Flow visualization through channels in plate-and-frame modules

WANG Tao; ZHAN Xia; LI Jiding

doi:10.3969/j.issn.0438-1157.2014.01.009

您当前的位置：

首页 >

文章列表页 >

Flow visualization through channels in plate-and-frame modules

更新时间：2025-12-10

- Flow visualization through channels in plate-and-frame modules
- CIESC Journal Issue 1, Pages: 71-77(2014)
- 作者机构：
  
  1. 清华大学化学工程系, 化学工程联合国家重点实验室,北京,100084
  2. 北京工商大学食品学院,北京,100048
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2014.01.009
  CLC： Q021.1
- Online First：05 January 2014，
  
  Published：05 January 2014
- 稿件说明：
移动端阅览
WANG Tao, ZHAN Xia, LI Jiding. Flow visualization through channels in plate-and-frame modules[J]. CIESC Journal, 2014, (1): 71-77.
DOI：

WANG Tao, ZHAN Xia, LI Jiding. Flow visualization through channels in plate-and-frame modules[J]. CIESC Journal, 2014, (1): 71-77. DOI： 10.3969/j.issn.0438-1157.2014.01.009.

摘要

自行设计了透明的有机玻璃膜组件，用于直接观测组件内部流体流动状态。分别测定了空流道和含有料液隔网流道的压力损失，并根据摩擦因子f随Re值的变化曲线确定了临界Reynolds数（Rec）的范围。结果表明，含有料液隔网流道的Rec相比空流道大大减小。利用注射颜料的方法对流体流动情况进行观测，验证了上述结果。随后测定了表面粗糙度、隔网排布形式、孔隙率对流体流动情况的影响。最后，自制小型卷式膜进行测试，结果与平板膜的压力损失情况相符，表明平板膜的实验结果可以用于预测卷式膜的行为。

Abstract

A Perspex test cell was made to observe the flow regime directly in plate-and-frame modules under different conditions. The pressure drops in channels with and without spacer were examined. The critical Reynolds number(Rec) were determined with the correlations for Re and friction factors. The results showed that Rec in the spacer filled channel was much smaller than that in the empty one

indicating that the turbulence regime was reached at lower fluid velocity. The results were verified through the dye injecting method. Channels with different surface roughness

spacer arrangement and spacer porosity were also investigated. Finally

a laboratory scale spiral-wound module was made and a similar pressure drop situation was obtained

which confirms that the method is also suitable for the spiral-wound modules.

关键词

Keywords

references

Views

1067

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Deformation and fragmentation characteristics of liquid marbles under the action of non-uniform electric field

Impact of ammonia energy fraction on combustion characteristics of ammonia-diesel hybrid fuel under CO2/O2 atmosphere

Boosting CO2 separation of Pebax membranes with synergistic effect of vacancies and defects

Efficient separation of phosphorylated sugars and high-concentration phosphate by nanofiltration

Related Author

CHEN Yuan

ZHENG Shiyuan

LI Yuntang

XIONG Dianfeng

WANG Bingqing

PENG Xudong

CAO Xue

ZUO Ziwen

Related Institution

College of Mechanical and Electical Engineering, China Jiliang University

AECC Changjiang Engine Co., Ltd.

College of Mechanical Engineering, Zhejiang University of Technology

School of Energy and Power Engineering, Jiangsu University

Beijing Engineering Research Center of Monitoring for Construction Safety, Beijing University of Civil Engineering and Architecture

⁰