Heat transfer enhancement and drag reduction with rod for flow around cylinder

ZHANG Xidong; HUANG Hulin

doi:10.3969/j.issn.0438-1157.2014.02.017

您当前的位置：

首页 >

文章列表页 >

Heat transfer enhancement and drag reduction with rod for flow around cylinder

更新时间：2025-12-10

- Heat transfer enhancement and drag reduction with rod for flow around cylinder
- CIESC Journal Issue 2, Pages: 488-494(2014)
- 作者机构：
  
  南京航空航天大学高新技术研究院,江苏,南京,210016
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.02.017
  CLC： K121
- Online First：05 February 2014，
  
  Published：05 February 2014
- 稿件说明：
移动端阅览
ZHANG Xidong, HUANG Hulin. Heat transfer enhancement and drag reduction with rod for flow around cylinder[J]. CIESC Journal, 2014, (2): 488-494.
DOI：

ZHANG Xidong, HUANG Hulin. Heat transfer enhancement and drag reduction with rod for flow around cylinder[J]. CIESC Journal, 2014, (2): 488-494. DOI： 10.3969/j.issn.0438-1157.2014.02.017.

摘要

以圆柱上游布置扰动体的双钝体绕流模式为研究对象，通过有限体积法数值研究了Reynolds数Re=1000时钝体直径比（d/D）、间隙率（S/D）对双钝体系统传热性能和系统阻力的影响规律。结果表明，小直径扰钝体对系统的对流换热更为有利，且系统的对流换热随间隙率的增大而递增。以等直径双钝体（d/D=1）系统为基准，总换热增长量（HI）随间隙率和扰动体直径的增大而减小，且间隙率小于临界值（S/D=4）时换热增长量波动比较明显。当d/D=0.1，S/D≥5时，系统的换热增长量为22.3%～25%，且此时系统的流动阻力可减小约40%，这表明上游小直径扰动体的利用在增强系统换热性能的同时也减小了系统的阻力。

Abstract

The influence of rod diameter d/D and center-to-center spacing ratio S/D on the forced convective heat transfer and flow drag for two isothermal cylinders in tandem arrangement are numerically investigated using a finite volume method for the three-dimensional channel. The working fluid is the eutectic alloy GaInSn. The convective heat transfer is much stronger as rod diameter decreases and as center-to-center spacing ratio increases. The overall increment of heat transfer decreases with the increase of center-to-center spacing ratio and rod diameter. Moreover

the overall increment of heat transfer fluctuates when the center-to-center spacing ratio is less than the critical value S/D=4. The overall increment of heat transfer is 22.3%—25%

and the system drag (including the rod and cylinder drags) is reduced by 40% at d/D = 0.1 and S/D≥5

indicating that the utilization of small rod to disturb the fluid can enhance the heat transfer and reduce the drag.

关键词

Keywords

references

Views

319

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental study of heat transfer enhancement by pressure waves in cross flow tube bundles

Effects of cylindrical particle structure modification on the flow and heat transfer characteristics in packed beds

Experimental study on convection heat transfer characteristics of supercritical carbon dioxide flowing in mini square channels

Heat transfer characteristics of interwoven network minichannel heat sinks

Effect of different heating power on flow and convective heat transfer characteristics of triangle micro pin fins

Related Author

ZHAO Linkun

GUO Xijian

DENG Jianqiang

BAO Xing

GUO Xueyan

WU Luochang

YANG Zeyu

YAN Jianguo

Related Institution

School of Chemical Engineering and Technology, Xi’an Jiaotong University

Shaanxi Key Laboratory of Energy Chemical Process Intensification

School of Energy and Power Engineering, University of Shanghai for Science and Technology

State Key Laboratory of Eco-hydraulics in Northwest Arid Region, Xi’an University of Technology

School of Low-carbon Energy and Power Engineering, China University of Mining and Technology

⁰