract

The extraction process of heavy metals in fly ash from MSW incinerator using saponin was optimized by response surface methodology. The pH

saponin concentration

ionic strength

temperature

extraction time and solid-liquid ratio were selected for central composite design

the design-expert8.0 software was employed for data fitting to establish a mathematical model for total Cu

Pb and Cd removal. By analysis of mean square deviation the order of main factors affecting the removal of total heavy metals is: pH> solid-liquid ratio> ionic strength> the saponin concentration> temperature>extraction time. The experimental results show that when saponin concentration is 41.2g · L-1

time 13.54 h

onic strength 0.64 mol · L-1

pH 2

solid-liquid ratio 1% and temperature is 23.4℃

the total removal of heavy metals reaches the maximum and the removal rates for Cu

Pb and Cd are 55.12%

6.20%

17.80% and 78.11% respectively.

关键词

Keywords

references

Views

362

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Multi-objective optimization of amine-based desulfurization regeneration system integrated with heat pump technology

Multi-objective optimization and performance analysis of structural parameters of open stern shaft lip seal

High-efficiency adsorption of heavy metal ions by Na2S modified biochar: preparation and adsorption mechanism

Recent advances on the speciation distribution of heavy metals in sludge pyrolysis residue

Effect of particle size on phosphorus and heavy metals during the preparation of biochar from food waste biogas residue

Related Author

LI Xuewen

WANG Zhihong

GAO Yang

WU Ming'ou

MA Wenhao

TAN Renmin

GONG Zhichao

LI Shuangxi

Related Institution

Natural Gas Research Institute, PetroChina Southwest Oil & Gasfield Company

Central Sichuan Oil & Gas Field, PetroChina Southwest Oil & Gasfield Company

School of Chemistry and Chemical Engineering, Southwest Petroleum University

College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology

School of Municipal and Environmental Engineering, Shandong Jianzhu University

⁰