Process system fault detection and diagnosis based on correlation

WANG Zaiying; BAI Huaning

doi:10.3969/j.issn.0438-1157.2013.12.052

您当前的位置：

首页 >

文章列表页 >

Process system fault detection and diagnosis based on correlation

更新时间：2025-12-10

- Process system fault detection and diagnosis based on correlation
- CIESC Journal Issue 12, Pages: 4621-4627(2013)
- 作者机构：
  
  1. 西安科技大学电气与控制工程学院,陕西,西安,710054
  2. 山西省煤炭运销集团,山西,太原,030002
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0438-1157.2013.12.052
  CLC： P273
- Online First：05 December 2013，
  
  Published：05 December 2013
- 稿件说明：
移动端阅览
WANG Zaiying, BAI Huaning. Process system fault detection and diagnosis based on correlation[J]. CIESC Journal, 2013, (12): 4621-4627.
DOI：

WANG Zaiying, BAI Huaning. Process system fault detection and diagnosis based on correlation[J]. CIESC Journal, 2013, (12): 4621-4627. DOI： 10.3969/j.issn.0438-1157.2013.12.052.

摘要

故障检测和故障诊断对提高控制系统的安全性具有重要意义。通过对过程变量之间的相关性变化与过程装置故障之间关系进行深入分析，提出了一种基于过程变量相关系数约束的过程故障诊断方法。对相关过程变量定义基于相关系数（含相关系数、多重相关系数、偏相关系数）约束的过程诊断函数，通过考察相关系数和诊断函数的变化，对与其所涉及变量相关的装置是否发生故障做出判断。如果装置或系统发生故障，则会引起相关系数和诊断函数值发生变化，可通过诊断函数值进行逻辑推断，最终确定故障位置和故障装置。最后通过一个精馏塔的实际工程案例，验证了该方法的有效性。

Abstract

The fault detection and diagnosis is very important for a security of control systems.By analyzing deeply on the relationship between changes associated with process variables and between the device failure

a diagnosis technique is presented for process fault based on the correlation coefficient in process variables.The process diagnosis function is defined for interrelated variables based on the correlation coefficient (correlation coefficient

multi-correlation coefficient

partial correlation coefficient) constraints

whether the involved devices and instruments are fault is estimated according to the correlation coefficient change variety.If a fault in device or system occurs

the correlation coefficient and the diagnosis function changes will be caused

the fault location and the failure equipments are determined by logic analysis for diagnosis function value.Finally

the validity of the method is verified with a distillation column practical engineering case.

关键词

Keywords

references

Views

561

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Fault diagnosis of cathode material sintering based on temporal graph convolutional network

A two-stage dual-channel deep learning model for chemical fault classification

Chemical process fault detection and risk early warning based on SlowFast-Transformer

Advances in separation technologies for difficult-to-separate systems in petrochemical industry

Simultaneous optimization of pressure operating path and heat exchange matches in work and heat integration

Related Author

YANG Peng

CHEN Ning

LIU Yuepeng

XIE Muyan

LIU Xiuyue

ZHANG Jiaxin

SONG Chaoyang

DONG Lichun

Related Institution

School of Automation, Central South University

National Engineering Research Centre of Advanced Energy Storage Materials

School of Chemistry and Chemical Engineering, Chongqing University

College of Chemical Engineering, Hebei Normal University of Science and Technology

College of Chemistry and Chemical Engineering, Xi’an University of Science and Technology

⁰