TENG Houxing, ZHANG Jinjun. Viscoelasto-thixotropic model for waxy crude[J]. CIESC Journal, 2013, (11): 3968-3975.
DOI:
TENG Houxing, ZHANG Jinjun. Viscoelasto-thixotropic model for waxy crude[J]. CIESC Journal, 2013, (11): 3968-3975.DOI: 10.3969/j.issn.0438-1157.2013.11.012.
Waxy crude oil shows complex rheological behavior below gelation temperature
such as viscoelasticity
yield stress and thixotropy
owing to the formation of three dimensional sponge-like interlocking network structure.Traditional thixotropic models for waxy crude do not consider the viscoelastic behavior near and/or before yield point.To address this problem
a new thixotropic model with ten independent parameters was proposed.The new model consists of an equation of state and a structural kinetic equation.The total stress is composed of viscous stress and elastic stress.Elastic stress is assumed to be the product of shear modulus and shear strain
and shear modulus varies proportionally to structural parameter and a non-linear damping function.The evolution of structural parameter is described by a new kinetic equation whose breakdown term is assumed to be dependent on energy dissipation rate
to overcome the shortcoming of the kinetic equation whose breakdown term is assumed to be dependent on shear rate.The proposed model was validated by stepwise shear rate tests and hysteresis loop tests of Daqing waxy crude.The proposed model nicely described the viscoelasticity and thixotropy of waxy crude
and for the two kinds of test
the average absolute deviations(AADs)between fitted and measured values were within 2.0% and 5.0%
respectively.The model was further validated by predicting the transient flow curve of hysteresis loop test with the model parameters obtained from the stepwise shear rate measurement
and the results showed that the agreement between the predictions and measurements is acceptable
van der Waals' force effect on viscoelasticity of Lennard-Jones fluid
Numerical simulation on in-mold micro assembly molding process based on viscoelastic thermal fluid structure coupling
Formation and size prediction of slug droplet in viscoelastic fluid in flow-focusing microchannel
Cellular structure of microcellular poly(lactic acid)/wood fiber composite foams
Influence of viscoelasticity on liquid primary atomization
Related Author
ZHAO Lingling
JI Jiayuan
JIANG Xiannian
ZHOU Guofa
YANG Peimin
LUO Zhi
FU Taotao
MA Youguang
Related Institution
Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy & Environment, Southeast University
School of Resources, Environmental and Chemical Engineering, Nanchang University
School of Chemical Engineering and Technology, State Key Laboratory of Chemical Engineering, Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin University
Center for Polymer Processing Equipment and Intellectualization, South China University of Technology
Key Laboratory of Coal Gasification of Ministry of Education, East China University of Science and Technology, Shanghai Engineering Research Center of Coal Gasification