By using supercritical carbon dioxide as physical foaming agent
microcellular poly(lactic acid)/wood fiber(PLA/WF)composite foams were prepared in a batch process via depressurization.The cellular structures of the foamed PLA/WF composites were observed by means of scanning electron microscope.The effect of WF content on cellular structure was investigated by analyzing the microstructure and rheological properties of the PLA/WF composites.The addition of WF induced higher storage modulus and complex viscosity of the PLA/WF composites in the low frequency range
resulting in much more uniform cellular structure.Cell density increased and cell size decreased gradually with the increase of WF content.The uniformity of cellular shape and structure was high for the foamed composite sample with 10%(mass) WF
whereas the uniformity decreased for those with 20% and 30% WF.
van der Waals' force effect on viscoelasticity of Lennard-Jones fluid
Numerical simulation on in-mold micro assembly molding process based on viscoelastic thermal fluid structure coupling
Formation and size prediction of slug droplet in viscoelastic fluid in flow-focusing microchannel
Research progress on stereocomplex crystallization of poly(lactic acid) enantiomeric blends
Effects of crosslinking agent on rheological properties of poly(lactic acid) and cellular structure of its microcellular foams
Related Author
ZHAO Lingling
JI Jiayuan
JIANG Xiannian
LUO Zhi
YANG Peimin
ZHOU Guofa
ZHANG Qindan
FU Taotao
Related Institution
Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy & Environment, Southeast University
School of Resources, Environmental and Chemical Engineering, Nanchang University
School of Chemical Engineering and Technology, State Key Laboratory of Chemical Engineering, Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin University
State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University
College of Chemical Engineering, Qingdao University of Science and Technology