Spinel-type manganese oxide Li1.6Mn1.6O4 was prepared. It was mixed with poly(vinylidene fluoride) (PVDF) and flat membrane was obtained for recovering lithium from lithium-containing waters by a solvent exchange method. After the membrane was treated with an HCl solution it can uptake lithium. A series of experiments for examining its adsorption and reuse were carried out. Results showed that when membrane M-10-55[Li] was treated with 0.5 mol·L-1 HCl solution for 2 h
the lithium extraction reached equilibrium and about 95% lithium was extracted
and the rate of manganese dissolution was about 3.5%. The membrane M-10-55[H] obtained showed good performance in adsorption capacity to Li+ (about 41 mg·g-1)
and when used for the fifth time it still had an adsorption capacity of 35 mg·g-1. The membrane can selectively adsorb Li+ better compared with Na+
K+
Mg2+ and Ca2+. It is potential to be used in enrichment and recovery of lithium from seawater and other liquid lithium sources.
Electrochemical performance of Li3VO4 modified Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials
Composite materials of Li2ZrO3 coated LiNi0.8Co0.1Mn0.1O2 and its electrochemical properties
Preparation and adsorption properties of porous doped titanium series
Effects of Cr-doping on structure and electrochemical performance of lithiumand manganese-rich cathode materials Li1.2Ni0.2Mn0.6O2
Recent progress on metal-organic framework membranes towards uranium separation from seawater
Related Author
SONG Liubin
TANG Fuli
XIAO Zhongliang
SONG Liubin
LIU Jiao
XIAO Zhongliang
LI Lingjun
CAO Zhong
Related Institution
School of Chemistry and Biological Engineering, Changsha University of Science and Technology
Hunan Provincial Key Laboratory of Materials Protection for Electric Power and Transportation, School of Chemistry and Biological Engineering, Changsha University of Science and Technology
College of Materials Science and Engineering, Changsha University of Science and Technology
College of Chemical Engineering, Qingdao University of Science and Technology
College of Materials Science and Engineering, Jiangsu University