WANG Weixia, ZHOU Shuai, SHI Yaoqi, et al. Preparation and properties of polypropylene modified by grafting styrene[J]. CIESC Journal, 2013, (S1): 175-181.
DOI:
WANG Weixia, ZHOU Shuai, SHI Yaoqi, et al. Preparation and properties of polypropylene modified by grafting styrene[J]. CIESC Journal, 2013, (S1): 175-181.DOI: 10.3969/j.issn.0438-1157.2013.z1.027.
Preparation and properties of polypropylene modified by grafting styrene
melt isotatic polypropylen (iPP) was grafted with styrene (St) by reactive extrusion process. The effects of St concentration on oscillatory shear rheology
foaming and thermal properties were comparatively evaluated. That Sts were grafted onto PP was comfirmed by FTIR
GPC and MFR. The results of DSC showed that the crystallization temperatures of grafted PPs were higher than that of iPP (maximum 15.4℃). The rheological characteristics of grafted PPs such as higher storage modulus (G')
the obvious shear thinning
a plateat in tan δ-ω plot at low frequency proved that the long chain branches have been added to the PP molecules. As the melt flow rate of grafted PP was reduced
i.e. the melt strength increased
the bubble pore of grafted PP was more regular than that of iPP.
Performance of alkali metal-loaded SrMnO3 oxygen carriers in chemical looping oxidative dehydrogenation of ethylbenzene
Study on oxidation of styrene with molecular oxygen catalyzed by MoO2/Ag on polyionic liquid
Preparation of attapulgite/polystyrene hybrid particles via simultaneous reverse and normal initiation atom transfer radical polymerization
Dynamic surface tension of surfactant-free emulsion polymerization system of styrene and methyl methacrylate in aqueous solution of poly(ethylene glycol)
Study on entropy wave production and dissipation in partially premixed swirl flames subject to inlet perturbations
Related Author
ZHU Xing
ZHANG Wangyixin
ZHANG Juping
QU Yongfang
LIU Yong
SU Miaojun
LI Dahuan
WU Yuefeng
Related Institution
State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, School of Metallurgical and Energy Engineering, Kunming University of Science and Technology
College of Chemistry and Chemical Engineering, Henan University
National Experimental Demonstration Center for Materials Science and Engineering, School of Materials Science and Engineering, Changzhou University
School of Mechanical Technology, Wuxi Institute of Technology